U1407 Dodge Code - Implausible Engine Torque Request Signal Received
Quick Answer
The U1407 code for Dodge vehicles refers to an "Implausible Engine Torque Request Signal Received." This code indicates that the engine control module (ECM) has detected a discrepancy between the expected engine torque requested by the driver (via throttle input) and the actual torque being produced by the engine. Common causes include Malfunctioning throttle position sensor, Faulty accelerator pedal position sensor, Wiring or connection issues between sensors and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1407 Dodge indicates Implausible Engine Torque Request Signal Received.
- Common causes
- Common causes include Malfunctioning throttle position sensor, Faulty accelerator pedal position sensor, Wiring or connection issues between sensors and ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U1407 Dodge Description
The U1407 code for Dodge vehicles refers to an "Implausible Engine Torque Request Signal Received." This code indicates that the engine control module (ECM) has detected a discrepancy between the expected engine torque requested by the driver (via throttle input) and the actual torque being produced by the engine. This discrepancy can lead to various performance issues and potentially impact the vehicle's drivability.
Common Causes of U1407 Dodge
- Malfunctioning throttle position sensor
- Faulty accelerator pedal position sensor
- Wiring or connection issues between sensors and ECM
- ECM malfunction
Symptoms of U1407 Dodge
- Hesitation or lack of power during acceleration
- Rough idling or stalling
- Inconsistent engine behavior (surging or struggling to maintain speed)
- Vehicle going into a limp mode
How to Fix U1407 Dodge
- Perform a thorough diagnosis using a professional diagnostic tool to pinpoint the exact cause of the issue.
- Inspect the throttle position sensor and accelerator pedal position sensor for any signs of damage or wear.
- Check the wiring and connections between the sensors and the ECM for any loose or corroded connections.
- If necessary, replace the faulty sensor(s) or repair any damaged wiring.
- Clear the code from the ECM memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix U1407 Dodge
The cost of repairing the U1407 code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. On average, the repair cost for this issue can range from $150 to $400, including parts and labor. It's important to note that the actual cost may be higher or lower based on the location, vehicle make and model, and the extent of the repairs needed. It is recommended to consult with a professional technician for an accurate estimate.
Need more information about the U1407 Dodge code?
Need more information on how to fix the U1407 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1407 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1407 Dodge Code
1. What are the common symptoms of OBDII code U1407 in a Dodge vehicle?
- Common symptoms include engine hesitation, rough idling, decreased performance, and potential stalling.
2. What can cause the OBDII code U1407, "Implausible Engine Torque Request Signal Received," in a Dodge?
- The code U1407 can be triggered by issues with the throttle position sensor, engine control module, wiring problems, or software glitches.
3. How can I diagnose the OBDII code U1407 in my Dodge?
- Diagnosis typically involves using a diagnostic scanner to read the code, checking the related sensors and wiring for faults, and performing a thorough inspection of the engine control system.
4. Is it safe to continue driving with the U1407 code present in my Dodge?
- It is not recommended to drive with the U1407 code active, as it can lead to drivability issues and potential safety concerns. It is advisable to address the issue promptly.
5. Can I reset the U1407 code in my Dodge and see if it comes back?
- While you can clear the code temporarily, it is essential to diagnose and repair the underlying issue causing the U1407 code to prevent it from reoccurring.
6. How much does it typically cost to repair the U1407 code in a Dodge?
- Repair costs for the U1407 code can vary depending on the exact cause of the issue, but they may range from $100 to $500 or more, including parts and labor.
7. Are there any common DIY fixes for the U1407 code in a Dodge?
- DIY fixes for the U1407 code may include checking and cleaning the throttle body, inspecting wiring connections, and ensuring all related components are securely attached.
8. Will the U1407 code cause my Dodge to fail an emissions test?
- Yes, the U1407 code can cause your Dodge to fail an emissions test, as it indicates a problem with the engine control system that can affect emissions levels.
9. Can a U1407 code be intermittent in a Dodge vehicle?
- Yes, the U1407 code can sometimes be intermittent, especially if the issue is related to a loose connection or sensor malfunction that occurs sporadically.
10. How long does it typically take to repair the U1407 code in a Dodge?
- The repair time for the U1407 code can vary depending on the exact cause and complexity of the issue, but it may take anywhere from a few hours to a full day at a repair shop.
Discuss the causes and fixes for U1407 Dodge OBDII Code
Code U1407 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.