Engine-Codes.com
Engine-Codes – Infiniti – U1325 Infiniti

U1325 Infiniti Code - Automatic Back Door Control Module Calibration

Quick Answer

The U1325 diagnostic trouble code (DTC) pertains specifically to the Automatic Back Door Control Module Calibration in Infiniti vehicles. Common causes include Faulty Automatic Back Door Control Module that requires calibration or replacement, Misalignment or obstruction of the liftgate sensors, preventing proper operation, Damaged or corroded wiring in the harness connecting the control module to the vehicle. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U1325 Infiniti indicates Automatic Back Door Control Module Calibration.
Common causes
Common causes include Faulty Automatic Back Door Control Module that requires calibration or replacement, Misalignment or obstruction of the liftgate sensors, preventing proper operation, Damaged or corroded wiring in the harness connecting the control module to the vehicle.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code U1325 Infiniti Description

The U1325 diagnostic trouble code (DTC) pertains specifically to the Automatic Back Door Control Module Calibration in Infiniti vehicles. This code indicates that the control module responsible for the operation of the automatic back door (often referred to as a power liftgate) is not calibrated correctly or is experiencing a malfunction. The automatic back door system is designed to enhance convenience, allowing the rear hatch to open and close with minimal effort, often triggered by a button or remote key fob.

OBDII Code U1325 Infiniti - Automatic Back Door Control Module Calibration
U1325 Infiniti Code - Automatic Back Door Control Module Calibration

Common Causes of U1325 Infiniti

  1. Faulty Automatic Back Door Control Module that requires calibration or replacement.
  2. Misalignment or obstruction of the liftgate sensors, preventing proper operation.
  3. Damaged or corroded wiring in the harness connecting the control module to the vehicle.
  4. Software issues or glitches in the vehicle’s onboard computer systems affecting the liftgate operation.
  5. Environmental factors such as moisture or dirt infiltration into the control module or sensors.

Symptoms of U1325 Infiniti

  1. The automatic back door fails to open or close when activated.
  2. Intermittent operation of the liftgate, where it may work sporadically.
  3. Warning lights illuminated on the dashboard, indicating a malfunction in the liftgate system.
  4. Unusual noises coming from the liftgate area when attempting to operate it.
  5. The liftgate may open or close partially, stopping before reaching its full range of motion.

How to Fix U1325 Infiniti

  1. Diagnostic Scan: Begin by using an OBD-II scanner to confirm the U1325 code and check for any additional codes that may provide further insight into the issue.
  2. Inspect Wiring and Connectors: Examine the wiring harness and connectors associated with the Automatic Back Door Control Module for signs of damage, corrosion, or loose connections.
  3. Sensor Alignment Check: Ensure that the liftgate sensors are correctly aligned and free from obstructions that could interfere with their operation.
  4. Control Module Calibration: If the control module is functioning but not calibrated correctly, follow the manufacturer’s procedure for recalibrating the module, which may involve specific software tools.
  5. Replace Components if Necessary: If the control module or sensors are found to be faulty, replace them with OEM parts to ensure compatibility and reliability.

Cost to Fix U1325 Infiniti

The cost to address the U1325 code can vary significantly based on the specific diagnosis and repair steps required. On average, repairs may range from $200 to $800, including parts and labor. The control module itself can cost between $150 to $400, while labor rates typically range from $80 to $150 per hour. It is important to note that labor rates can vary based on location, vehicle make and model, and engine type. Metropolitan areas or dealerships may charge higher rates, while independent shops often offer more competitive pricing. For a more accurate estimate, it is advisable to check local rates and obtain quotes from several repair shops.

Need more information about the U1325 Infiniti code?

Need more information on how to fix the U1325 Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1325 Infiniti code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1325 Infiniti Code

1. What does the OBDII code U1325 for Infiniti indicate?

The code U1325 in an Infiniti refers to a fault in the Automatic Back Door Control Module Calibration.

2. What are common symptoms of the U1325 code in an Infiniti?

Common symptoms of the U1325 code may include issues with the automatic back door not operating properly, such as failing to open or close as expected.

3. What are possible causes of the U1325 code in an Infiniti?

Possible causes of the U1325 code may include a malfunctioning control module, wiring issues, or a need for recalibration of the back door system.

4. How can I diagnose the U1325 code in my Infiniti?

Diagnosing the U1325 code typically involves using a diagnostic scanner to retrieve the code and then inspecting the back door control module and related wiring for any visible damage or issues.

5. Can I repair the U1325 code in my Infiniti myself?

If you have the necessary tools and expertise, you may be able to repair the U1325 code yourself by addressing the specific cause of the issue, such as replacing a faulty control module or recalibrating the back door system.

6. Is it safe to continue driving with the U1325 code present in my Infiniti?

It is generally not recommended to continue driving with the U1325 code present, as it may lead to further issues with the automatic back door operation and potentially compromise vehicle safety.

7. How much does it typically cost to repair the U1325 code in an Infiniti?

The cost of repairing the U1325 code in an Infiniti can vary depending on the specific cause of the issue and whether you choose to repair it yourself or seek professional help. Costs may range from a few hundred dollars to over a thousand dollars.

8. Can the U1325 code in an Infiniti be a recurring issue?

If the root cause of the U1325 code is not properly addressed during repair, it is possible for the issue to recur. Proper diagnosis and comprehensive repair are crucial to prevent the code from reappearing.

9. Are there any preventive measures to avoid the U1325 code in an Infiniti?

Regular maintenance and inspection of the automatic back door system in your Infiniti can help prevent issues that may trigger the U1325 code. Keeping the system clean and lubricated can also contribute to its proper functioning.

10. How long does it take to repair the U1325 code in an Infiniti?

The repair time for the U1325 code can vary depending on the specific cause and complexity of the issue. Simple fixes like recalibration may take a short time, while more extensive repairs could require several hours or even days to complete.

Discuss the causes and fixes for U1325 Infiniti OBDII Code

Submit a New Comment

Code U1325 Infiniti comments

No comments found for this page.