U11EE Code - Lost Communication With Right C-Pillar Impact Acceleration Sensor
Quick Answer
The U11EE diagnostic trouble code indicates that the vehicle has lost communication with the right C-pillar impact acceleration sensor. Common causes include Faulty wiring or connections to the right C-pillar impact acceleration sensor, Sensor malfunction or failure, Corrosion or damage to sensor components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11EE indicates Lost Communication With Right C-Pillar Impact Acceleration Sensor.
- Common causes
- Common causes include Faulty wiring or connections to the right C-pillar impact acceleration sensor, Sensor malfunction or failure, Corrosion or damage to sensor components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U11EE Description
The U11EE diagnostic trouble code indicates that the vehicle has lost communication with the right C-pillar impact acceleration sensor. This sensor is crucial for detecting impacts on the right side of the vehicle and providing data to the airbag system to deploy the appropriate safety measures in the event of a collision. When communication with this sensor is lost, it can compromise the effectiveness of the airbag system and other safety features, potentially putting occupants at risk in the event of an accident.
Common Causes of U11EE
- Faulty wiring or connections to the right C-pillar impact acceleration sensor
- Sensor malfunction or failure
- Corrosion or damage to sensor components
- Software or communication issues within the vehicle's control module
- Vehicle collision or impact causing damage to the sensor or related components
Symptoms of U11EE
- Airbag warning light illuminated on the dashboard
- Inoperative airbag system
- Erratic behavior of other safety systems
- Vehicle may fail safety inspections
- Reduced overall safety of the vehicle
How to Fix U11EE
- Inspect wiring and connections to the right C-pillar impact acceleration sensor for any damage or corrosion.
- Test the sensor itself to determine if it is functioning properly.
- Replace the sensor if it is found to be faulty.
- Clear the diagnostic trouble code from the vehicle's control module.
- Conduct a thorough system check to ensure proper communication and functionality of the airbag system.
Cost to Fix U11EE
The cost of repairing a lost communication issue with the right C-pillar impact acceleration sensor can vary depending on the specific cause of the problem. In general, the cost of parts for a new sensor can range from $100 to $300, while labor costs can add an additional $100 to $200. Overall, the total repair cost could fall within the range of $200 to $500. It's advisable to consult with a qualified mechanic or repair shop for a more accurate estimate based on the vehicle's make and model, as well as local labor rates.
Need more information about the U11EE code?
Need more information on how to fix the U11EE code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11EE code diagnosed by a professional: Find a repair shop in your area
Code U11EE Information for Specific Makes
- U11EE Chrysler — Lost Communication With Right C-Pillar Impact Acceleration Sensor
- U11EE Dodge — Lost Communication With Right C-Pillar Impact Acceleration Sensor
- U11EE Fiat — Lost Communication With Right C-Pillar Impact Acceleration Sensor
- U11EE Jeep — Lost Communication With Right C-Pillar Impact Acceleration Sensor
- U11EE RAM — Lost Communication With Right C-Pillar Impact Acceleration Sensor
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about U11EE Code
1. What are the common symptoms of OBDII code U11EE?
- Common symptoms include the airbag warning light illuminating on the dashboard, disabled airbag system, and potential loss of communication with the right C-pillar impact acceleration sensor.
2. What can cause the OBDII code U11EE to trigger?
- The code U11EE is triggered when there is a communication failure between the vehicle's onboard computer and the right C-pillar impact acceleration sensor, typically due to a wiring issue or sensor malfunction.
3. How serious is the OBDII code U11EE?
- The U11EE code indicates a problem with the vehicle's airbag system, which can compromise passenger safety in the event of a crash. It is important to address this issue promptly to ensure proper airbag functionality.
4. How can I diagnose the cause of OBDII code U11EE?
- Diagnosing the U11EE code involves checking the wiring connections between the onboard computer and the right C-pillar impact acceleration sensor, as well as testing the sensor itself for proper functionality.
5. Can I drive my vehicle with the OBDII code U11EE present?
- It is not recommended to drive the vehicle with the U11EE code present, as the airbag system may not function correctly in the event of a collision. It is best to have the issue diagnosed and repaired as soon as possible.
6. Is it possible to reset the OBDII code U11EE without fixing the underlying issue?
- Resetting the code without addressing the underlying issue will not solve the problem. The code will likely reappear until the communication problem between the onboard computer and the impact sensor is resolved.
7. What are some repair tips for fixing the OBDII code U11EE?
- Repair tips include checking and repairing any damaged wiring, ensuring proper connections between the sensor and the onboard computer, and replacing the right C-pillar impact acceleration sensor if necessary.
8. Can a DIY enthusiast fix the OBDII code U11EE at home?
- Depending on the individual's level of expertise, a DIY enthusiast may be able to diagnose and repair the U11EE code at home by following the vehicle's repair manual and using appropriate tools.
9. How much does it typically cost to repair the OBDII code U11EE?
- The cost of repairing the U11EE code can vary depending on the cause of the issue, the need for replacement parts, and labor costs. It is recommended to obtain multiple quotes from reputable mechanics or repair shops.
10. Will fixing the OBDII code U11EE require a visit to the dealership?
- While visiting a dealership may be necessary for certain repairs, such as sensor replacements, independent mechanics and repair shops with experience in airbag systems can also effectively diagnose and fix the U11EE code.
Discuss the causes and fixes for U11EE OBDII Code
Code U11EE comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.