U11E4 Code - CAN Communication Message Missing
Quick Answer
The U11E4 diagnostic trouble code (DTC) indicates that there is a communication message missing within the Controller Area Network (CAN) system of the vehicle. Common causes include Faulty wiring harness or connectors, Malfunctioning control module, Software glitches in the CAN system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11E4 indicates CAN Communication Message Missing.
- Common causes
- Common causes include Faulty wiring harness or connectors, Malfunctioning control module, Software glitches in the CAN system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U11E4 Description
The U11E4 diagnostic trouble code (DTC) indicates that there is a communication message missing within the Controller Area Network (CAN) system of the vehicle. The CAN system is responsible for allowing various control modules within the vehicle to communicate with each other. When a message is missing, it can disrupt the flow of information between these modules, potentially leading to operational issues.
Common Causes of U11E4
- Faulty wiring harness or connectors
- Malfunctioning control module
- Software glitches in the CAN system
- Electrical interference or short circuits
- Water or moisture entering the CAN system
Symptoms of U11E4
- Check engine light illuminated
- Erratic or rough engine performance
- Transmission shifting issues
- Loss of communication with certain vehicle systems
- Vehicle stalling or not starting
How to Fix U11E4
- Perform a thorough inspection of the wiring harness and connectors for any damage or corrosion.
- Check and diagnose the control modules involved in the communication for faults or malfunctions.
- Scan the vehicle's computer system to identify the specific module or area where the communication message is missing.
- Reset the system and clear the DTC to see if the issue reoccurs.
- If necessary, replace any faulty components or repair any damaged wiring to restore proper communication within the CAN system.
Cost to Fix U11E4
The typical repair costs for addressing a CAN communication message missing issue can range from $100 to $500, depending on the specific cause of the problem and the required repairs. This estimate includes parts and labor, but actual costs can vary based on the extent of the issue and the rates charged by auto repair shops. It's recommended to consult a professional technician for an accurate diagnosis and cost estimate for this repair.
Need more information about the U11E4 code?
Need more information on how to fix the U11E4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11E4 code diagnosed by a professional: Find a repair shop in your area
Code U11E4 Information for Specific Makes
- U11E4 Chrysler — CAN Communication Message Missing
- U11E4 Dodge — CAN Communication Message Missing
- U11E4 Fiat — CAN Communication Message Missing
- U11E4 Jeep — CAN Communication Message Missing
- U11E4 RAM — CAN Communication Message Missing
Frequently Asked Questions about U11E4 Code
1. What are common symptoms of OBDII code U11E4 (CAN Communication Message Missing)?
- Common symptoms include issues with the vehicle's communication system, such as dashboard warning lights, erratic behavior of electronic components, and potential drivability issues.
2. What could cause the OBDII code U11E4 to occur?
- The code U11E4 can be triggered by a fault in the Controller Area Network (CAN) communication system, which may be caused by damaged wiring, loose connections, or a malfunctioning control module.
3. How can I diagnose the cause of OBDII code U11E4?
- Diagnosing the cause of U11E4 involves using a professional OBDII scanner to retrieve the code, checking the communication system's wiring and connections for damage or looseness, and testing the control modules for proper functionality.
4. Are there any repair tips for fixing OBDII code U11E4?
- Repairing U11E4 may involve repairing or replacing damaged wiring, securing loose connections, or replacing faulty control modules. It is recommended to follow manufacturer-specific diagnostic and repair procedures.
5. Can OBDII code U11E4 be cleared/reset, or does it require immediate repair?
- While the code can be cleared/reset using an OBDII scanner, it is important to address the underlying cause of U11E4 to prevent further communication issues and ensure the vehicle's systems operate correctly.
6. Is OBDII code U11E4 a serious issue that requires immediate attention?
- U11E4 indicates a communication problem within the vehicle's systems, which can potentially lead to functionality issues. It is recommended to address the code promptly to avoid further complications.
7. How does OBDII code U11E4 affect the vehicle's performance?
- OBDII code U11E4 can affect the vehicle's performance by causing communication errors between control modules, resulting in warning lights, erratic behavior of electronic components, and potential drivability issues.
8. Can a DIY enthusiast repair OBDII code U11E4, or is professional assistance necessary?
- While some DIY enthusiasts may have the skills to diagnose and repair U11E4, it is recommended to seek professional assistance, especially when dealing with complex communication system issues and control modules.
9. Are there any known recalls or technical service bulletins related to OBDII code U11E4?
- It is advisable to check with the vehicle manufacturer or authorized dealerships for any recalls or technical service bulletins related to OBDII code U11E4, as they may provide relevant information or solutions.
10. How can regular maintenance help prevent OBDII code U11E4 from occurring?
- Regular maintenance, including inspecting and maintaining the vehicle's electrical connections, wiring harnesses, and control modules, can help prevent issues like OBDII code U11E4 by ensuring the communication system functions properly.
Discuss the causes and fixes for U11E4 OBDII Code
Code U11E4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.