U11E2 Chrysler Code - Lost Barometric Pressure Message
Quick Answer
The U11E2 Chrysler diagnostic trouble code (DTC) indicates a "Lost Barometric Pressure Message." This code is typically related to a communication issue within the vehicle's network, specifically the Controller Area Network (CAN) bus system. Common causes include Faulty barometric pressure sensor, Wiring or connector issues in the sensor circuit, ECU communication malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11E2 Chrysler indicates Lost Barometric Pressure Message.
- Common causes
- Common causes include Faulty barometric pressure sensor, Wiring or connector issues in the sensor circuit, ECU communication malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U11E2 Chrysler Description
The U11E2 Chrysler diagnostic trouble code (DTC) indicates a "Lost Barometric Pressure Message." This code is typically related to a communication issue within the vehicle's network, specifically the Controller Area Network (CAN) bus system. The barometric pressure sensor is responsible for measuring the atmospheric pressure outside the vehicle, which is crucial for the engine's air-fuel mixture calculations and overall performance.
Common Causes of U11E2 Chrysler
- Faulty barometric pressure sensor
- Wiring or connector issues in the sensor circuit
- ECU communication malfunction
- Barometric pressure sensor calibration error
- Water intrusion or corrosion in sensor connections
Symptoms of U11E2 Chrysler
- Reduced fuel efficiency
- Rough idling or stalling
- Engine hesitation or lack of power
- Check Engine Light illuminated
- Poor overall engine performance
How to Fix U11E2 Chrysler
- Begin by conducting a visual inspection of the barometric pressure sensor, wiring, and connectors for any visible damage or corrosion.
- Use a multimeter to test the sensor's resistance and voltage output to determine if it is functioning within specifications.
- Check the wiring harness for continuity and repair any damaged wires or connectors.
- If the sensor is deemed faulty, replace it with a new OEM or high-quality aftermarket sensor.
- Clear the DTC with a diagnostic scan tool and perform a test drive to ensure the issue has been resolved.
Cost to Fix U11E2 Chrysler
The cost of repairing a U11E2 Chrysler code can vary depending on the specific cause of the issue. In general, the price of a new barometric pressure sensor ranges from $50 to $150, depending on the vehicle make and model. Labor costs for diagnosis and repair can add an additional $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Overall, the total repair cost for this issue is typically in the range of $150 to $450. It is advisable to consult with a trusted mechanic or dealership for a more accurate estimate based on your vehicle's specific requirements.
Need more information about the U11E2 Chrysler code?
Need more information on how to fix the U11E2 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11E2 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U11E2 Chrysler Code
1. What does the U11E2 code in a Chrysler vehicle mean?
The U11E2 code indicates a Lost Barometric Pressure Message in the vehicle's On-Board Diagnostics system.
2. What are the common symptoms of the U11E2 code?
Common symptoms of the U11E2 code may include poor engine performance, rough idling, and decreased fuel efficiency.
3. What can cause the U11E2 code to trigger in a Chrysler vehicle?
The U11E2 code is typically triggered by a faulty barometric pressure sensor, wiring issues, or a problem with the engine control module.
4. How can I diagnose the U11E2 code in my Chrysler vehicle?
Diagnosing the U11E2 code usually involves using an OBDII scanner to read the code, checking the barometric pressure sensor, and inspecting related wiring for any damage or loose connections.
5. Can I still drive my Chrysler with the U11E2 code present?
It is not recommended to drive your Chrysler with the U11E2 code present, as it can lead to further engine issues and potential damage.
6. How can I repair the U11E2 code in my Chrysler vehicle?
Repairing the U11E2 code may involve replacing the barometric pressure sensor, repairing any damaged wiring, or reprogramming the engine control module.
7. Is it possible to reset the U11E2 code without fixing the underlying issue?
While you can clear the U11E2 code with an OBDII scanner, it is important to address the underlying issue to prevent further problems.
8. Can weather changes affect the U11E2 code in a Chrysler vehicle?
Weather changes can impact barometric pressure readings and potentially trigger the U11E2 code, but the code usually indicates a failure in the sensor or related components.
9. Are there any preventative maintenance tips to avoid the U11E2 code in a Chrysler vehicle?
Regularly checking and maintaining the barometric pressure sensor, as well as keeping the engine control module in good condition, can help prevent the U11E2 code from appearing.
10. Could a disconnected or damaged vacuum line cause the U11E2 code in a Chrysler vehicle?
Yes, a disconnected or damaged vacuum line can affect barometric pressure readings and lead to the triggering of the U11E2 code.
Discuss the causes and fixes for U11E2 Chrysler OBDII Code
Code U11E2 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.