U111E 2019 GMC Sierra Code - Lost Communication with EVAP Purge Pump
Quick Answer
The U111E code for a 2019 GMC Sierra indicates that there is a communication error between the vehicle's Engine Control Module (ECM) and the Evaporative Emission (EVAP) Purge Pump. Common causes include Loose or corroded electrical connections, Damaged wiring harness, Faulty EVAP Purge Pump. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U111E 2019 GMC Sierra indicates Lost Communication with EVAP Purge Pump.
- Common causes
- Common causes include Loose or corroded electrical connections, Damaged wiring harness, Faulty EVAP Purge Pump.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U111E 2019 GMC Sierra Description
The U111E code for a 2019 GMC Sierra indicates that there is a communication error between the vehicle's Engine Control Module (ECM) and the Evaporative Emission (EVAP) Purge Pump. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The purge pump is a crucial component of this system, as it helps to control the flow of fuel vapors and directs them into the engine for combustion.
Common Causes of U111E 2019 GMC Sierra
- Loose or corroded electrical connections
- Damaged wiring harness
- Faulty EVAP Purge Pump
- Malfunctioning Engine Control Module (ECM)
- Environmental factors such as moisture or debris affecting the components
Symptoms of U111E 2019 GMC Sierra
- Check engine light illuminated on the dashboard
- Reduced fuel efficiency
- Rough idling or stalling
- Difficulty starting the vehicle
How to Fix U111E 2019 GMC Sierra
- Begin by inspecting the wiring and connectors associated with the EVAP Purge Pump to check for any visible damage or corrosion. Replace any damaged components as needed.
- Use a multimeter to test the continuity of the wiring harness and ensure that there are no breaks or shorts in the circuit.
- Test the EVAP Purge Pump itself by applying power directly to the pump and checking for proper operation. Replace the pump if it is found to be faulty.
- If all electrical components are functioning correctly, perform a diagnostic scan to reset the ECM and clear the error code. Monitor the system for any recurring issues.
- If the problem persists, consult a professional mechanic or dealership for further troubleshooting and potential ECM replacement.
Cost to Fix U111E 2019 GMC Sierra
The cost of repairing a lost communication issue with the EVAP Purge Pump can vary depending on the specific cause of the problem and the labor rates in your area. On average, you can expect to pay between $150 and $500 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to get a detailed estimate from a trusted mechanic before proceeding with the repairs.
Need more information about the U111E 2019 GMC Sierra code?
Need more information on how to fix the U111E 2019 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U111E 2019 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U111E 2019 GMC Sierra Code
What does the OBDII code U111E mean on a 2019 GMC Sierra?
The U111E code indicates "Lost Communication with EVAP Purge Pump," meaning the vehicle's control module cannot communicate with the EVAP purge pump module.
What are the symptoms of the U111E code on a 2019 GMC Sierra?
Common symptoms include a check engine light, possible EVAP system-related codes, reduced fuel efficiency, or difficulty passing an emissions test.
What causes the U111E code on a 2019 GMC Sierra?
The most common causes include a faulty EVAP purge pump, damaged wiring, poor electrical connections, or a malfunctioning control module.
Can I drive my 2019 GMC Sierra with the U111E code?
While the truck may still be drivable, it is best to diagnose and repair the issue promptly, as it could impact emissions performance and fuel efficiency.
How do I diagnose the U111E code on my 2019 GMC Sierra?
Start by checking the EVAP purge pump wiring and connectors for damage or corrosion. Use a scan tool to verify communication with the EVAP purge pump module.
What tools are needed to troubleshoot the U111E code?
A diagnostic scan tool, a multimeter, and a wiring diagram for the EVAP system are typically required for troubleshooting.
How much does it cost to repair the U111E code on a 2019 GMC Sierra?
Repairs can range from $100 to $500 or more, depending on whether the issue is a simple wiring fix or requires replacing the EVAP purge pump.
Can a U111E code be caused by a dead battery?
Yes, a low or dead battery can cause communication issues, including the U111E code, so ensure the battery is fully charged.
What is the EVAP purge pump, and why is it important?
The EVAP purge pump helps control fuel vapors in the evaporative emissions system, reducing harmful emissions and ensuring proper fuel efficiency.
How do I clear the U111E code after repairs?
Use an OBDII scan tool to clear the code, but only after confirming that the underlying issue has been resolved.
Discuss the causes and fixes for U111E 2019 GMC Sierra OBDII Code
Code U111E 2019 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.