U029E 2017 GMC Sierra Code - Lost Communication with NOX Sensor Module 2 Malfunction
Quick Answer
The U029E diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is a communication problem with the NOX (Nitrogen Oxide) sensor module 2. Common causes include Wiring harness damage or corrosion, Faulty connector or poor connection, NOX sensor module malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U029E 2017 GMC Sierra indicates Lost Communication with NOX Sensor Module 2 Malfunction.
- Common causes
- Common causes include Wiring harness damage or corrosion, Faulty connector or poor connection, NOX sensor module malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U029E 2017 GMC Sierra Description
The U029E diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is a communication problem with the NOX (Nitrogen Oxide) sensor module 2. This module is responsible for monitoring and regulating the levels of nitrogen oxide emissions in the vehicle's exhaust system. When the communication with the NOX sensor module 2 is lost, it can lead to a malfunction in the sensor's operation, potentially causing the vehicle to run inefficiently and emit higher levels of harmful emissions.
Common Causes of U029E 2017 GMC Sierra
- Wiring harness damage or corrosion
- Faulty connector or poor connection
- NOX sensor module malfunction
- Software glitches or PCM issues
- Electrical interference or grounding problems
Symptoms of U029E 2017 GMC Sierra
- Check engine light illuminated
- Decreased fuel efficiency
- Rough idling
- Hesitation during acceleration
- Emission test failure
How to Fix U029E 2017 GMC Sierra
- Perform a thorough diagnostic scan to confirm the U029E code and identify the specific cause of the communication failure.
- Inspect the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test the NOX sensor module 2 for proper operation and replace if found to be faulty.
- Check for software updates for the PCM and perform reprogramming if necessary to resolve communication issues.
- Clear the DTC and reset the vehicle's computer system to ensure the repair was successful.
Cost to Fix U029E 2017 GMC Sierra
The typical repair costs for addressing a U029E code on a 2017 GMC Sierra can range from $200 to $600, including parts and labor. However, it is essential to note that the specific diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It is advisable to obtain local estimates for a more accurate cost assessment.
Need more information about the U029E 2017 GMC Sierra code?
Need more information on how to fix the U029E 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U029E 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U029E 2017 GMC Sierra Code
1. What does OBDII code U029E mean on a 2017 GMC Sierra?
Code U029E indicates a loss of communication between the vehicle’s main computer and the NOx Sensor Module 2, which monitors nitrogen oxide emissions.
2. What are the symptoms of code U029E on a 2017 GMC Sierra?
Common symptoms include the check engine light turning on, decreased fuel efficiency, possible reduced engine power, and failure to pass emissions tests.
3. What causes the U029E code on a GMC Sierra?
Potential causes include a faulty NOx Sensor Module 2, damaged wiring or connectors in the communication circuit, or an issue with the vehicle's ECU.
4. Can I drive my 2017 GMC Sierra with a U029E code?
While the vehicle may still be drivable, it could experience reduced performance and higher emissions. Addressing the issue promptly is recommended to avoid further damage.
5. How do I diagnose the U029E code on my GMC Sierra?
Check for damaged wiring or loose connections around the NOx sensor module, test the sensor for proper function, and verify the integrity of the communication circuit with a diagnostic tool.
6. How do I fix the U029E code on a 2017 GMC Sierra?
Repairs may include replacing a faulty NOx Sensor Module 2, repairing damaged wiring, cleaning corroded connectors, or updating/reprogramming the ECU if needed.
7. How much does it cost to fix the U029E code on a GMC Sierra?
Costs vary depending on the repair. Replacing the NOx sensor can cost $400–$900, while wiring repairs or diagnostics may cost less.
8. Can a software update fix the U029E code on my GMC Sierra?
In some cases, an ECU software update or reprogramming may resolve communication issues between the ECU and the NOx sensor module.
9. What tools are needed to troubleshoot the U029E code?
You’ll need an OBDII scanner with advanced diagnostic capabilities, a multimeter for testing wiring, and a service manual for wiring diagrams.
10. Is U029E a common issue on the 2017 GMC Sierra?
While not extremely common, communication errors like U029E can occur, especially in vehicles with high mileage or exposure to harsh environmental conditions.
Discuss the causes and fixes for U029E 2017 GMC Sierra OBDII Code
Code U029E 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.