U029E 2016 GMC Sierra Code - Lost Communication with NOX Sensor Module 2 Malfunction
Quick Answer
The U029E diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates that there is a communication problem with the NOx (nitrogen oxide) sensor module 2. Common causes include Faulty wiring or connectors leading to the NOx sensor module, Malfunctioning NOx sensor module, Communication error between the sensor module and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U029E 2016 GMC Sierra indicates Lost Communication with NOX Sensor Module 2 Malfunction.
- Common causes
- Common causes include Faulty wiring or connectors leading to the NOx sensor module, Malfunctioning NOx sensor module, Communication error between the sensor module and ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U029E 2016 GMC Sierra Description
The U029E diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates that there is a communication problem with the NOx (nitrogen oxide) sensor module 2. This module is responsible for monitoring the levels of nitrogen oxide in the exhaust gases and providing feedback to the engine control module (ECM) to optimize fuel efficiency and reduce emissions. When communication is lost with this sensor module, it can lead to a variety of issues with the vehicle's performance.
Common Causes of U029E 2016 GMC Sierra
- Faulty wiring or connectors leading to the NOx sensor module
- Malfunctioning NOx sensor module
- Communication error between the sensor module and ECM
- Corrosion or damage to sensor module connections
- Software issues with the ECM
Symptoms of U029E 2016 GMC Sierra
- Check engine light illuminated on the dashboard
- Reduced fuel efficiency
- Increased emissions output
- Engine running rough or misfiring
- Vehicle may go into limp mode
How to Fix U029E 2016 GMC Sierra
- Begin by conducting a visual inspection of the wiring and connectors leading to the NOx sensor module to check for any damage or corrosion.
- Test the NOx sensor module using a multimeter to determine if it is functioning properly.
- Check for any communication errors between the sensor module and the ECM using a diagnostic scan tool.
- If necessary, replace the NOx sensor module and ensure all connections are secure.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix U029E 2016 GMC Sierra
The typical repair costs for addressing a U029E code on a 2016 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing a NOx sensor module can cost between $200 and $500, including parts and labor. Additional costs may be incurred if there are wiring or connector issues that need to be addressed. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check local rates for a more precise estimate.
Need more information about the U029E 2016 GMC Sierra code?
Need more information on how to fix the U029E 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U029E 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U029E 2016 GMC Sierra Code
What does the OBDII code U029E mean on a 2016 GMC Sierra?
It means there is a loss of communication between the vehicle's computer and the NOx Sensor Module 2, which monitors nitrogen oxide emissions.
What are the common symptoms of the U029E code?
Symptoms may include an illuminated check engine light, reduced engine performance, increased emissions, or issues with fuel efficiency.
What causes the U029E code to appear?
Common causes include a faulty NOx sensor, damaged wiring or connectors, a failed NOx sensor module, or communication issues in the CAN bus network.
Can I drive my GMC Sierra with the U029E code?
Driving is possible but not recommended, as it can lead to increased emissions, potential engine damage, and failure to meet emissions standards.
How can I diagnose the U029E code?
Start by checking the wiring and connectors for damage or corrosion, inspecting the NOx sensor, and using a scan tool to verify communication with the NOx Sensor Module 2.
Is the problem likely to be with the sensor or the vehicle's computer?
While the sensor is often the culprit, the issue can also stem from wiring, connectors, or the vehicle's CAN bus system.
How do I fix the U029E code on a 2016 GMC Sierra?
Repairs may include replacing the faulty NOx sensor, repairing damaged wiring or connectors, or addressing issues in the CAN bus network.
What tools are needed to troubleshoot the U029E code?
You’ll need an OBDII scan tool with CAN bus communication capabilities, a multimeter for testing wiring, and possibly a diagnostic flowchart for your vehicle.
How much does it cost to repair a U029E code?
Costs vary but typically range from $200 to $600, depending on whether you need to replace the NOx sensor or repair wiring and connectors.
Will clearing the code fix the problem?
Clearing the code will only reset the warning temporarily. The underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for U029E 2016 GMC Sierra OBDII Code
Code U029E 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.