U016C Mercury Code - Lost Communication With Fuel Pump Control Module 'B'
Quick Answer
The U016C diagnostic trouble code (DTC) for Mercury vehicles indicates that there is a communication issue with the fuel pump control module 'B'. Common causes include Corroded or damaged wiring connections, Faulty fuel pump control module, Poor electrical connections or grounds. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U016C Mercury indicates Lost Communication With Fuel Pump Control Module 'B'.
- Common causes
- Common causes include Corroded or damaged wiring connections, Faulty fuel pump control module, Poor electrical connections or grounds.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U016C Mercury Description
The U016C diagnostic trouble code (DTC) for Mercury vehicles indicates that there is a communication issue with the fuel pump control module 'B'. In modern vehicles, various modules and sensors communicate with each other through a network known as the Controller Area Network (CAN). The fuel pump control module is responsible for regulating the fuel pump's operation, ensuring the right amount of fuel is delivered to the engine at all times. When communication is lost with this module, it can lead to a range of issues affecting the vehicle's performance.
Common Causes of U016C Mercury
- Corroded or damaged wiring connections.
- Faulty fuel pump control module.
- Poor electrical connections or grounds.
- CAN communication bus faults.
- Software glitches or programming errors.
Symptoms of U016C Mercury
- Engine stalling or hesitation during acceleration.
- Difficulty starting the engine.
- Rough idling or irregular engine performance.
- Illumination of the check engine light on the dashboard.
- Loss of power while driving.
How to Fix U016C Mercury
- Perform a thorough visual inspection of the wiring harness and connectors related to the fuel pump control module.
- Use a diagnostic scan tool to retrieve DTCs and identify the specific communication fault.
- Test the fuel pump control module for proper operation and communication signals.
- Repair or replace any damaged wiring, connectors, or components as necessary.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix U016C Mercury
The repair costs for addressing a U016C code on a Mercury vehicle can vary depending on the specific cause of the communication failure. In general, replacing a faulty fuel pump control module or repairing wiring issues can range from $200 to $500, including parts and labor. Additional diagnostic fees and programming may also apply, so it's advisable to consult with a trusted auto repair shop for an accurate cost estimate tailored to your vehicle's needs. Keep in mind that labor rates and part prices can vary based on location and the service provider you choose.
Need more information about the U016C Mercury code?
Need more information on how to fix the U016C Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U016C Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U016C Mercury Code
1. What does the OBD-II code U016C mean for a Mercury vehicle?
The U016C code indicates a loss of communication between the Fuel Pump Control Module 'B' and other modules in the vehicle's network.
2. What are the common symptoms of the U016C code in a Mercury?
Symptoms include difficulty starting the vehicle, engine stalling, reduced fuel efficiency, or the inability to start at all.
3. What causes the U016C code to appear in a Mercury?
This code can be caused by wiring issues, such as damaged or loose electrical connections, a failed Fuel Pump Control Module 'B,' or network communication errors.
4. Can a weak battery trigger the U016C code in a Mercury?
Yes, a weak or failing battery can disrupt communication between modules and trigger this code.
5. How do you diagnose the U016C code on a Mercury vehicle?
Diagnosis typically involves inspecting the wiring and connectors, testing the Fuel Pump Control Module, and checking for proper voltage and ground signals.
6. Can driving with the U016C code damage my Mercury?
While it may not immediately cause damage, unresolved issues with the fuel pump control system can lead to engine performance problems and potential safety concerns.
7. What is the most common fix for the U016C code on a Mercury?
The most common fix is repairing or replacing damaged wiring or connectors leading to the Fuel Pump Control Module.
8. Do I need to replace the Fuel Pump Control Module 'B' for the U016C code?
Replacement is necessary only if the module has been confirmed as faulty after thorough testing.
9. Can a software update fix the U016C code in a Mercury?
In some cases, a software update or reprogramming of the affected modules may resolve communication issues.
10. Is the U016C code specific to Mercury vehicles?
No, the U016C code can appear on various makes and models, but its interpretation and repair may vary depending on the vehicle's design.
Discuss the causes and fixes for U016C Mercury OBDII Code
Code U016C Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.