U010E 2018 GMC Sierra Code - Lost Communication With Reductant Sensor Module
Quick Answer
The U010E diagnostic trouble code for a 2018 GMC Sierra indicates that there is a communication issue with the Reductant Sensor Module. Common causes include Faulty Reductant Sensor Module, Wiring issues or corrosion, Poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U010E 2018 GMC Sierra indicates Lost Communication With Reductant Sensor Module.
- Common causes
- Common causes include Faulty Reductant Sensor Module, Wiring issues or corrosion, Poor electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U010E 2018 GMC Sierra Description
The U010E diagnostic trouble code for a 2018 GMC Sierra indicates that there is a communication issue with the Reductant Sensor Module. The Reductant Sensor Module is responsible for monitoring and controlling the levels of emissions produced by the vehicle, specifically related to the Selective Catalytic Reduction (SCR) system. When communication is lost with this module, it can lead to reduced fuel efficiency, increased emissions, and potentially cause the vehicle to go into a reduced power mode to protect the engine.
Common Causes of U010E 2018 GMC Sierra
- Faulty Reductant Sensor Module
- Wiring issues or corrosion
- Poor electrical connections
- Software glitches or malfunctions
- Damage to the SCR system
Symptoms of U010E 2018 GMC Sierra
- Check Engine Light illuminated
- Reduced fuel efficiency
- Rough idling or stalling
- Vehicle going into reduced power mode
- Increased emissions output
How to Fix U010E 2018 GMC Sierra
- Perform a diagnostic scan to confirm the U010E code and identify the specific issue.
- Inspect the wiring and connections related to the Reductant Sensor Module for any damage or corrosion.
- Test the Reductant Sensor Module to determine if it is faulty and needs to be replaced.
- Repair or replace any damaged wiring or connections.
- Clear the code, reset the system, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix U010E 2018 GMC Sierra
The typical repair costs for addressing a U010E code on a 2018 GMC Sierra can vary depending on the specific issue and labor rates. In general, the cost of parts for a Reductant Sensor Module replacement can range from $200 to $500, while the labor cost can range from $100 to $300. Overall, the total repair cost could be between $300 and $800. It's important to note that actual costs may differ based on location, vehicle make and model, and the specific repair shop chosen.
Need more information about the U010E 2018 GMC Sierra code?
Need more information on how to fix the U010E 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U010E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U010E 2018 GMC Sierra Code
What does the OBDII code U010E mean on a 2018 GMC Sierra?
The U010E code means there is a loss of communication between the vehicle's primary control modules and the Reductant Sensor Module, which monitors the diesel exhaust fluid (DEF) system.
What are the common symptoms of the U010E code?
Symptoms include the check engine light turning on, DEF system warnings, reduced engine power, or the vehicle entering a limp mode.
What causes the U010E code to appear?
Common causes include faulty wiring or connectors, a malfunctioning Reductant Sensor Module, a blown fuse, or issues with the vehicle’s CAN (Controller Area Network) communication system.
Can a bad Reductant Sensor Module trigger the U010E code?
Yes, a faulty or damaged Reductant Sensor Module can cause a loss of communication and trigger the U010E code.
How do I diagnose the U010E code on my GMC Sierra?
Start by checking the wiring and connectors for damage or corrosion, inspecting the Reductant Sensor Module, and testing the CAN bus communication with a scan tool.
Can I drive my 2018 GMC Sierra with the U010E code active?
Driving with this code is not recommended as it may lead to reduced engine performance, limp mode, or emissions-related issues that could damage the engine over time.
How do I fix the U010E code?
Repairs may involve replacing damaged wiring, reconnecting loose connectors, replacing the Reductant Sensor Module, or reprogramming the module using a scan tool.
Is the U010E code covered under warranty for a 2018 GMC Sierra?
Coverage depends on your vehicle's warranty terms and whether the issue is related to emissions components or powertrain defects. Check with your dealership for details.
What tools are needed to fix the U010E code?
You’ll need an OBDII scan tool to read and clear the code, a multimeter to test wiring, and possibly specialized tools for module reprogramming or replacement.
Can a software update resolve the U010E code?
In some cases, a software update for the vehicle’s control modules can resolve communication issues and clear the U010E code. Check with your dealership to see if a software update is available.
Discuss the causes and fixes for U010E 2018 GMC Sierra OBDII Code
Code U010E 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.