U010C 2017 GMC Sierra Code - Lost Communication with Turbocharger Boost Control Module
Quick Answer
The U010C diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is a communication problem between the Engine Control Module (ECM) and the Turbocharger Boost Control Module. Common causes include Faulty wiring or connectors, Defective Turbocharger Boost Control Module, Malfunctioning Engine Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U010C 2017 GMC Sierra indicates Lost Communication with Turbocharger Boost Control Module.
- Common causes
- Common causes include Faulty wiring or connectors, Defective Turbocharger Boost Control Module, Malfunctioning Engine Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U010C 2017 GMC Sierra Description
The U010C diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is a communication problem between the Engine Control Module (ECM) and the Turbocharger Boost Control Module. The turbocharger boost control module is responsible for regulating the amount of boost pressure in the turbocharger system, which in turn affects the engine's performance and efficiency. When communication is lost between these two modules, it can lead to a variety of issues that can impact the vehicle's overall performance.
Common Causes of U010C 2017 GMC Sierra
- Faulty wiring or connectors
- Defective Turbocharger Boost Control Module
- Malfunctioning Engine Control Module
- Software issues
- Water or corrosion damage to electrical components
Symptoms of U010C 2017 GMC Sierra
- Loss of engine power
- Decreased fuel efficiency
- Hesitation or surging during acceleration
- Check Engine Light illuminated
- Rough idling or stalling
How to Fix U010C 2017 GMC Sierra
- Begin by conducting a thorough inspection of the wiring and connectors between the Engine Control Module and Turbocharger Boost Control Module.
- Test the Turbocharger Boost Control Module to determine if it is functioning correctly or needs replacement.
- Check the Engine Control Module for any faults or errors that may be causing the communication issue.
- Address any software-related issues by updating the ECM or TBCM software as needed.
- Clear the DTC and perform a test drive to ensure the communication between the modules has been restored.
Cost to Fix U010C 2017 GMC Sierra
The typical repair costs for resolving a U010C code can range from $200 to $800, depending on the specific cause of the communication issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check local rates for a more accurate estimate. Additionally, factors such as the vehicle make and model, engine type, and location can also influence the final repair costs.
Need more information about the U010C 2017 GMC Sierra code?
Need more information on how to fix the U010C 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U010C 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U010C 2017 GMC Sierra Code
1. What does the OBDII code U010C mean on a 2017 GMC Sierra?
U010C indicates that the vehicle's Engine Control Module (ECM) has lost communication with the Turbocharger Boost Control Module.
2. What are the common symptoms of code U010C in a 2017 GMC Sierra?
Symptoms may include reduced engine performance, lack of turbo boost, poor fuel economy, and an illuminated check engine light.
3. What causes the U010C code to appear in a 2017 GMC Sierra?
Common causes include a faulty Turbocharger Boost Control Module, damaged wiring or connectors, or issues with the CAN (Controller Area Network) bus system.
4. How can I diagnose the U010C code on my 2017 GMC Sierra?
Start by checking the wiring and connectors between the ECM and the Turbocharger Boost Control Module for damage or corrosion. Use a scan tool to check for additional communication-related codes.
5. Can a bad turbocharger cause the U010C code?
No, the U010C code is specifically about a communication failure between the ECM and the Turbocharger Boost Control Module, not the turbocharger itself.
6. Is it safe to drive with the U010C code on my 2017 GMC Sierra?
Driving with this code can cause reduced performance and may lead to further damage if left unaddressed. It's best to diagnose and fix the issue promptly.
7. How do I fix the U010C code on a 2017 GMC Sierra?
Repairs may include replacing faulty wiring, repairing or replacing damaged connectors, or replacing the Turbocharger Boost Control Module if it’s defective.
8. Can a software update fix the U010C code on a 2017 GMC Sierra?
In some cases, a software update for the ECM or Turbocharger Boost Control Module may resolve communication issues. Consult a dealer or qualified technician.
9. Will clearing the U010C code with a scan tool fix the issue?
Clearing the code will turn off the check engine light temporarily, but if the underlying problem isn’t resolved, the code will return.
10. How much does it cost to fix the U010C code on a 2017 GMC Sierra?
Cost depends on the root cause. Wiring or connector repairs may cost $100 to $300, while replacing the Turbocharger Boost Control Module may cost $500 to $1,000 or more, including labor.
Discuss the causes and fixes for U010C 2017 GMC Sierra OBDII Code
Code U010C 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.