U0105 GMC Code - Lost Communication With Fuel Injector Control Module
Quick Answer
The U0105 GMC code indicates that there is a loss of communication with the Fuel Injector Control Module (FICM). Common causes include Wiring issues, Faulty FICM, Blown fuse. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U0105 GMC indicates Lost Communication With Fuel Injector Control Module.
- Common causes
- Common causes include Wiring issues, Faulty FICM, Blown fuse.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U0105 GMC Description
The U0105 GMC code indicates that there is a loss of communication with the Fuel Injector Control Module (FICM). The FICM is responsible for controlling the fuel injectors in the engine, ensuring that the right amount of fuel is delivered at the correct time for combustion. When communication with the FICM is lost, it can lead to a variety of issues that can affect the vehicle's performance and efficiency.
Common Causes of U0105 GMC
- Wiring issues
- Faulty FICM
- Blown fuse
- Malfunctioning ECM
- Corrosion or damage to connectors
Symptoms of U0105 GMC
- Poor engine performance
- Reduced fuel efficiency
- Difficulty starting
- Rough idling
- Stalling or misfiring
How to Fix U0105 GMC
- Perform a diagnostic scan to confirm the code and identify the specific issue.
- Inspect the wiring harness and connectors for any damage or corrosion.
- Test the FICM and ECM for proper functionality and replace if necessary.
- Check and replace any blown fuses related to the fuel injector system.
- Clear the code and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix U0105 GMC
The cost of repairing a U0105 GMC code can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $200 to $600, with labor costs adding an additional $100 to $300. This estimate does not include diagnostic fees, which can range from $50 to $150. Keep in mind that labor rates can vary based on location and the shop's hourly rate, so it's best to consult with a professional for a more accurate estimate.
Need more information about the U0105 GMC code?
Need more information on how to fix the U0105 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U0105 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U0105 GMC Code
What does the OBDII code U0105 indicate?
U0105 indicates a communication problem between the Engine Control Module (ECM) and the Fuel Injector Control Module (FICM), leading to a loss of data exchange.
What are the common symptoms of a U0105 code?
Common symptoms include poor engine performance, stalling, trouble starting, and the check engine light being illuminated.
What could cause the U0105 code to trigger?
Potential causes include wiring issues, a faulty Fuel Injector Control Module, a malfunctioning Engine Control Module, or problems with the vehicle’s connectors.
How can I diagnose a U0105 code?
To diagnose U0105, check for any wiring or connector damage, use a scan tool to verify the code and any related codes, and test the FICM and ECM for proper function.
What are some common repair tips for a U0105 code?
Common repairs may involve repairing or replacing damaged wiring and connectors, reprogramming or replacing the FICM, or checking for updates on the ECM software.
Can I drive my vehicle with a U0105 code?
Driving with a U0105 code is not recommended, as it can lead to poor performance and potential engine damage due to improper fuel injection control.
How do I clear the U0105 code after repairs?
After repairs, you can clear the U0105 code using an OBDII scanner, or by disconnecting the vehicle’s battery for a few minutes, although the scanner method is preferred for accuracy.
Is U0105 specific to certain GMC models?
While U0105 can occur in various vehicles, it is particularly noted in some GMC models, especially those with specific fuel injection systems.
What should I check first if I get a U0105 code?
Start by inspecting the wiring and connectors between the ECM and FICM for any visible damage or corrosion, as these are common culprits of communication issues.
Discuss the causes and fixes for U0105 GMC OBDII Code
Code U0105 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.