U007F 2016 GMC Sierra Code - Control Module Communication FlexRay 1B Bus Off
Quick Answer
The U007F code for a 2016 GMC Sierra indicates an issue with the Control Module Communication FlexRay 1B Bus being off. Common causes include Faulty control module on the FlexRay 1B bus, Wiring harness issues, such as loose connections or damaged wires, Software glitches in the control modules. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U007F 2016 GMC Sierra indicates Control Module Communication FlexRay 1B Bus Off.
- Common causes
- Common causes include Faulty control module on the FlexRay 1B bus, Wiring harness issues, such as loose connections or damaged wires, Software glitches in the control modules.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U007F 2016 GMC Sierra Description
The U007F code for a 2016 GMC Sierra indicates an issue with the Control Module Communication FlexRay 1B Bus being off. The FlexRay communication system is a high-speed data bus used in modern vehicles to facilitate communication between various control modules. When this code is triggered, it means that the communication on the FlexRay 1B bus has been interrupted or lost, leading to potential issues with the vehicle's systems.
Common Causes of U007F 2016 GMC Sierra
- Faulty control module on the FlexRay 1B bus.
- Wiring harness issues, such as loose connections or damaged wires.
- Software glitches in the control modules.
- Water damage or corrosion in the communication network.
- Electrical interference from aftermarket accessories or modifications.
Symptoms of U007F 2016 GMC Sierra
- Check engine light illuminated on the dashboard.
- Loss of communication with certain control modules.
- Erratic behavior in vehicle systems, such as transmission shifting issues.
- Loss of power steering assistance.
- Inability to start the vehicle.
How to Fix U007F 2016 GMC Sierra
- Perform a thorough diagnostic scan to retrieve the U007F code and identify the specific control module or wiring issue.
- Inspect the wiring harness for any visible damage, corrosion, or loose connections. Repair or replace as needed.
- Check the control modules on the FlexRay 1B bus for faults or software issues. Update or replace as necessary.
- Clear the code from the vehicle's memory and test drive to ensure the issue has been resolved.
- If the problem persists, consult with a professional technician for further troubleshooting and repair.
Cost to Fix U007F 2016 GMC Sierra
The typical repair costs for addressing a U007F code on a 2016 GMC Sierra can vary depending on the specific cause of the issue. In general, you can expect to pay anywhere from $200 to $500 for parts and labor. However, it's important to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check with local shops for a more accurate estimate based on your specific situation. Keep in mind that rates at dealerships or in metropolitan areas may be higher, while independent shops often offer more competitive pricing.
Need more information about the U007F 2016 GMC Sierra code?
Need more information on how to fix the U007F 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U007F 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U007F 2016 GMC Sierra Code
What does the OBDII code U007F mean on a 2016 GMC Sierra?
The code U007F indicates a communication failure on the FlexRay 1B bus, which is used for high-speed data transfer between control modules in the vehicle.
What are the symptoms of U007F on a 2016 GMC Sierra?
Symptoms may include warning lights on the dashboard (e.g., check engine or service stability), erratic vehicle operation, or loss of communication with certain control modules.
What causes the U007F code to appear?
Common causes include damaged or corroded FlexRay wiring, a faulty control module, poor electrical connections, or a failed FlexRay communication chip.
Can I drive my 2016 GMC Sierra with the U007F code?
It is not recommended to drive the vehicle until the issue is resolved, as it can affect critical systems like stability control and powertrain communication.
How do you diagnose the U007F code on a GMC Sierra?
Diagnosis typically involves scanning for related codes, inspecting FlexRay wiring and connectors, testing the continuity of the bus, and checking for control module faults.
Is the U007F code specific to the GMC Sierra?
No, U007F is a generic code that can occur on various vehicles equipped with FlexRay communication systems, but the troubleshooting steps may vary by manufacturer.
What tools are needed to fix the U007F code?
A professional-grade scan tool capable of reading FlexRay communication, a multimeter for electrical testing, and possibly an oscilloscope to analyze signal integrity may be required.
How much does it cost to repair a U007F code?
Repair costs can vary widely depending on the root cause, ranging from $100 for minor wiring repairs to over $1,000 if a control module needs replacement.
Can a software update fix the U007F code?
In some cases, a software update from the manufacturer can resolve communication issues, but this depends on the specific nature of the problem.
What happens if the U007F code is ignored?
Ignoring this code can lead to further communication failures, reduced functionality of critical systems, and potential safety risks while driving.
Discuss the causes and fixes for U007F 2016 GMC Sierra OBDII Code
Code U007F 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.