U0074 2015 Chevrolet Silverado Code - Control Module Communication Powertrain Expansion CAN Bus Off Malfunction
Quick Answer
The U0074 code for a 2015 Chevrolet Silverado indicates a Control Module Communication Powertrain Expansion CAN Bus Off Malfunction. Common causes include Wiring Issues: Damaged or corroded wiring connections can disrupt communication signals between control modules, Faulty Control Module: A malfunctioning control module within the powertrain system can also trigger this code, Software Glitches: Errors in the vehicle's software programming can lead to communication failures between modules. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U0074 2015 Chevrolet Silverado indicates Control Module Communication Powertrain Expansion CAN Bus Off Malfunction.
- Common causes
- Common causes include Wiring Issues: Damaged or corroded wiring connections can disrupt communication signals between control modules, Faulty Control Module: A malfunctioning control module within the powertrain system can also trigger this code, Software Glitches: Errors in the vehicle's software programming can lead to communication failures between modules.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U0074 2015 Chevrolet Silverado Description
The U0074 code for a 2015 Chevrolet Silverado indicates a Control Module Communication Powertrain Expansion CAN Bus Off Malfunction. This means that there is a communication issue between the various control modules in the vehicle's powertrain system. The Controller Area Network (CAN) bus is a network that allows different modules in a vehicle to communicate with each other. When this communication is disrupted, it can lead to a range of performance issues and potentially affect the overall functionality of the vehicle.
Common Causes of U0074 2015 Chevrolet Silverado
- Wiring Issues: Damaged or corroded wiring connections can disrupt communication signals between control modules.
- Faulty Control Module: A malfunctioning control module within the powertrain system can also trigger this code.
- Software Glitches: Errors in the vehicle's software programming can lead to communication failures between modules.
- CAN Bus Malfunction: A malfunctioning CAN bus itself can cause communication issues between different components of the powertrain system.
Symptoms of U0074 2015 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Reduced Power: The vehicle may experience a decrease in power or acceleration due to the communication issues affecting the powertrain control module.
- Transmission Issues: Shifting problems or erratic behavior from the transmission can also occur as a result of the CAN bus malfunction.
- Stalling: In severe cases, the vehicle may stall or struggle to start, indicating a more significant communication breakdown within the powertrain system.
How to Fix U0074 2015 Chevrolet Silverado
- Diagnostic Scan: Begin by using a diagnostic scanner to retrieve the specific trouble codes and pinpoint the source of the communication malfunction.
- Check Wiring: Inspect all wiring connections and harnesses for damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Control Module Replacement: If a faulty control module is identified, it may need to be replaced and reprogrammed to restore proper communication within the powertrain system.
- Software Update: In some cases, updating the vehicle's software may resolve communication errors and restore functionality to the powertrain modules.
- CAN Bus Inspection: If the CAN bus is suspected to be malfunctioning, a thorough inspection and potential replacement may be necessary to ensure proper communication between modules.
Cost to Fix U0074 2015 Chevrolet Silverado
The cost estimate for resolving a U0074 code on a 2015 Chevrolet Silverado can vary depending on the specific cause of the issue and the repair steps required. In general, diagnostic fees typically range from $50 to $150, while labor costs for repairs can range from $80 to $150 per hour.
Tech Notes for U0074 2015 Chevrolet Silverado
- 2014-2018 Chevrolet Silverado
- 2015-2018 Chevrolet Suburban
- 2015-2018 Chevrolet Tahoe
If the Diagnostic Trouble Codes (DTC) P2635, U0074, and/or U18A2 are set, it may be found that the actual fuel pressure (low-pressure system) will be reading substantially higher than desired fuel pressure, in this case, the cause of the problem is a loss of communication between Engine Control Module (ECM) and Fuel Pump Control Module (FPCM).
- Diagnose for any communication DTCs set (U0074 would take priority over U18A2 if both set) before addressing DTC P2635.
- If DTC P2635 is not resolved by correcting the communication DTCs, only then should diagnose the DTC P2635.
- It has been found that a communication issue between the FPCM and ECM can potentially induce DTC P2635 and result in a pressure differential between actual and desired fuel system pressures.
- If the actual fuel pressure is substantially higher than desired (10 psi / 70 kPa or more), replacement of the fuel pump control module or fuel system components typically will not resolve this issue.
- If the actual fuel pressure is substantially lower than desired (10 psi / 70 kPa or more), this Factory Service Bulletin would NOT apply. It would be recommended to diagnose low actual fuel pressure.
Need more information about the U0074 2015 Chevrolet Silverado code?
Need more information on how to fix the U0074 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U0074 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U0074 2015 Chevrolet Silverado Code
1. What does the OBDII code U0074 mean on a 2015 Chevrolet Silverado?
The code U0074 indicates a "Control Module Communication Powertrain Expansion CAN Bus Off Malfunction," meaning there's an issue with communication between control modules via the CAN (Controller Area Network) bus.
2. What are the common symptoms of the U0074 code in a 2015 Silverado?
Symptoms may include the check engine light turning on, other warning lights illuminating, unresponsive vehicle systems, and potential issues with starting or driving performance.
3. What causes the U0074 code to appear in a 2015 Chevrolet Silverado?
Possible causes include a short or open circuit in the CAN bus wiring, a faulty control module, poor connections at wiring harnesses, or a low battery voltage.
4. Can a weak battery cause the U0074 code in a 2015 Silverado?
Yes, a weak or failing battery can cause communication issues on the CAN bus, potentially triggering the U0074 code.
5. How can I diagnose the U0074 code on my Silverado?
Start by checking the battery voltage, inspecting CAN bus wiring and connectors for damage or corrosion, and using a scan tool to monitor module communication and pinpoint the issue.
6. Is it safe to drive with the U0074 code on my 2015 Silverado?
It’s not recommended, as the code can indicate critical communication problems between modules, which might lead to unpredictable vehicle performance or safety system malfunctions.
7. How do I fix the U0074 code on my 2015 Chevrolet Silverado?
Fixes may include repairing or replacing damaged CAN bus wiring, ensuring proper connections at harnesses, reprogramming or replacing faulty control modules, or addressing low battery voltage.
8. Can a faulty ECU or module trigger the U0074 code in a Silverado?
Yes, a malfunctioning control module, such as the powertrain control module (PCM), can cause communication errors leading to the U0074 code.
9. What tools are needed to troubleshoot the U0074 code in a 2015 Silverado?
You’ll need a multimeter to check wiring, a scan tool capable of reading CAN bus data, and possibly an oscilloscope for advanced diagnostics.
10. Does clearing the U0074 code fix the issue in a 2015 Silverado?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for U0074 2015 Chevrolet Silverado OBDII Code
Code U0074 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.