P3487 Dodge Code - Cylinder 11 Exhaust Valve Control Circuit Low
Quick Answer
The P3487 diagnostic trouble code (DTC) for Dodge vehicles specifically refers to an issue with the Cylinder 11 Exhaust Valve Control Circuit being detected as operating at a low level. Common causes include Malfunctioning exhaust valve control solenoid, Damaged wiring or connectors in the control circuit, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3487 Dodge indicates Cylinder 11 Exhaust Valve Control Circuit Low.
- Common causes
- Common causes include Malfunctioning exhaust valve control solenoid, Damaged wiring or connectors in the control circuit, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3487 Dodge Description
The P3487 diagnostic trouble code (DTC) for Dodge vehicles specifically refers to an issue with the Cylinder 11 Exhaust Valve Control Circuit being detected as operating at a low level. This typically indicates a problem with the exhaust valve control system for the 11th cylinder in the engine.
Common Causes of P3487 Dodge
- Malfunctioning exhaust valve control solenoid
- Damaged wiring or connectors in the control circuit
- Faulty Engine Control Module (ECM)
- Mechanical issue with the exhaust valve itself
- Poor engine maintenance or neglect
Symptoms of P3487 Dodge
- Reduced engine power
- Decreased fuel efficiency
- Rough idling or engine misfires
- Illuminated Check Engine Light
- Potential emissions-related issues
How to Fix P3487 Dodge
- Perform a comprehensive diagnostic scan to confirm the P3487 code and identify the specific cause of the issue.
- Inspect the exhaust valve control solenoid, wiring, and connectors for any damage or corrosion. Repair or replace components as needed.
- Test the functionality of the exhaust valve control circuit using a digital multimeter to ensure proper voltage and continuity.
- If the ECM is suspected to be faulty, consider reprogramming or replacing it with a new unit.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P3487 Dodge
The typical repair costs for addressing a P3487 code can vary depending on the specific cause of the issue and the labor rates of the auto repair shop. On average, the repair costs for this problem can range from $200 to $500, including parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. Therefore, it's recommended to check with local shops for a more accurate estimate.
Need more information about the P3487 Dodge code?
Need more information on how to fix the P3487 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3487 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3487 Dodge Code
1. What does the OBDII code P3487 mean on a Dodge vehicle?
P3487 indicates an issue with the Cylinder 11 Exhaust Valve Control Circuit, specifically that the circuit is operating at a lower voltage than expected.
2. What are the common symptoms of the P3487 code?
Symptoms may include rough idling, decreased engine performance, poor fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P3487 code to appear?
Common causes include a faulty exhaust valve solenoid, damaged wiring or connectors, a malfunctioning PCM (Powertrain Control Module), or low oil pressure.
4. Can low oil pressure trigger the P3487 code?
Yes, low oil pressure can impact the operation of the exhaust valve control system, potentially triggering the P3487 code.
5. How do you diagnose the P3487 code on a Dodge?
Diagnosis typically involves scanning for codes, visually inspecting wiring and connectors, testing the exhaust valve solenoid, and checking for proper oil pressure.
6. Is it safe to drive with a P3487 code?
Driving with this code is not recommended as it can lead to reduced engine performance and potentially cause further damage if the issue is not resolved.
7. What repairs can fix the P3487 code?
Repairs may include replacing the exhaust valve solenoid, repairing or replacing damaged wiring or connectors, addressing low oil pressure, or reprogramming or replacing the PCM.
8. Can a dirty or clogged oil passage cause the P3487 code?
Yes, restricted oil flow to the exhaust valve control system can cause the circuit to function improperly and trigger the code.
9. How much does it cost to repair the P3487 code?
Repair costs can vary, but replacing the exhaust valve solenoid typically ranges from $100 to $300, while addressing wiring or PCM issues may cost more.
10. Does the P3487 code affect other cylinders in the engine?
This code specifically relates to Cylinder 11, but if left unresolved, it could lead to broader engine performance issues.
Discuss the causes and fixes for P3487 Dodge OBDII Code
Code P3487 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.