P3475 Dodge Code - Cylinder 10 Deactivation/Intake Valve Control Circuit Low
Quick Answer
The P3475 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the Cylinder 10 Deactivation/Intake Valve Control Circuit being detected as low. Common causes include Faulty intake valve control sensor, Wiring issues in the intake valve control circuit, Malfunctioning intake valve control solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3475 Dodge indicates Cylinder 10 Deactivation/Intake Valve Control Circuit Low.
- Common causes
- Common causes include Faulty intake valve control sensor, Wiring issues in the intake valve control circuit, Malfunctioning intake valve control solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3475 Dodge Description
The P3475 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the Cylinder 10 Deactivation/Intake Valve Control Circuit being detected as low. This code specifically relates to the operation of the cylinder deactivation system, which is designed to improve fuel efficiency by shutting down specific cylinders during light load conditions. In this case, Cylinder 10 is being flagged for having a low voltage signal in the intake valve control circuit.
Common Causes of P3475 Dodge
- Faulty intake valve control sensor
- Wiring issues in the intake valve control circuit
- Malfunctioning intake valve control solenoid
- Engine control module (ECM) malfunction
- Mechanical issue with the intake valves in Cylinder 10
Symptoms of P3475 Dodge
- Rough idling or engine vibration
- Reduced power output
- Decreased fuel efficiency
- Engine misfires
- Check Engine Light illuminated on the dashboard
How to Fix P3475 Dodge
- Begin by diagnosing the specific cause of the low voltage signal in the intake valve control circuit for Cylinder 10 using a diagnostic scanner.
- Inspect the intake valve control sensor and wiring for any damage or corrosion, replacing or repairing as necessary.
- Test the intake valve control solenoid to ensure it is functioning correctly, replacing it if faulty.
- Check the ECM for any faults or programming issues related to the cylinder deactivation system, reprogramming or replacing if needed.
- Verify the mechanical condition of the intake valves in Cylinder 10, addressing any issues with the valve operation.
Cost to Fix P3475 Dodge
The typical repair costs for addressing a P3475 code can vary depending on the specific cause of the issue and the required repairs. In general, the parts needed for this repair may cost anywhere from $100 to $300, while labor costs can range from $150 to $400. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on the make and model of the vehicle.
Need more information about the P3475 Dodge code?
Need more information on how to fix the P3475 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3475 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3475 Dodge Code
What does the OBDII code P3475 mean for a Dodge vehicle?
The P3475 code indicates an issue with the Cylinder 10 Deactivation/Intake Valve Control Circuit, specifically that the circuit voltage is lower than expected.
What are the common symptoms of the P3475 code?
Symptoms may include reduced engine performance, poor fuel economy, rough idling, and the check engine light being illuminated.
What causes the P3475 code to appear?
Common causes include a malfunctioning intake valve solenoid, damaged or corroded wiring or connectors, a faulty PCM (Powertrain Control Module), or low engine oil pressure.
Can I drive my Dodge with the P3475 code active?
Driving with this code is not recommended, as it can lead to reduced performance and potential engine damage if the deactivation system isn’t functioning properly.
How is the P3475 code diagnosed?
A mechanic will use an OBDII scanner to retrieve the code, inspect the wiring and connectors for damage, test the intake valve solenoid, and check for proper oil pressure.
What repairs are commonly needed to resolve the P3475 code?
Repairs may include replacing the intake valve solenoid, repairing damaged wiring or connectors, addressing oil pressure issues, or reprogramming or replacing the PCM if necessary.
Is low oil pressure a possible cause of the P3475 code?
Yes, low oil pressure can prevent the cylinder deactivation system from working properly, triggering this code.
How much does it typically cost to fix the P3475 code on a Dodge?
The repair cost will vary but may range from $150 to $500, depending on the specific issue, such as replacing a solenoid or fixing wiring.
Can a dirty engine oil filter cause the P3475 code?
Yes, a clogged oil filter can restrict oil flow and pressure, which may affect the cylinder deactivation system and trigger the code.
How can I prevent the P3475 code from occurring in the future?
Regular maintenance, such as timely oil changes and inspections of wiring and solenoids, can help prevent this code from recurring.
Discuss the causes and fixes for P3475 Dodge OBDII Code
Code P3475 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.