Engine-Codes.com
Engine-Codes – Dodge – P3474 Dodge

P3474 Dodge Code - Cylinder 10 Deactivation/Intake Valve Control Circuit Performance

Quick Answer

The P3474 diagnostic trouble code (DTC) for Dodge vehicles specifically refers to an issue in the Cylinder 10 Deactivation/Intake Valve Control Circuit. Common causes include Faulty cylinder deactivation/intake valve control solenoid, Wiring issues or poor electrical connections, Defective Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P3474 Dodge indicates Cylinder 10 Deactivation/Intake Valve Control Circuit Performance.
Common causes
Common causes include Faulty cylinder deactivation/intake valve control solenoid, Wiring issues or poor electrical connections, Defective Engine Control Module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P3474 Dodge Description

The P3474 diagnostic trouble code (DTC) for Dodge vehicles specifically refers to an issue in the Cylinder 10 Deactivation/Intake Valve Control Circuit. This code indicates that there is a performance problem in the system responsible for deactivating the intake valve in cylinder 10. In modern engines, cylinder deactivation technology is used to improve fuel efficiency by shutting down some cylinders when they are not needed, such as during light load conditions. This helps reduce fuel consumption and emissions.

OBDII Code P3474 Dodge - Cylinder 10 Deactivation/Intake Valve Control Circuit Performance
P3474 Dodge Code - Cylinder 10 Deactivation/Intake Valve Control Circuit Performance

Common Causes of P3474 Dodge

  1. Faulty cylinder deactivation/intake valve control solenoid
  2. Wiring issues or poor electrical connections
  3. Defective Engine Control Module (ECM)
  4. Mechanical problems in the intake valve system
  5. Sensor malfunction or failure

Symptoms of P3474 Dodge

  1. Rough idle or misfiring engine
  2. Decreased fuel efficiency
  3. Loss of power during acceleration
  4. Illumination of the Check Engine Light

How to Fix P3474 Dodge

  1. Begin by connecting a diagnostic scanner to the vehicle's OBD-II port to retrieve the specific trouble codes and confirm the presence of P3474.
  2. Inspect the wiring harness and connections related to the cylinder deactivation/intake valve control circuit for any damage or corrosion. Repair or replace as necessary.
  3. Test the cylinder deactivation/intake valve control solenoid to ensure it is functioning correctly. Replace if faulty.
  4. Check the Engine Control Module (ECM) for any faults or errors. Reset or replace the ECM if needed.
  5. Clear the trouble codes from the ECM's memory and test drive the vehicle to verify that the issue has been resolved.

Cost to Fix P3474 Dodge

The typical repair costs for addressing the P3474 code can vary depending on the exact cause of the issue. In general, parts such as a cylinder deactivation/intake valve control solenoid or an Engine Control Module (ECM) can range from $100 to $500 or more. Labor costs at auto repair shops can add another $100 to $300 or more, depending on the shop's hourly rates and the complexity of the repair. Diagnostic time may also incur additional charges. It is recommended to obtain quotes from local repair shops to get a more accurate estimate based on your specific vehicle make and model.

Need more information about the P3474 Dodge code?

Need more information on how to fix the P3474 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3474 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3474 Dodge Code

1. What are common symptoms of OBDII code P3474 in a Dodge related to Cylinder 10 Deactivation/Intake Valve Control Circuit Performance?

- Common symptoms include engine misfires, rough idling, reduced power, and the illumination of the Check Engine light.

2. What are the possible causes of OBDII code P3474 in a Dodge?

- Potential causes include a faulty intake valve control solenoid, wiring issues in the intake valve control circuit, a malfunctioning cylinder deactivation solenoid, or a problem with the engine control module.

3. How can I diagnose the OBDII code P3474 in my Dodge?

- Diagnosing this code typically involves using a scan tool to retrieve the specific trouble code, inspecting the intake valve control system components, and testing the electrical connections and wiring related to Cylinder 10.

4. Is it safe to continue driving my Dodge with OBDII code P3474 present?

- It is not recommended to continue driving your vehicle with this code active, as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.

5. How can I repair OBDII code P3474 in my Dodge?

- Repair options may include replacing the intake valve control solenoid, repairing or replacing damaged wiring, addressing any issues with the cylinder deactivation solenoid, or reprogramming the engine control module.

6. Can a DIY enthusiast fix OBDII code P3474 in a Dodge?

- Depending on your level of automotive expertise, some DIY enthusiasts may be able to address this code by following the manufacturer's service manual, utilizing proper tools, and being cautious around electrical components.

7. How much does it typically cost to repair OBDII code P3474 in a Dodge at a professional auto repair shop?

- The cost of repair can vary depending on the exact cause of the code and local labor rates. It is advisable to obtain quotes from several reputable repair shops to compare prices.

8. Will resetting the Check Engine light make OBDII code P3474 go away permanently?

- Resetting the Check Engine light without addressing the underlying issue will not permanently resolve OBDII code P3474. The code is likely to reappear once the problem is still present.

9. Are there any preventive measures to avoid OBDII code P3474 in a Dodge in the future?

- Regular maintenance, such as changing engine oil and following the manufacturer's recommended service intervals, can help prevent issues that may lead to OBDII code P3474.

10. Can a faulty intake valve control solenoid cause other related OBDII codes to appear in a Dodge?

- Yes, a faulty intake valve control solenoid can potentially trigger other related OBDII codes, such as those related to intake valve control circuit malfunctions or cylinder deactivation issues.

Discuss the causes and fixes for P3474 Dodge OBDII Code

Submit a New Comment

Code P3474 Dodge comments

No comments found for this page.