P3468 Dodge Code - Cylinder 9 Deactivation/Intake Valve Control Circuit High
Quick Answer
The P3468 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the Cylinder 9 Deactivation/Intake Valve Control Circuit being too high. Common causes include Faulty intake valve control solenoid, Wiring issues or electrical faults in the intake valve control circuit, Clogged or dirty intake valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3468 Dodge indicates Cylinder 9 Deactivation/Intake Valve Control Circuit High.
- Common causes
- Common causes include Faulty intake valve control solenoid, Wiring issues or electrical faults in the intake valve control circuit, Clogged or dirty intake valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3468 Dodge Description
The P3468 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the Cylinder 9 Deactivation/Intake Valve Control Circuit being too high. This code is specifically related to the Variable Valve Timing (VVT) system, which is responsible for optimizing engine performance and fuel efficiency by adjusting the timing of the intake and exhaust valves. In this case, Cylinder 9 refers to the specific cylinder in the engine that is experiencing the issue.
Common Causes of P3468 Dodge
- Faulty intake valve control solenoid
- Wiring issues or electrical faults in the intake valve control circuit
- Clogged or dirty intake valve
- Engine oil sludge or debris affecting VVT components
- Malfunctioning engine control module (ECM)
Symptoms of P3468 Dodge
- Decreased engine performance or power
- Rough idling or stalling
- Increased fuel consumption
- Illumination of the check engine light
- Engine misfires
How to Fix P3468 Dodge
- Diagnose the specific cause of the high intake valve control circuit, using a diagnostic scanner to retrieve freeze frame data and pinpoint the issue.
- Inspect the intake valve control solenoid and wiring for any visible damage or signs of wear. Replace any faulty components.
- Clean the intake valve and VVT components to remove any sludge or debris that may be causing the malfunction.
- Test the repair by clearing the code and running the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be necessary to identify any underlying issues with the VVT system.
Cost to Fix P3468 Dodge
The cost of repairing a P3468 code for Cylinder 9 Deactivation/Intake Valve Control Circuit High can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the repair may range from $200 to $500, including parts and labor. It is recommended to consult with a trusted mechanic or dealership to get an accurate estimate based on your vehicle's make and model. Keep in mind that additional diagnostic time and potential parts replacements could impact the final cost of the repair.
Need more information about the P3468 Dodge code?
Need more information on how to fix the P3468 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3468 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3468 Dodge Code
What does the OBDII code P3468 mean on a Dodge vehicle?
The P3468 code indicates an issue with Cylinder 9 Deactivation/Intake Valve Control Circuit, specifically a high voltage condition detected by the powertrain control module (PCM).
What are the common symptoms of the P3468 code?
Common symptoms include reduced fuel efficiency, poor engine performance, the engine running rough, and the check engine light turning on.
What causes the P3468 code to appear?
Potential causes include a faulty intake valve control solenoid, damaged wiring or connectors in the circuit, a malfunctioning PCM, or low oil pressure.
Can low oil pressure trigger the P3468 code?
Yes, low oil pressure can affect the operation of the cylinder deactivation system and trigger the P3468 code.
How is the P3468 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the wiring and connectors, test the intake valve control solenoid, and check the oil pressure and condition.
Can I drive my Dodge with the P3468 code?
Driving with the P3468 code is not recommended, as it can lead to poor performance and potential engine damage over time.
How do I fix the P3468 code on my Dodge vehicle?
Common repairs include replacing the intake valve control solenoid, repairing or replacing damaged wiring, addressing oil pressure issues, or reprogramming the PCM if necessary.
Is the P3468 code related to the cylinder deactivation system?
Yes, the code directly relates to the cylinder deactivation system, which shuts down specific cylinders to improve fuel efficiency.
What tools are needed to diagnose and repair the P3468 code?
Typical tools include an OBDII scan tool, a multimeter for electrical testing, and possibly an oil pressure gauge to verify oil pressure.
Does the P3468 code only apply to Dodge vehicles?
No, the P3468 code is a generic OBDII code and can appear on other makes and models with cylinder deactivation systems, but the specifics may vary.
Discuss the causes and fixes for P3468 Dodge OBDII Code
Code P3468 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.