P3428 2017 GMC Sierra Code - Cylinder 4 Deactivation Solenoid Valve Control Circuit High Voltage
Quick Answer
The diagnostic trouble code P3428 in a 2017 GMC Sierra refers to an issue with the Cylinder 4 Deactivation Solenoid Valve Control Circuit High Voltage. Common causes include Faulty Solenoid Valve: The solenoid valve itself may be defective and not operating as it should, causing the high voltage condition, Wiring Issues: Damage to the wiring harness or connectors that connect to the solenoid valve can disrupt the electrical signal and trigger the code, Engine Control Module (ECM) Malfunction: A problem with the ECM, which controls the solenoid valve, can also lead to this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3428 2017 GMC Sierra indicates Cylinder 4 Deactivation Solenoid Valve Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Solenoid Valve: The solenoid valve itself may be defective and not operating as it should, causing the high voltage condition, Wiring Issues: Damage to the wiring harness or connectors that connect to the solenoid valve can disrupt the electrical signal and trigger the code, Engine Control Module (ECM) Malfunction: A problem with the ECM, which controls the solenoid valve, can also lead to this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3428 2017 GMC Sierra Description
The diagnostic trouble code P3428 in a 2017 GMC Sierra refers to an issue with the Cylinder 4 Deactivation Solenoid Valve Control Circuit High Voltage. This code indicates that there is a problem with the electrical circuit that controls the deactivation solenoid for cylinder 4 in the engine. In vehicles equipped with cylinder deactivation technology, certain cylinders can be shut off to improve fuel efficiency under light-load conditions. The solenoid valve controls this process by activating or deactivating the cylinder as needed.
Common Causes of P3428 2017 GMC Sierra
- Faulty Solenoid Valve: The solenoid valve itself may be defective and not operating as it should, causing the high voltage condition.
- Wiring Issues: Damage to the wiring harness or connectors that connect to the solenoid valve can disrupt the electrical signal and trigger the code.
- Engine Control Module (ECM) Malfunction: A problem with the ECM, which controls the solenoid valve, can also lead to this code.
- Poor Electrical Ground: A weak or poor electrical ground connection can cause voltage fluctuations that affect the solenoid valve control circuit.
Symptoms of P3428 2017 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Rough Idle: The engine may experience rough idling or misfires due to the cylinder deactivation not functioning correctly.
- Reduced Fuel Efficiency: A faulty cylinder deactivation solenoid can lead to decreased fuel efficiency as the engine may not be running as efficiently as it should.
- Engine Stalling: In severe cases, the engine may stall or have difficulty starting due to the cylinder deactivation issue.
How to Fix P3428 2017 GMC Sierra
- Diagnose the Issue: Use a scan tool to read the code and perform further testing to pinpoint the exact cause of the high voltage condition.
- Inspect Wiring and Connectors: Check the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test Solenoid Valve: Test the solenoid valve itself to ensure it is functioning properly. Replace if necessary.
- Check ECM Functionality: Verify that the ECM is sending the correct signals to the solenoid valve. Replace the ECM if it is faulty.
- Clear Codes and Test Drive: After completing the repair, clear the codes from the system and take the vehicle for a test drive to ensure the issue has been resolved.
Cost to Fix P3428 2017 GMC Sierra
The cost of repairing a Cylinder 4 Deactivation Solenoid Valve Control Circuit High Voltage issue in a 2017 GMC Sierra can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the parts for this repair can range from $100 to $300, while labor costs can add another $100 to $300. This brings the total repair cost to around $200 to $600. Keep in mind that these are rough estimates and actual costs may vary based on the location of the repair shop, the make and model of the vehicle, and any additional diagnostic or repair work required. It's recommended to consult with a qualified mechanic for a more accurate cost assessment.
Need more information about the P3428 2017 GMC Sierra code?
Need more information on how to fix the P3428 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3428 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3428 2017 GMC Sierra Code
1. What does the OBDII code P3428 mean on a 2017 GMC Sierra?
P3428 indicates a high voltage issue in the Cylinder 4 Deactivation Solenoid Valve Control Circuit, which is part of the Active Fuel Management (AFM) system.
2. What are the symptoms of code P3428 in a 2017 GMC Sierra?
Common symptoms include reduced engine performance, poor fuel economy, rough idling, and the Check Engine Light illuminated.
3. What causes the P3428 code to appear on a 2017 GMC Sierra?
Possible causes include a faulty Cylinder 4 Deactivation Solenoid, damaged wiring or connectors in the circuit, or a malfunctioning Engine Control Module (ECM).
4. Can a dirty engine oil filter trigger the P3428 code?
Yes, a clogged oil filter or low engine oil can restrict oil flow to the AFM solenoids, potentially triggering this code.
5. How do you diagnose the P3428 code on a 2017 GMC Sierra?
Diagnosis involves scanning for codes, inspecting the Cylinder 4 Deactivation Solenoid, checking wiring and connectors, and testing the circuit voltage with a multimeter.
6. Is it safe to drive with the P3428 code on a 2017 GMC Sierra?
Driving is possible but not recommended, as it can lead to engine misfires, poor performance, and potential long-term damage to the AFM system.
7. How much does it cost to fix the P3428 code on a 2017 GMC Sierra?
Repairs can cost between $150 and $400, depending on whether the Cylinder 4 Deactivation Solenoid, wiring, or other components need replacement.
8. Can I fix the P3428 code on my 2017 GMC Sierra myself?
If you have basic mechanical skills, you can check and replace damaged wiring or the solenoid. However, more complex issues may require professional assistance.
9. Does a software update fix the P3428 code on a 2017 GMC Sierra?
In rare cases, an ECM software update may resolve the issue, but it’s typically caused by physical component failure or wiring problems.
10. What happens if the P3428 code is ignored on a 2017 GMC Sierra?
Ignoring the code can lead to increased fuel consumption, engine misfires, and potential damage to the AFM system or engine components.
Discuss the causes and fixes for P3428 2017 GMC Sierra OBDII Code
Code P3428 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.