P3426 2018 GMC Sierra Code - Cylinder 4 Deactivation Solenoid Valve Control Performance
Quick Answer
The P3426 diagnostic trouble code (DTC) for a 2018 GMC Sierra relates to the Cylinder 4 Deactivation Solenoid Valve Control Performance. Common causes include Faulty cylinder 4 deactivation solenoid valve, Electrical issues such as wiring faults or poor connections, Mechanical problems with the solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3426 2018 GMC Sierra indicates Cylinder 4 Deactivation Solenoid Valve Control Performance.
- Common causes
- Common causes include Faulty cylinder 4 deactivation solenoid valve, Electrical issues such as wiring faults or poor connections, Mechanical problems with the solenoid valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3426 2018 GMC Sierra Description
The P3426 diagnostic trouble code (DTC) for a 2018 GMC Sierra relates to the Cylinder 4 Deactivation Solenoid Valve Control Performance. In vehicles equipped with cylinder deactivation technology, such as General Motors' Active Fuel Management (AFM) system, certain cylinders are deactivated under light load conditions to improve fuel efficiency. The solenoid valve controls the oil flow to the lifters, allowing them to collapse and prevent the valves from opening on the deactivated cylinders.
Common Causes of P3426 2018 GMC Sierra
- Faulty cylinder 4 deactivation solenoid valve
- Electrical issues such as wiring faults or poor connections
- Mechanical problems with the solenoid valve
- Clogging of the solenoid valve due to debris or sludge buildup
- PCM (Powertrain Control Module) malfunctions
Symptoms of P3426 2018 GMC Sierra
- Reduced fuel efficiency
- Rough idling or vibrations
- Loss of power during acceleration
- Engine misfires
- Illumination of the check engine light
How to Fix P3426 2018 GMC Sierra
- Begin by conducting a thorough inspection of the cylinder 4 deactivation solenoid valve and related components.
- Test the solenoid valve for proper operation using a multimeter to check for continuity and resistance.
- Clean or replace the solenoid valve if clogged or faulty.
- Inspect and repair any damaged wiring or connections.
- Clear the DTC and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P3426 2018 GMC Sierra
The typical repair costs for addressing a P3426 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts such as a new solenoid valve and any necessary wiring or connectors can range from $100 to $300. Labor costs at auto repair shops typically range from $80 to $150 per hour. Additional diagnostic time may be required to pinpoint the exact cause of the problem. It's advisable to consult with a trusted mechanic or dealership to obtain a more accurate estimate based on your location and vehicle specifics.
Need more information about the P3426 2018 GMC Sierra code?
Need more information on how to fix the P3426 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3426 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3426 2018 GMC Sierra Code
1. What does the OBDII code P3426 mean on a 2018 GMC Sierra?
P3426 indicates an issue with the Cylinder 4 Deactivation Solenoid Valve Control Performance, meaning the solenoid responsible for deactivating cylinder 4 is not functioning as expected.
2. What are the symptoms of a P3426 code in a 2018 GMC Sierra?
Common symptoms include reduced fuel efficiency, rough idling, engine misfires, poor performance, and the Check Engine Light turning on.
3. What causes the P3426 code on a 2018 GMC Sierra?
Possible causes include a faulty cylinder deactivation solenoid, clogged oil passages, low oil pressure, damaged wiring or connectors, or a malfunctioning Engine Control Module (ECM).
4. Can low oil pressure trigger the P3426 code in a 2018 GMC Sierra?
Yes, low oil pressure can cause the Cylinder 4 Deactivation Solenoid to malfunction, leading to this code.
5. How do you diagnose the P3426 code on a 2018 GMC Sierra?
Diagnosis involves scanning for codes, inspecting the solenoid and wiring for damage, checking oil pressure, and verifying the solenoid's operation using a multimeter or scan tool.
6. Can I drive my 2018 GMC Sierra with a P3426 code?
Driving with this code is not recommended as it may lead to engine misfires, reduced performance, and potential long-term engine damage.
7. How is the P3426 code fixed on a 2018 GMC Sierra?
Repairs may include replacing the Cylinder 4 Deactivation Solenoid, cleaning or replacing clogged oil passages, fixing damaged wiring, or updating/replacing the ECM.
8. Does the P3426 code always mean the solenoid is bad?
Not necessarily. It could also be caused by oil pressure issues, wiring problems, or a fault in the ECM.
9. How much does it cost to fix a P3426 code on a 2018 GMC Sierra?
The cost varies depending on the root cause, but replacing the solenoid typically costs $150–$300, including parts and labor.
10. How can I prevent the P3426 code from reappearing on my 2018 GMC Sierra?
Regular oil changes with the correct oil grade, maintaining proper oil pressure, and promptly addressing engine warning lights can help prevent this code.
Discuss the causes and fixes for P3426 2018 GMC Sierra OBDII Code
Code P3426 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.