P3407 Code - Cylinder 1 Exhaust Valve Control Circuit Low
Quick Answer
The P3407 diagnostic trouble code (DTC) indicates that there is a problem with the Cylinder 1 Exhaust Valve Control Circuit being detected as low. Common causes include Faulty Exhaust Valve Control Solenoid: A malfunctioning exhaust valve control solenoid can cause the circuit to register low voltage, triggering the P3407 code, Wiring Issues: Damaged or corroded wiring in the exhaust valve control circuit can lead to a low voltage signal being detected by the ECM, ECM Malfunction: A faulty Engine Control Module can also be a potential cause of the P3407 code, as it may not be properly interpreting the signals from the exhaust valve control circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3407 indicates Cylinder 1 Exhaust Valve Control Circuit Low.
- Common causes
- Common causes include Faulty Exhaust Valve Control Solenoid: A malfunctioning exhaust valve control solenoid can cause the circuit to register low voltage, triggering the P3407 code, Wiring Issues: Damaged or corroded wiring in the exhaust valve control circuit can lead to a low voltage signal being detected by the ECM, ECM Malfunction: A faulty Engine Control Module can also be a potential cause of the P3407 code, as it may not be properly interpreting the signals from the exhaust valve control circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3407 Description
The P3407 diagnostic trouble code (DTC) indicates that there is a problem with the Cylinder 1 Exhaust Valve Control Circuit being detected as low. This means that the Engine Control Module (ECM) has detected a lower than expected voltage signal from the exhaust valve control circuit for cylinder 1. This can lead to issues with the proper functioning of the exhaust valve, which plays a crucial role in the engine's performance and emissions control.
Common Causes of P3407
- Faulty Exhaust Valve Control Solenoid: A malfunctioning exhaust valve control solenoid can cause the circuit to register low voltage, triggering the P3407 code.
- Wiring Issues: Damaged or corroded wiring in the exhaust valve control circuit can lead to a low voltage signal being detected by the ECM.
- ECM Malfunction: A faulty Engine Control Module can also be a potential cause of the P3407 code, as it may not be properly interpreting the signals from the exhaust valve control circuit.
- Poor Electrical Connection: Loose or poor electrical connections in the exhaust valve control circuit can result in a low voltage signal being sent to the ECM.
- Exhaust Valve Control Circuit Short: A short circuit in the exhaust valve control circuit can cause the voltage to drop below the expected level, triggering the P3407 code.
Symptoms of P3407
- Check Engine Light: The most common symptom associated with the P3407 code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in power output and overall performance due to the improper functioning of the exhaust valve control circuit.
- Rough Idle: A rough or unstable idle may be noticed when the exhaust valve control circuit is not working correctly.
- Increased Emissions: The vehicle may produce higher emissions than usual, which can lead to environmental concerns and potential regulatory issues.
How to Fix P3407
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the exhaust valve control circuit, including the solenoid, wiring, and connections.
- Replace Faulty Components: If a faulty exhaust valve control solenoid or damaged wiring is identified, replace the defective components with new ones.
- Repair Wiring: Repair any damaged or corroded wiring in the exhaust valve control circuit to ensure proper electrical connections.
- Clear DTC: After completing the repairs, clear the DTC from the ECM memory using a scan tool to reset the check engine light.
- Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the check engine light remains off.
Cost to Fix P3407
The typical repair costs for addressing the P3407 code can vary depending on the specific cause of the issue and the vehicle's make and model. In general, the cost of replacing a faulty exhaust valve control solenoid or repairing damaged wiring can range from $150 to $400. Additional costs may include labor charges, which can vary between $80 and $150 per hour at most auto repair shops. It is advisable to consult with a professional mechanic to get an accurate estimate based on the individual circumstances of the vehicle.
Need more information about the P3407 code?
Need more information on how to fix the P3407 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3407 code diagnosed by a professional: Find a repair shop in your area
Code P3407 Information for Specific Makes
- P3407 Dodge — Cylinder 1 Exhaust Valve Control Circuit Low
Frequently Asked Questions about P3407 Code
No Frequently Asked Questions about P3407 Code found.
Discuss the causes and fixes for P3407 OBDII Code
Code P3407 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.