Engine-Codes.com
Engine-Codes – GMC – P3404 2014 GMC Sierra

P3404 2014 GMC Sierra Code - Cylinder 1 Deactivation Solenoid Valve Control Circuit High Voltage

Quick Answer

The P3404 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the Cylinder 1 Deactivation Solenoid Valve Control Circuit High Voltage. Common causes include Faulty Cylinder 1 Deactivation Solenoid Valve, Wiring or connector issues in the control circuit, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P3404 2014 GMC Sierra indicates Cylinder 1 Deactivation Solenoid Valve Control Circuit High Voltage.
Common causes
Common causes include Faulty Cylinder 1 Deactivation Solenoid Valve, Wiring or connector issues in the control circuit, ECM software malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P3404 2014 GMC Sierra Description

The P3404 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the Cylinder 1 Deactivation Solenoid Valve Control Circuit High Voltage. In vehicles equipped with cylinder deactivation technology, such as GM's Active Fuel Management (AFM) system, certain cylinders can be deactivated during light load conditions to improve fuel efficiency. The solenoid valve controls the oil flow to deactivate the cylinders, and if the control circuit voltage is too high, it can lead to various performance issues.

OBDII Code P3404 2014 GMC Sierra - Cylinder 1 Deactivation Solenoid Valve Control Circuit High Voltage
P3404 2014 GMC Sierra Code - Cylinder 1 Deactivation Solenoid Valve Control Circuit High Voltage

Common Causes of P3404 2014 GMC Sierra

  1. Faulty Cylinder 1 Deactivation Solenoid Valve
  2. Wiring or connector issues in the control circuit
  3. ECM software malfunction
  4. Low engine oil level or poor oil quality
  5. Mechanical issues with the cylinder deactivation system

Symptoms of P3404 2014 GMC Sierra

  1. Check Engine Light illuminated
  2. Reduced fuel efficiency
  3. Engine misfires
  4. Rough idling
  5. Loss of power under certain driving conditions

How to Fix P3404 2014 GMC Sierra

  1. Begin by diagnosing the specific cause of the high voltage in the Cylinder 1 Deactivation Solenoid Valve Control Circuit using a scan tool.
  2. Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
  3. Test the Cylinder 1 Deactivation Solenoid Valve for proper operation and replace if faulty.
  4. Check the engine oil level and quality, ensuring it meets manufacturer specifications.
  5. Clear the DTC and perform a test drive to verify that the issue has been resolved.

Cost to Fix P3404 2014 GMC Sierra

The cost of repairing a P3404 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, replacing a faulty Cylinder 1 Deactivation Solenoid Valve can cost between $150 and $300, including parts and labor. If wiring repairs or ECM reprogramming are necessary, additional costs may apply. It's recommended to consult with a qualified mechanic or dealership for an accurate estimate based on the specific diagnosis and repair needed. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.

Need more information about the P3404 2014 GMC Sierra code?

Need more information on how to fix the P3404 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3404 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3404 2014 GMC Sierra Code

1. What does the OBDII code P3404 mean on a 2014 GMC Sierra?

P3404 indicates an issue with the Cylinder 1 Deactivation Solenoid Valve Control Circuit, specifically a high voltage condition detected by the powertrain control module (PCM).

2. What are the common symptoms of code P3404?

Common symptoms include reduced engine performance, poor fuel economy, rough idling, the check engine light illuminating, and difficulty activating the cylinder deactivation system.

3. What causes the P3404 code to appear?

Possible causes include a faulty cylinder 1 deactivation solenoid, damaged wiring or connectors in the solenoid circuit, a malfunctioning PCM, or low engine oil pressure affecting the deactivation system.

4. Can low engine oil cause the P3404 code?

Yes, low engine oil or dirty oil can affect the cylinder deactivation system's operation, leading to issues like high voltage in the solenoid circuit.

5. How do I diagnose the P3404 code?

To diagnose, inspect the wiring and connectors for damage or corrosion, test the cylinder 1 deactivation solenoid with a multimeter, check the oil level and condition, and use a scan tool to monitor solenoid operation.

6. Can I drive my 2014 GMC Sierra with the P3404 code?

While the vehicle may still be drivable, ignoring the code can result in reduced performance, increased fuel consumption, and potential damage to the engine or cylinder deactivation system over time.

7. How is the P3404 code fixed?

Repairs may include replacing the cylinder 1 deactivation solenoid, repairing or replacing damaged wiring or connectors, changing the engine oil and filter, or reprogramming or replacing the PCM if necessary.

8. How much does it cost to fix the P3404 code?

The repair cost depends on the exact issue but typically ranges from $150 to $400, including parts and labor, with solenoid replacement being a common fix.

9. Can a faulty PCM cause the P3404 code?

Yes, a malfunctioning PCM could misinterpret signals or fail to properly control the solenoid, leading to a high voltage reading and triggering the P3404 code.

10. How do I prevent the P3404 code from recurring?

Regular maintenance, including timely oil changes with the correct oil type, inspecting wiring for damage, and addressing check engine light issues promptly, can help prevent the code from reappearing.

Discuss the causes and fixes for P3404 2014 GMC Sierra OBDII Code

Submit a New Comment

Code P3404 2014 GMC Sierra comments

No comments found for this page.