P3402 Chrysler Code - Cylinder 1 Deactivation Control Performance
Quick Answer
The P3402 diagnostic trouble code (DTC) for Chrysler vehicles specifically pertains to Cylinder 1 Deactivation Control Performance. Common causes include Faulty Deactivation Solenoid: A malfunctioning deactivation solenoid can prevent cylinder 1 from being deactivated properly, Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the PCM and the deactivation system, Mechanical Failure: Internal engine issues, such as worn-out components or a damaged camshaft, can impact the cylinder deactivation process. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P3402 Chrysler indicates Cylinder 1 Deactivation Control Performance.
- Common causes
- Common causes include Faulty Deactivation Solenoid: A malfunctioning deactivation solenoid can prevent cylinder 1 from being deactivated properly, Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the PCM and the deactivation system, Mechanical Failure: Internal engine issues, such as worn-out components or a damaged camshaft, can impact the cylinder deactivation process.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P3402 Chrysler Description
The P3402 diagnostic trouble code (DTC) for Chrysler vehicles specifically pertains to Cylinder 1 Deactivation Control Performance. This code indicates that there is an issue with the deactivation system for cylinder 1 in the engine. Modern engines often feature cylinder deactivation technology, which allows certain cylinders to be turned off under light load conditions to improve fuel efficiency. The deactivation control system monitors and controls this process, ensuring that it operates smoothly and effectively.
Common Causes of P3402 Chrysler
- Faulty Deactivation Solenoid: A malfunctioning deactivation solenoid can prevent cylinder 1 from being deactivated properly.
- Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the PCM and the deactivation system.
- Mechanical Failure: Internal engine issues, such as worn-out components or a damaged camshaft, can impact the cylinder deactivation process.
- PCM Malfunction: A faulty PCM can incorrectly interpret data from the deactivation system, triggering the P3402 code.
- Software Glitch: Occasionally, software glitches within the PCM can cause erroneous fault codes to be generated, including P3402.
Symptoms of P3402 Chrysler
- Check Engine Light: The most obvious symptom associated with the P3402 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Reduced Fuel Efficiency: The engine's fuel efficiency may be adversely affected, as the cylinder deactivation system is not functioning optimally.
- Engine Misfires: Cylinder deactivation issues can lead to engine misfires, causing rough idling or hesitation during acceleration.
- Loss of Power: The vehicle may experience a decrease in power output, especially during acceleration or when driving uphill.
- Increased Emissions: A faulty cylinder deactivation system can result in increased emissions, potentially causing the vehicle to fail emissions tests.
How to Fix P3402 Chrysler
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform a thorough inspection of the cylinder 1 deactivation system.
- Inspect Wiring and Connections: Check for any damaged or corroded wiring connections that may be causing communication issues.
- Test Deactivation Solenoid: Test the deactivation solenoid for proper function and replace if necessary.
- Check Engine Components: Inspect the camshaft, lifters, and other related components for any signs of wear or damage that could be affecting cylinder deactivation.
- Clear Fault Code: Once the issue has been addressed, clear the fault code from the PCM memory and test drive the vehicle to ensure the problem has been resolved.
Cost to Fix P3402 Chrysler
The cost of repairing the P3402 code for Cylinder 1 Deactivation Control Performance can vary depending on the specific cause of the issue and the labor rates in your area. On average, the repair cost for this problem can range from $200 to $500, including parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to obtain quotes from multiple sources before proceeding with the repair.
Tech Notes for P3402 Chrysler
Need more information about the P3402 Chrysler code?
Need more information on how to fix the P3402 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P3402 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P3402 Chrysler Code
No Frequently Asked Questions about P3402 Chrysler Code found.
Discuss the causes and fixes for P3402 Chrysler OBDII Code
Code P3402 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.