Engine-Codes.com
Engine-Codes – GMC – P2C12 2019 GMC Sierra

P2C12 2019 GMC Sierra Code - Exhaust Camshaft Profile Actuator Position Sensor 1 Circuit

Quick Answer

The P2C12 code indicates a problem with the Exhaust Camshaft Profile Actuator Position Sensor 1 Circuit, which is crucial for the proper functioning of the variable valve timing (VVT) system in your vehicle. Common causes include Faulty Exhaust Camshaft Profile Actuator, Exhaust Camshaft Profile Actuator harness is open or shorted, Poor electrical connection in the Exhaust Camshaft Profile Actuator circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2C12 2019 GMC Sierra indicates Exhaust Camshaft Profile Actuator Position Sensor 1 Circuit.
Common causes
Common causes include Faulty Exhaust Camshaft Profile Actuator, Exhaust Camshaft Profile Actuator harness is open or shorted, Poor electrical connection in the Exhaust Camshaft Profile Actuator circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on May 31, 2026
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2C12 2019 GMC Sierra Description

The P2C12 code indicates a problem with the Exhaust Camshaft Profile Actuator Position Sensor 1 Circuit, which is crucial for the proper functioning of the variable valve timing (VVT) system in your vehicle. This sensor is integral to the exhaust camshaft profile actuator assembly, providing real-time feedback to the Engine Control Module (ECM) regarding the position of the actuator pins. These pins are responsible for adjusting the exhaust camshaft profile sleeve, allowing the engine to optimize its performance based on varying operating conditions. The sensor employs a Hall-effect element that detects changes in a magnetic field, translating this information into a signal that informs the ECM about the actuator's position.
OBDII Code P2C12 2019 GMC Sierra - Exhaust Camshaft Profile Actuator Position Sensor 1 Circuit
P2C12 2019 GMC Sierra Code - Exhaust Camshaft Profile Actuator Position Sensor 1 Circuit

Common Causes of P2C12 2019 GMC Sierra

  1. Faulty Exhaust Camshaft Profile Actuator
  2. Exhaust Camshaft Profile Actuator harness is open or shorted
  3. Poor electrical connection in the Exhaust Camshaft Profile Actuator circuit
  4. Faulty Engine Control Module (ECM)
  5. Mechanical issues such as sticking actuator pins or debris within the actuator assembly

Symptoms of P2C12 2019 GMC Sierra

  1. Engine Light ON (or Service Engine Soon Warning Light)
  2. Reduced engine performance or power loss during acceleration
  3. Increased fuel consumption or poor fuel economy
  4. Rough idling or engine misfires
  5. Unusual engine noises, particularly during startup or acceleration

How to Fix P2C12 2019 GMC Sierra

  1. Perform a visual inspection of the wiring and connectors associated with the Exhaust Camshaft Profile Actuator for signs of damage or corrosion.
  2. Test the Exhaust Camshaft Profile Actuator Position Sensor using a multimeter to check for proper voltage and resistance readings.
  3. If the sensor is found to be faulty, replace it with a new unit and ensure proper installation and sealing.
  4. Inspect the actuator assembly for mechanical issues, such as sticking pins or debris, and clean or replace components as necessary.
  5. Clear the fault codes from the ECM and perform a road test to verify that the issue has been resolved and that the engine operates smoothly.

Cost to Fix P2C12 2019 GMC Sierra

The cost to diagnose and repair the P2C12 code typically ranges from $200 to $600, depending on the specific issue and required repairs. This estimate includes parts and labor, with sensor replacements generally costing between $100 and $300. Labor rates vary widely, with most shops charging between $80 and $150 per hour; dealership rates tend to be higher, while independent shops may offer more competitive pricing. Always consider the make and model of your vehicle, as well as your local market conditions, when estimating repair costs.

Need more information about the P2C12 2019 GMC Sierra code?

Need more information on how to fix the P2C12 2019 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2C12 2019 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2C12 2019 GMC Sierra Code

No Frequently Asked Questions about P2C12 2019 GMC Sierra Code found.

Discuss the causes and fixes for P2C12 2019 GMC Sierra OBDII Code

Submit a New Comment

Code P2C12 2019 GMC Sierra comments

No comments found for this page.