P2824 2014 GMC Sierra Code - Transmission Control Solenoid Valve 9 Control Circuit Open
Quick Answer
The P2824 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Transmission Control Solenoid Valve 9 Control Circuit being open. Common causes include Faulty Solenoid Valve: The solenoid valve itself may be defective, causing the control circuit to remain open, Wiring Issues: Damage to the wiring harness or connectors that supply power to the solenoid valve can result in an open circuit, Poor Electrical Connection: Corrosion or poor connections at the solenoid valve or TCM can disrupt the electrical signal. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2824 2014 GMC Sierra indicates Transmission Control Solenoid Valve 9 Control Circuit Open.
- Common causes
- Common causes include Faulty Solenoid Valve: The solenoid valve itself may be defective, causing the control circuit to remain open, Wiring Issues: Damage to the wiring harness or connectors that supply power to the solenoid valve can result in an open circuit, Poor Electrical Connection: Corrosion or poor connections at the solenoid valve or TCM can disrupt the electrical signal.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2824 2014 GMC Sierra Description
The P2824 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Transmission Control Solenoid Valve 9 Control Circuit being open. In automatic transmissions, solenoid valves are responsible for controlling the flow of transmission fluid, which is crucial for shifting gears smoothly. Solenoid Valve 9 is specifically related to a certain gear or function within the transmission system.
Common Causes of P2824 2014 GMC Sierra
- Faulty Solenoid Valve: The solenoid valve itself may be defective, causing the control circuit to remain open.
- Wiring Issues: Damage to the wiring harness or connectors that supply power to the solenoid valve can result in an open circuit.
- Poor Electrical Connection: Corrosion or poor connections at the solenoid valve or TCM can disrupt the electrical signal.
- TCM Malfunction: A malfunctioning Transmission Control Module may not be sending the correct signals to the solenoid valve.
- Fluid Contamination: Contaminants in the transmission fluid can cause damage to the solenoid valve or affect its operation.
Symptoms of P2824 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with a P2824 code is the illumination of the check engine light on the vehicle's dashboard.
- Harsh Shifting: The transmission may exhibit harsh or erratic shifting patterns, especially when changing gears.
- Delayed Engagement: There may be a delay in the transmission engaging when shifting from park to drive or reverse.
- Transmission Slipping: The transmission may slip out of gear or struggle to maintain the correct gear ratio while driving.
- Reduced Fuel Efficiency: A malfunctioning solenoid valve can impact the overall efficiency of the transmission system, leading to decreased fuel economy.
How to Fix P2824 2014 GMC Sierra
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the transmission system to identify the root cause of the problem.
- Test Solenoid Valve: Test the solenoid valve for proper operation and resistance to determine if it needs to be replaced.
- Check Wiring and Connections: Inspect the wiring harness, connectors, and terminals for any damage or corrosion. Repair or replace as necessary.
- Verify TCM Function: Ensure that the Transmission Control Module is functioning correctly and sending the appropriate signals to the solenoid valve.
- Clear Codes and Test Drive: Clear the DTC from the TCM memory, reset the check engine light, and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P2824 2014 GMC Sierra
The typical repair costs for addressing a P2824 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, replacing a faulty solenoid valve can range from $150 to $300, while addressing wiring or connection issues may cost between $100 and $200. If the TCM needs to be replaced, the cost can be higher, potentially exceeding $500.
Need more information about the P2824 2014 GMC Sierra code?
Need more information on how to fix the P2824 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2824 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2824 2014 GMC Sierra Code
1. What does the OBDII code P2824 mean on a 2014 GMC Sierra?
P2824 indicates an issue with the Transmission Control Solenoid Valve 9 Control Circuit being open, which affects the transmission's ability to shift properly.
2. What are the common symptoms of the P2824 code in a 2014 GMC Sierra?
Symptoms may include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, or the vehicle entering limp mode.
3. What causes the P2824 code to appear on a 2014 GMC Sierra?
Common causes include a faulty transmission control solenoid, damaged wiring or connectors in the control circuit, low transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2014 GMC Sierra with the P2824 code?
It’s not recommended to drive the vehicle for an extended period, as this issue can cause further damage to the transmission and affect drivability.
5. How do I diagnose the P2824 code on a 2014 GMC Sierra?
Start by using a scan tool to confirm the code, inspect the transmission control solenoid and its wiring for disconnections or damage, and check the transmission fluid level and condition.
6. What transmission components should I check for the P2824 code?
Inspect the transmission control solenoid, wiring harness, connectors, and the transmission control module for any signs of damage or failure.
7. How much does it cost to repair the P2824 code on a 2014 GMC Sierra?
Repair costs can range from $200 to $1,000, depending on whether the issue is with the solenoid, wiring, or control module.
8. Can low transmission fluid cause the P2824 code?
Yes, low or dirty transmission fluid can impact solenoid function and trigger the P2824 code.
9. Is the P2824 code a common issue for the 2014 GMC Sierra?
This code is not extremely common but can occur, especially as the vehicle ages or if the transmission is not properly maintained.
10. How can I prevent the P2824 code from occurring in my 2014 GMC Sierra?
Regularly check and maintain the transmission fluid, inspect wiring for damage, and ensure the transmission control solenoids are functioning correctly during routine maintenance.
Discuss the causes and fixes for P2824 2014 GMC Sierra OBDII Code
Code P2824 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.