P2814 2018 Chevrolet Silverado Code - Transmission Control Solenoid Valve 7 Control Circuit Low Voltage
Quick Answer
The P2814 diagnostic trouble code (DTC) for a 2018 Chevrolet Silverado refers to a Transmission Control Solenoid Valve 7 Control Circuit Low Voltage. Common causes include Malfunctioning transmission control solenoid valve 7, Faulty wiring or connections in the control circuit, Damaged electrical components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2814 2018 Chevrolet Silverado indicates Transmission Control Solenoid Valve 7 Control Circuit Low Voltage.
- Common causes
- Common causes include Malfunctioning transmission control solenoid valve 7, Faulty wiring or connections in the control circuit, Damaged electrical components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2814 2018 Chevrolet Silverado Description
The P2814 diagnostic trouble code (DTC) for a 2018 Chevrolet Silverado refers to a Transmission Control Solenoid Valve 7 Control Circuit Low Voltage. This code indicates that there is a problem with the electrical circuit that controls the transmission control solenoid valve 7, resulting in a lower than normal voltage being detected. The transmission control solenoid valves are responsible for regulating the flow of transmission fluid within the transmission system, which is crucial for proper gear shifting and overall transmission operation.
Common Causes of P2814 2018 Chevrolet Silverado
- Malfunctioning transmission control solenoid valve 7
- Faulty wiring or connections in the control circuit
- Damaged electrical components
- Issues with the powertrain control module (PCM)
- Corrosion or poor connections in the electrical system
Symptoms of P2814 2018 Chevrolet Silverado
- Erratic shifting behavior
- Delayed or harsh shifting
- Slipping gears
- Limp mode operation
- Illumination of the Check Engine Light
How to Fix P2814 2018 Chevrolet Silverado
- Perform a comprehensive diagnostic scan to retrieve the specific trouble code and identify the root cause of the issue.
- Inspect the transmission control solenoid valve 7 and its wiring connections for any signs of damage or corrosion.
- Test the electrical components related to the control circuit to ensure proper voltage and continuity.
- Replace the faulty transmission control solenoid valve 7 if necessary, and repair any damaged wiring or connections.
- Clear the trouble code from the vehicle's memory and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P2814 2018 Chevrolet Silverado
The typical repair costs for addressing a Transmission Control Solenoid Valve 7 Control Circuit Low Voltage code can vary depending on the extent of the issue and the specific components that require replacement. Generally, the parts cost for a new solenoid valve can range from $100 to $300, while the labor costs for the repair can be between $150 and $300. Overall, the total repair cost can amount to $250 to $600. It is advisable to obtain quotes from local auto repair shops to get a more accurate estimate based on your location and vehicle specifics. Keep in mind that additional diagnostics or repairs may be needed, which could affect the final cost.
Need more information about the P2814 2018 Chevrolet Silverado code?
Need more information on how to fix the P2814 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2814 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2814 2018 Chevrolet Silverado Code
1. What does the OBDII code P2814 mean on a 2018 Chevrolet Silverado?
The P2814 code indicates a low voltage issue in the Transmission Control Solenoid Valve 7 control circuit, which can affect the transmission's ability to shift gears properly.
2. What are the common symptoms of the P2814 code in a 2018 Chevrolet Silverado?
Symptoms may include erratic or harsh shifting, transmission slipping, failure to engage certain gears, a lit Check Engine Light, and reduced fuel efficiency.
3. What causes the P2814 code to appear on a 2018 Chevrolet Silverado?
Common causes include a faulty transmission control solenoid, damaged wiring or connectors in the solenoid circuit, a malfunctioning transmission control module (TCM), or low transmission fluid levels.
4. Can I drive my 2018 Chevrolet Silverado with the P2814 code?
While it may be possible to drive, it's not recommended. Continued operation could cause further damage to the transmission or lead to unsafe driving conditions.
5. How do I diagnose the P2814 code on a 2018 Chevrolet Silverado?
Diagnosis involves checking the transmission fluid level, inspecting wiring and connectors for damage, testing the control solenoid for proper operation, and scanning the TCM for additional related codes.
6. How is the P2814 code fixed on a 2018 Chevrolet Silverado?
Repairs may include replacing the faulty solenoid, repairing or replacing damaged wiring or connectors, reprogramming or replacing the TCM, or topping off and flushing the transmission fluid if needed.
7. How much does it cost to repair the P2814 code in a 2018 Chevrolet Silverado?
Repair costs can vary, but replacing a transmission solenoid typically ranges from $150 to $400, while wiring repairs or TCM replacement can increase costs significantly.
8. Can a low battery cause the P2814 code in a 2018 Chevrolet Silverado?
Yes, a weak or low battery can result in insufficient voltage to the solenoid circuit, potentially triggering the P2814 code.
9. What tools are needed to troubleshoot the P2814 code on a 2018 Chevrolet Silverado?
You'll need an OBDII scanner, a multimeter for voltage testing, and possibly transmission-specific tools to access the solenoid if it requires replacement.
10. Does low transmission fluid trigger the P2814 code in a 2018 Chevrolet Silverado?
Yes, low or dirty transmission fluid can cause improper solenoid function, which may lead to the P2814 code being triggered.
Discuss the causes and fixes for P2814 2018 Chevrolet Silverado OBDII Code
Code P2814 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.