P2808 2016 GMC Sierra Code - Transmission Control Solenoid Valve 7 Stuck Off
Quick Answer
The P2808 diagnostic trouble code (DTC) indicates that the Transmission Control Solenoid Valve 7 is stuck in the off position. Common causes include Electrical faults in the solenoid circuit, Mechanical issues within the transmission, Debris or fluid contamination in the transmission system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2808 2016 GMC Sierra indicates Transmission Control Solenoid Valve 7 Stuck Off.
- Common causes
- Common causes include Electrical faults in the solenoid circuit, Mechanical issues within the transmission, Debris or fluid contamination in the transmission system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2808 2016 GMC Sierra Description
The P2808 diagnostic trouble code (DTC) indicates that the Transmission Control Solenoid Valve 7 is stuck in the off position. This solenoid valve is a crucial component of the transmission system, responsible for regulating the flow of transmission fluid to control gear shifting. When the solenoid valve is stuck off, it can lead to issues with gear shifting, transmission performance, and overall drivability of the vehicle.
Common Causes of P2808 2016 GMC Sierra
- Electrical faults in the solenoid circuit
- Mechanical issues within the transmission
- Debris or fluid contamination in the transmission system
- Wear and tear on the solenoid valve
- Faulty wiring or connectors
Symptoms of P2808 2016 GMC Sierra
- Erratic shifting patterns
- Harsh gear changes
- Transmission slipping
- Reduced fuel efficiency
- Transmission failure over time
How to Fix P2808 2016 GMC Sierra
- Begin by conducting a thorough diagnostic scan to confirm the P2808 code and identify the specific solenoid valve at fault.
- Inspect the solenoid valve and its wiring for any visible damage or signs of wear. Replace any damaged components as necessary.
- Check for debris or fluid contamination within the transmission system and perform a transmission fluid flush if needed.
- Test the solenoid valve's functionality using a multimeter to ensure it is operating within the specified parameters.
- Clear the DTC and road test the vehicle to verify that the issue has been resolved and that the transmission is functioning properly.
Cost to Fix P2808 2016 GMC Sierra
The typical repair costs for addressing a P2808 code related to a Transmission Control Solenoid Valve 7 stuck off can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost may vary depending on the location, vehicle make and model, and the specific repairs needed. Additionally, diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It's recommended to contact local repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P2808 2016 GMC Sierra code?
Need more information on how to fix the P2808 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2808 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2808 2016 GMC Sierra Code
1. What does the OBDII code P2808 mean on a 2016 GMC Sierra?
The P2808 code indicates that Transmission Control Solenoid Valve 7 is stuck in the "off" position, impairing the transmission's ability to shift properly.
2. What are the common symptoms of code P2808 on a 2016 GMC Sierra?
Symptoms may include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, or the Check Engine Light being illuminated.
3. What causes the P2808 code to appear on a GMC Sierra?
Common causes include a faulty transmission control solenoid, wiring issues, low or dirty transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can driving with the P2808 code damage my GMC Sierra?
Yes, driving with this code can lead to further transmission damage or unsafe driving conditions if the transmission fails to operate correctly.
5. How is the P2808 code diagnosed?
A mechanic will use an OBDII scanner to confirm the code, inspect the wiring and connectors, check the transmission fluid condition, and test the solenoid's functionality.
6. How do I fix the P2808 code on my 2016 GMC Sierra?
Repairs may involve replacing the faulty solenoid, repairing damaged wiring, cleaning or replacing the transmission fluid, or reprogramming the TCM if necessary.
7. How much does it cost to repair the P2808 code on a GMC Sierra?
The repair cost can range from $150 to $500, depending on whether the solenoid or other components need replacement and the labor involved.
8. Can low transmission fluid cause the P2808 code on a GMC Sierra?
Yes, low or dirty transmission fluid can cause solenoid issues, leading to the P2808 code.
9. Is the P2808 code specific to GMC vehicles?
No, the P2808 code can appear on other vehicles with similar transmission systems, but its diagnosis and repair may vary by make and model.
10. How can I prevent the P2808 code from occurring again?
Regular maintenance, including timely transmission fluid changes and inspections of wiring and connectors, can help prevent this issue.
Discuss the causes and fixes for P2808 2016 GMC Sierra OBDII Code
Code P2808 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.