Engine-Codes.com
Engine-Codes – Toyota – P2808 2014 Toyota RAV4

P2808 2014 Toyota RAV4 Code - Pressure Control Solenoid 'G' Performance

Quick Answer

The P2808 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 refers to an issue with the Pressure Control Solenoid 'G'. Common causes include Faulty Pressure Control Solenoid 'G', Electrical issues within the solenoid circuit, Mechanical problems with the solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2808 2014 Toyota RAV4 indicates Pressure Control Solenoid 'G' Performance.
Common causes
Common causes include Faulty Pressure Control Solenoid 'G', Electrical issues within the solenoid circuit, Mechanical problems with the solenoid valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 19, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2808 2014 Toyota RAV4 Description

The P2808 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 refers to an issue with the Pressure Control Solenoid 'G'. This solenoid is a crucial component of the vehicle's transmission system, responsible for regulating the hydraulic pressure within the transmission. When the PCM (powertrain control module) detects that the performance of the Pressure Control Solenoid 'G' is outside of the expected range, it triggers this code.

OBDII Code P2808 2014 Toyota RAV4 - Pressure Control Solenoid 'G' Performance
P2808 2014 Toyota RAV4 Code - Pressure Control Solenoid 'G' Performance

Common Causes of P2808 2014 Toyota RAV4

  1. Faulty Pressure Control Solenoid 'G'
  2. Electrical issues within the solenoid circuit
  3. Mechanical problems with the solenoid valve
  4. Wiring harness issues
  5. Low transmission fluid levels

Symptoms of P2808 2014 Toyota RAV4

  1. Erratic shifting patterns
  2. Harsh or delayed shifts
  3. Transmission slipping
  4. Decreased fuel efficiency
  5. Illumination of the Check Engine Light

How to Fix P2808 2014 Toyota RAV4

  1. Diagnose the specific cause of the issue by performing a thorough inspection of the Pressure Control Solenoid 'G' and related components.
  2. Replace the faulty Pressure Control Solenoid 'G' if necessary.
  3. Check and repair any damaged wiring harness or electrical connections.
  4. Verify proper transmission fluid levels and quality, topping up or replacing as needed.
  5. Clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P2808 2014 Toyota RAV4

The typical repair costs for addressing a Pressure Control Solenoid 'G' performance issue can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops. For a more precise estimate, it's recommended to check local rates before proceeding with the repair.

What does this mean?

Tech Notes for P2808 2014 Toyota RAV4

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

Need more information about the P2808 2014 Toyota RAV4 code?

Need more information on how to fix the P2808 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2808 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2808 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2808 in a 2014 Toyota RAV4?

- Common symptoms include harsh shifting, transmission slipping, decreased fuel efficiency, and the vehicle going into limp mode.

2. What does the OBDII code P2808 for Pressure Control Solenoid 'G' Performance indicate in a 2014 Toyota RAV4?

- This code indicates that there is a performance issue with the pressure control solenoid 'G' in the transmission.

3. What are some possible causes of OBDII code P2808 in a 2014 Toyota RAV4?

- Potential causes include a faulty pressure control solenoid 'G', low transmission fluid levels, a clogged transmission filter, or a damaged transmission.

4. How serious is OBDII code P2808 in a 2014 Toyota RAV4?

- This code can lead to serious transmission issues if left unresolved, potentially causing further damage and costly repairs.

5. How can I diagnose OBDII code P2808 in my 2014 Toyota RAV4?

- Diagnosing this code typically involves using a scan tool to check for other related trouble codes, inspecting the transmission fluid level and condition, and testing the pressure control solenoid 'G'.

6. Can I drive my 2014 Toyota RAV4 with OBDII code P2808?

- It is not recommended to drive the vehicle with this code present, as it can lead to further damage to the transmission.

7. How can I repair OBDII code P2808 in my 2014 Toyota RAV4?

- Repair options may include replacing the pressure control solenoid 'G', addressing any underlying transmission issues, and ensuring proper transmission fluid levels and quality.

8. Is it possible to reset OBDII code P2808 in a 2014 Toyota RAV4 without fixing the underlying issue?

- While you can clear the code temporarily, it is crucial to address the root cause of the problem to prevent further transmission damage.

9. How much does it typically cost to repair OBDII code P2808 in a 2014 Toyota RAV4?

- The cost of repair can vary depending on the specific issue, but it may range from a couple of hundred dollars for solenoid replacement to over a thousand dollars for more extensive transmission repairs.

10. Can a DIY enthusiast fix OBDII code P2808 in a 2014 Toyota RAV4?

- While some simple tasks like checking and topping up transmission fluid can be DIY-friendly, diagnosing and replacing the pressure control solenoid 'G' may require specialized tools and expertise, making it best left to professionals.

Discuss the causes and fixes for P2808 2014 Toyota RAV4 OBDII Code

Submit a New Comment

Code P2808 2014 Toyota RAV4 comments

No comments found for this page.