P27AD 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 7 Calibration Incorrect
Quick Answer
The P27AD diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that the Transmission Control Solenoid Valve 7 Calibration is Incorrect. Common causes include Faulty transmission control solenoid valve 7, Electrical issues in the transmission control module, Poor connections or wiring issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P27AD 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 7 Calibration Incorrect.
- Common causes
- Common causes include Faulty transmission control solenoid valve 7, Electrical issues in the transmission control module, Poor connections or wiring issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P27AD 2014 Chevrolet Silverado Description
The P27AD diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that the Transmission Control Solenoid Valve 7 Calibration is Incorrect. This code specifically points to a problem with the calibration of the transmission control solenoid valve 7, which is responsible for regulating the flow of transmission fluid in the transmission system. The calibration being incorrect means that the valve is not operating within the specified parameters set by the manufacturer, which can lead to various issues with the transmission's performance.
Common Causes of P27AD 2014 Chevrolet Silverado
- Faulty transmission control solenoid valve 7
- Electrical issues in the transmission control module
- Poor connections or wiring issues
- Low transmission fluid levels or dirty fluid
- Mechanical issues within the transmission system
Symptoms of P27AD 2014 Chevrolet Silverado
- Erratic shifting patterns
- Harsh shifts
- Delayed engagement
- Transmission slippage
How to Fix P27AD 2014 Chevrolet Silverado
- Diagnose the specific cause of the incorrect calibration by using a scan tool to read the transmission control module data.
- Inspect the transmission control solenoid valve 7 for any signs of damage or wear and replace if necessary.
- Check the wiring and connections related to the transmission control solenoid valve for any faults or corrosion and repair as needed.
- Perform a transmission fluid flush and refill if the fluid is dirty or low.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P27AD 2014 Chevrolet Silverado
The typical repair costs for addressing a P27AD code on a 2014 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to inquire about local rates to get a more accurate estimate for this repair.
Need more information about the P27AD 2014 Chevrolet Silverado code?
Need more information on how to fix the P27AD 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P27AD 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P27AD 2014 Chevrolet Silverado Code
1. What does the OBDII code P27AD mean on a 2014 Chevrolet Silverado?
The P27AD code indicates that the Transmission Control Module (TCM) has detected an issue with the calibration of solenoid valve 7 in the transmission.
2. What are the symptoms of the P27AD code in a 2014 Chevrolet Silverado?
Common symptoms include erratic shifting, transmission slipping, failure to shift into specific gears, or the transmission going into limp mode.
3. What causes the P27AD code to appear?
Causes can include a faulty solenoid valve, incorrect solenoid calibration, wiring or connector issues, or a malfunctioning Transmission Control Module (TCM).
4. Can a dirty transmission fluid cause the P27AD code?
Yes, contaminated or degraded transmission fluid can affect solenoid performance and may trigger this code.
5. How is the P27AD code diagnosed on a 2014 Chevrolet Silverado?
A technician will use a scan tool to verify the code, inspect the transmission wiring and connectors, check solenoid operation, and possibly perform a fluid analysis or reprogram the TCM.
6. Can I drive my 2014 Chevrolet Silverado with the P27AD code?
Driving with this code is not recommended, as it can lead to further transmission damage or unsafe driving conditions.
7. How much does it cost to fix the P27AD code?
Repair costs vary but could range from $150 to $1,200 depending on whether the issue is with the solenoid, wiring, fluid, or TCM.
8. Can resetting the TCM fix the P27AD code?
A TCM reset may clear the code temporarily, but the underlying issue must be addressed to prevent the code from returning.
9. What tools are needed to repair the P27AD code?
A scan tool, multimeter, and possibly specialized transmission diagnostic equipment are required to diagnose and repair this issue.
10. Is the P27AD code a common problem for the 2014 Chevrolet Silverado?
It’s not extremely common but can occur in vehicles with higher mileage or those that haven’t had regular transmission maintenance.
Discuss the causes and fixes for P27AD 2014 Chevrolet Silverado OBDII Code
Code P27AD 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.