P27A8 2016 GMC Sierra Code - Transmission Control Solenoid Valve 2 Calibration Incorrect
Quick Answer
The P27A8 diagnostic trouble code (DTC) indicates that the Transmission Control Solenoid Valve 2 calibration is incorrect in a 2016 GMC Sierra. Common causes include Faulty Transmission Control Solenoid Valve 2, Wiring or connector issues, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P27A8 2016 GMC Sierra indicates Transmission Control Solenoid Valve 2 Calibration Incorrect.
- Common causes
- Common causes include Faulty Transmission Control Solenoid Valve 2, Wiring or connector issues, Low transmission fluid levels.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P27A8 2016 GMC Sierra Description
The P27A8 diagnostic trouble code (DTC) indicates that the Transmission Control Solenoid Valve 2 calibration is incorrect in a 2016 GMC Sierra. The Transmission Control Solenoid Valve is a crucial component of the vehicle's transmission system responsible for regulating the flow of transmission fluid. When the calibration of this solenoid valve is incorrect, it can lead to various issues with the transmission's performance.
Common Causes of P27A8 2016 GMC Sierra
- Faulty Transmission Control Solenoid Valve 2
- Wiring or connector issues
- Low transmission fluid levels
- Internal transmission component failure
- Software or calibration errors in the TCM
Symptoms of P27A8 2016 GMC Sierra
- Harsh or delayed shifting
- Transmission slipping
- Decreased fuel efficiency
- Transmission overheating
- Illumination of the Check Engine Light
How to Fix P27A8 2016 GMC Sierra
- Perform a thorough diagnostic scan to confirm the P27A8 code and identify the specific issue with the Transmission Control Solenoid Valve 2.
- Inspect the wiring and connectors associated with the solenoid valve for any damage or corrosion.
- Check the transmission fluid level and condition, topping up or replacing as necessary.
- Test the Transmission Control Solenoid Valve 2 for proper operation and replace if faulty.
- Reset the TCM and recalibrate the solenoid valve to ensure proper functioning.
Cost to Fix P27A8 2016 GMC Sierra
The typical repair costs for addressing a P27A8 code related to the Transmission Control Solenoid Valve 2 calibration incorrect can range from $200 to $500, including parts and labor. However, specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to inquire about local rates for a more accurate estimate.
Need more information about the P27A8 2016 GMC Sierra code?
Need more information on how to fix the P27A8 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P27A8 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P27A8 2016 GMC Sierra Code
1. What does OBDII code P27A8 mean on a 2016 GMC Sierra?
P27A8 indicates that the Transmission Control Module (TCM) has detected an issue with the calibration of Transmission Control Solenoid Valve 2, which may cause shifting problems.
2. What are the common symptoms of code P27A8 in a 2016 GMC Sierra?
Common symptoms include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, or the check engine light being illuminated.
3. What causes the P27A8 code to appear?
The code can be triggered by issues such as a faulty transmission solenoid, incorrect TCM programming, wiring problems, or internal transmission damage.
4. Can I drive my 2016 GMC Sierra with a P27A8 code?
While driving may still be possible, it’s not recommended as it could lead to further transmission damage or unsafe driving conditions.
5. How is the P27A8 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the transmission solenoid and wiring, and check the TCM for any software issues or calibration errors.
6. What repairs are needed to fix the P27A8 code?
Repairs may include reprogramming or updating the TCM, replacing the faulty solenoid, repairing damaged wiring, or addressing internal transmission issues.
7. How much does it cost to fix a P27A8 code on a GMC Sierra?
Repair costs can vary, but replacing a solenoid typically costs between $150 and $400, while TCM reprogramming or updates may cost around $100 to $200.
8. Can a P27A8 code be caused by low transmission fluid?
Yes, low or contaminated transmission fluid can affect solenoid performance and potentially trigger the P27A8 code.
9. How can I prevent the P27A8 code from recurring?
Regular maintenance, including checking transmission fluid levels and scheduling software updates for the TCM, can help prevent this issue.
10. Does the P27A8 code require reprogramming the TCM?
In some cases, reprogramming or recalibrating the TCM may be necessary to resolve the calibration issue causing the P27A8 code.
Discuss the causes and fixes for P27A8 2016 GMC Sierra OBDII Code
Code P27A8 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.