P27A8 2014 GMC Sierra Code - Transmission Control Solenoid Valve 2 Calibration Incorrect
Quick Answer
The P27A8 diagnostic trouble code (DTC) for the 2014 GMC Sierra specifically indicates that there is an issue with the Transmission Control Solenoid Valve 2 Calibration being incorrect. Common causes include Faulty solenoid valve: The Transmission Control Solenoid Valve 2 may be defective or worn out, causing calibration issues, Electrical issues: Wiring harness or connection problems can disrupt the communication between the ECM and the solenoid valve, Software malfunction: Software glitches or errors in the transmission control module can result in incorrect calibration readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P27A8 2014 GMC Sierra indicates Transmission Control Solenoid Valve 2 Calibration Incorrect.
- Common causes
- Common causes include Faulty solenoid valve: The Transmission Control Solenoid Valve 2 may be defective or worn out, causing calibration issues, Electrical issues: Wiring harness or connection problems can disrupt the communication between the ECM and the solenoid valve, Software malfunction: Software glitches or errors in the transmission control module can result in incorrect calibration readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P27A8 2014 GMC Sierra Description
The P27A8 diagnostic trouble code (DTC) for the 2014 GMC Sierra specifically indicates that there is an issue with the Transmission Control Solenoid Valve 2 Calibration being incorrect. This solenoid valve is an essential component of the transmission system, responsible for regulating the flow of transmission fluid to control gear shifting. When the calibration of this solenoid valve is incorrect, it can lead to erratic or improper gear shifts, causing the vehicle's transmission to malfunction.
Common Causes of P27A8 2014 GMC Sierra
- Faulty solenoid valve: The Transmission Control Solenoid Valve 2 may be defective or worn out, causing calibration issues.
- Electrical issues: Wiring harness or connection problems can disrupt the communication between the ECM and the solenoid valve.
- Software malfunction: Software glitches or errors in the transmission control module can result in incorrect calibration readings.
- Fluid contamination: Contaminated transmission fluid can affect the performance of the solenoid valve and lead to calibration errors.
- Mechanical damage: Damage to the transmission system, such as worn gears or bearings, can impact the calibration of the solenoid valve.
Symptoms of P27A8 2014 GMC Sierra
- Erratic shifting: The vehicle may experience abrupt or delayed gear shifts, making driving unpredictable and potentially unsafe.
- Transmission slipping: The transmission may slip out of gear or struggle to maintain the correct gear, resulting in poor acceleration and reduced power.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard to indicate a fault in the transmission system.
- Reduced fuel efficiency: Incorrect calibration of the solenoid valve can lead to increased fuel consumption due to inefficient gear shifts.
- Transmission overheating: The transmission may overheat due to the additional strain caused by the incorrect calibration, leading to potential damage to internal components.
How to Fix P27A8 2014 GMC Sierra
- Diagnostic scan: Use a diagnostic scan tool to retrieve the trouble code and identify the specific issue with the Transmission Control Solenoid Valve 2.
- Check wiring and connections: Inspect the wiring harness and connections related to the solenoid valve for any damage or loose connections.
- Test solenoid valve: Test the functionality of the Transmission Control Solenoid Valve 2 to determine if it is faulty and needs replacement.
- Replace solenoid valve: If the solenoid valve is found to be defective, replace it with a new one and recalibrate it to ensure proper operation.
- Reset ECM: Clear the DTC from the ECM and reset the transmission control module to ensure the calibration is correct and the issue is resolved.
Cost to Fix P27A8 2014 GMC Sierra
The cost of repairing the Transmission Control Solenoid Valve 2 calibration issue can vary depending on the specific cause of the problem and the labor rates in your area. Generally, the cost of replacing a solenoid valve can range from $150 to $300, not including labor costs. Factoring in labor rates of $80 to $150 per hour, the total repair cost can range from $250 to $500. Additional costs may apply if other components need to be replaced or if there are underlying transmission issues that require attention. It is advisable to consult with a professional mechanic or auto repair shop for a more accurate cost estimate based on your vehicle's make and model.
Need more information about the P27A8 2014 GMC Sierra code?
Need more information on how to fix the P27A8 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P27A8 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P27A8 2014 GMC Sierra Code
1. What does the OBDII code P27A8 mean for a 2014 GMC Sierra?
The P27A8 code indicates that the Transmission Control Module (TCM) has detected an issue with the calibration of Transmission Control Solenoid Valve 2.
2. What are the common symptoms of the P27A8 code in a 2014 GMC Sierra?
Symptoms may include erratic shifting, transmission slipping, reduced fuel efficiency, or the vehicle entering "limp" mode.
3. What causes the P27A8 code to appear on a 2014 GMC Sierra?
This code can be caused by issues such as a faulty solenoid valve, outdated TCM software, damaged wiring, or low transmission fluid levels.
4. Can I drive my 2014 GMC Sierra with the P27A8 code?
It is not recommended to drive the vehicle for an extended period, as it may cause further damage to the transmission or leave you stranded.
5. How can I fix the P27A8 code on my 2014 GMC Sierra?
Repairs may include updating the TCM software, replacing the faulty solenoid valve, inspecting and repairing wiring, or ensuring proper transmission fluid levels.
6. How is the P27A8 code diagnosed on a 2014 GMC Sierra?
A technician will use a scan tool to verify the code, check transmission fluid levels, inspect wiring and connections, and test the solenoid and TCM.
7. What is a Transmission Control Solenoid Valve?
The solenoid valve controls the flow of transmission fluid to manage gear shifts and ensure proper transmission operation.
8. Can low transmission fluid trigger the P27A8 code?
Yes, low or contaminated transmission fluid can contribute to solenoid calibration issues, potentially triggering the P27A8 code.
9. Does the P27A8 code require TCM reprogramming?
In some cases, reprogramming or updating the TCM software may resolve the issue if it is related to calibration errors.
10. What is the cost to repair the P27A8 code on a 2014 GMC Sierra?
Repair costs can vary but may range from $150 to $500 depending on whether it involves software updates, solenoid replacement, or wiring repairs.
Discuss the causes and fixes for P27A8 2014 GMC Sierra OBDII Code
Code P27A8 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.