P2768 Dodge Code - Input/Turbine Speed Sensor 'B' Circuit Intermittent
Quick Answer
The P2768 diagnostic trouble code (DTC) for Dodge vehicles refers to the Input/Turbine Speed Sensor 'B' Circuit Intermittent. Common causes include Faulty input or turbine speed sensor, Wiring or connector issues in the sensor circuit, Corroded or damaged sensor connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2768 Dodge indicates Input/Turbine Speed Sensor 'B' Circuit Intermittent.
- Common causes
- Common causes include Faulty input or turbine speed sensor, Wiring or connector issues in the sensor circuit, Corroded or damaged sensor connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2768 Dodge Description
The P2768 diagnostic trouble code (DTC) for Dodge vehicles refers to the Input/Turbine Speed Sensor 'B' Circuit Intermittent. This code indicates that there is a problem with the input or turbine speed sensor circuit in the transmission. The input speed sensor helps the vehicle's computer monitor the speed of the input shaft into the transmission, while the turbine speed sensor monitors the speed of the turbine shaft inside the transmission.
Common Causes of P2768 Dodge
- Faulty input or turbine speed sensor
- Wiring or connector issues in the sensor circuit
- Corroded or damaged sensor connectors
- Low transmission fluid level
- Internal transmission issues
Symptoms of P2768 Dodge
- Harsh shifting or delayed shifting
- Transmission slipping
- Check Engine Light illuminated
- Decreased fuel efficiency
- Transmission overheating
How to Fix P2768 Dodge
- Begin by performing a visual inspection of the input/turbine speed sensor and its wiring for any visible damage or corrosion.
- Check the transmission fluid level and condition, topping off or replacing as needed.
- Test the input/turbine speed sensor using a multimeter to ensure it is functioning properly.
- Replace the input/turbine speed sensor if it is found to be faulty.
- Clear the DTC from the vehicle's computer and test drive to ensure the issue has been resolved.
Cost to Fix P2768 Dodge
The typical repair costs for addressing a P2768 DTC in a Dodge vehicle can vary depending on the exact cause of the issue. In general, the cost for parts such as a new input/turbine speed sensor can range from $50 to $150, while labor costs can range from $100 to $200. This brings the total estimated cost to around $150 to $350. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.
Need more information about the P2768 Dodge code?
Need more information on how to fix the P2768 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2768 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2768 Dodge Code
What does the OBDII code P2768 mean on a Dodge vehicle?
The P2768 code indicates an intermittent issue with the Input/Turbine Speed Sensor "B" circuit, which monitors the rotational speed of the transmission input shaft.
What are the common symptoms of the P2768 code?
Common symptoms include erratic shifting, transmission slipping, reduced fuel efficiency, and the illumination of the check engine light.
What causes the P2768 code to appear?
Possible causes include a faulty input/turbine speed sensor, damaged or corroded wiring, poor electrical connections, or issues with the transmission control module (TCM).
Can I drive my Dodge with the P2768 code active?
Driving with this code is not recommended, as it can lead to further transmission issues and unsafe driving conditions due to erratic shifting.
How do I diagnose the P2768 code?
Diagnosis involves checking the sensor, inspecting the wiring and connectors for damage, and testing the circuit for proper voltage and resistance using a multimeter.
How do I fix the P2768 code on my Dodge?
Repairs may include replacing the faulty input/turbine speed sensor, repairing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the TCM if necessary.
How much does it cost to repair the P2768 code?
Repair costs can range from $100 to $300 for sensor replacement, with higher costs if wiring or TCM repairs are required.
Can a low transmission fluid level cause the P2768 code?
While low transmission fluid typically does not directly trigger this code, it can cause transmission performance issues that may indirectly contribute to sensor malfunctions.
What tools are needed to troubleshoot the P2768 code?
You’ll need an OBDII scanner, a multimeter for testing the circuit, and potentially basic hand tools for accessing and replacing components.
Will clearing the P2768 code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the issue will likely return unless the underlying problem is resolved.
Discuss the causes and fixes for P2768 Dodge OBDII Code
Code P2768 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.