P2767 Dodge Code - Input Speed Sensor 2 Circuit No Signal
Quick Answer
The P2767 code for Dodge vehicles indicates a problem with the Input Speed Sensor 2 Circuit, specifically that there is no signal being detected. Common causes include Faulty input speed sensor 2, Damaged wiring or connectors in the input speed sensor circuit, Corrosion or debris blocking the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2767 Dodge indicates Input Speed Sensor 2 Circuit No Signal.
- Common causes
- Common causes include Faulty input speed sensor 2, Damaged wiring or connectors in the input speed sensor circuit, Corrosion or debris blocking the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2767 Dodge Description
The P2767 code for Dodge vehicles indicates a problem with the Input Speed Sensor 2 Circuit, specifically that there is no signal being detected. The input speed sensor is a crucial component of the vehicle's transmission system, responsible for monitoring the speed of the input shaft. This information is used by the Transmission Control Module (TCM) to determine the appropriate gear shift points and optimize performance.
Common Causes of P2767 Dodge
- Faulty input speed sensor 2
- Damaged wiring or connectors in the input speed sensor circuit
- Corrosion or debris blocking the sensor
- Issues with the TCM
- Electrical problems in the transmission system
Symptoms of P2767 Dodge
- Erratic shifting behavior
- Harsh gear changes
- Transmission slipping
- Vehicle going into "limp mode"
- Check Engine Light illuminated
How to Fix P2767 Dodge
- Begin by diagnosing the issue using a scan tool to confirm the P2767 code and identify the specific cause.
- Inspect the input speed sensor 2 and its wiring for any visible damage, corrosion, or loose connections. Replace the sensor if necessary.
- Clear the fault codes and reset the TCM to see if the issue persists.
- Test drive the vehicle to ensure that the transmission is operating smoothly and that the code does not return.
- If the problem persists, further diagnostics may be required to pinpoint the exact cause, such as testing the TCM or conducting a thorough inspection of the transmission system.
Cost to Fix P2767 Dodge
The cost of repairing a P2767 code for Dodge vehicles can vary depending on the specific cause of the issue. In general, replacing the input speed sensor 2 and addressing any related wiring or connector issues can range from $200 to $500, including parts and labor. However, additional diagnostic time may be needed to identify the root cause of the problem, which can increase the overall repair cost. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary between different service providers and locations.
When is the Code Detected?
Need more information about the P2767 Dodge code?
Need more information on how to fix the P2767 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2767 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2767 Dodge Code
1. What does the OBDII code P2767 mean on a Dodge vehicle?
The P2767 code indicates that the Input Speed Sensor 2 Circuit is not sending a signal to the vehicle's powertrain control module (PCM).
2. What are the common symptoms of the P2767 code on a Dodge?
Symptoms may include poor acceleration, harsh or erratic shifting, the transmission going into limp mode, or an illuminated check engine light.
3. What causes the P2767 code to appear on a Dodge?
Common causes include a faulty input speed sensor, damaged or corroded wiring, loose electrical connections, or a malfunctioning PCM.
4. Can I drive my Dodge with the P2767 code active?
Driving with the P2767 code is not recommended, as transmission performance issues can worsen and potentially cause further damage.
5. How do I diagnose the P2767 code on a Dodge?
Diagnosis involves inspecting the speed sensor and its wiring for damage, testing the sensor with a multimeter, and checking for proper voltage and continuity in the circuit.
6. How do I fix the P2767 code on a Dodge?
Repairs may include replacing the input speed sensor, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming or replacing the PCM if necessary.
7. Where is the Input Speed Sensor 2 located on a Dodge vehicle?
The Input Speed Sensor 2 is typically located on the transmission housing, near the input shaft.
8. How much does it cost to fix the P2767 code on a Dodge?
Repair costs can range from $100 to $300 for sensor replacement, while wiring or PCM repairs may cost more depending on the severity of the issue.
9. Can a failing Input Speed Sensor damage my Dodge's transmission?
Yes, a failing sensor can cause erratic shifting and increased wear on the transmission, potentially leading to more severe damage over time.
10. Will clearing the P2767 code fix the problem on my Dodge?
Clearing the code will remove the warning temporarily, but the underlying issue must be fixed to prevent the code from reappearing.
Discuss the causes and fixes for P2767 Dodge OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.