P2746 Dodge Code - Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance
Quick Answer
The P2746 diagnostic trouble code (DTC) for Dodge vehicles refers to the Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance issue. Common causes include Faulty intermediate shaft speed sensor, The sensor itself may be defective or damaged, causing it to send incorrect signals to the TCM, Wiring issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2746 Dodge indicates Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance.
- Common causes
- Common causes include Faulty intermediate shaft speed sensor, The sensor itself may be defective or damaged, causing it to send incorrect signals to the TCM, Wiring issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2746 Dodge Description
The P2746 diagnostic trouble code (DTC) for Dodge vehicles refers to the Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance issue. This code typically indicates a problem with the intermediate shaft speed sensor, which is responsible for monitoring the speed of the intermediate shaft in the transmission. The sensor detects the rotational speed of the intermediate shaft and sends this information to the transmission control module (TCM) to ensure smooth shifting and optimal performance of the transmission.
Common Causes of P2746 Dodge
- Faulty intermediate shaft speed sensor - The sensor itself may be defective or damaged, causing it to send incorrect signals to the TCM.
- Wiring issues - Loose connections, damaged wiring, or corroded terminals can disrupt the communication between the sensor and the TCM.
- Sensor alignment - Improper installation or misalignment of the sensor can affect its accuracy and performance.
- TCM software malfunction - A glitch in the transmission control module's software can also trigger the P2746 code.
Symptoms of P2746 Dodge
- Erratic shifting - The vehicle may experience abrupt or delayed gear shifts, resulting in a jerky or rough driving experience.
- Hesitation during acceleration - The vehicle may struggle to accelerate smoothly, especially when going from a stop or when trying to pick up speed quickly.
- Decreased fuel efficiency - A malfunctioning speed sensor can lead to inefficient transmission operation, causing the vehicle to consume more fuel than usual.
- Illuminated check engine light - The P2746 code triggers the check engine light to come on, indicating a problem with the intermediate shaft speed sensor 'B' circuit.
How to Fix P2746 Dodge
- Diagnostic scan - Use an OBD-II scanner to retrieve the fault code and perform a thorough diagnosis to pinpoint the exact cause of the issue.
- Inspect sensor and wiring - Check the intermediate shaft speed sensor and its wiring for any signs of damage, corrosion, or misalignment.
- Replace sensor - If the sensor is faulty, replace it with a new one that is compatible with the vehicle's make and model.
- Repair wiring - Repair or replace any damaged wiring or connectors to ensure a secure and reliable connection between the sensor and the TCM.
- Clear codes and test drive - Clear the fault codes from the vehicle's computer system and take the vehicle for a test drive to verify that the issue has been resolved.
Cost to Fix P2746 Dodge
The typical repair costs for addressing the P2746 code on a Dodge vehicle can vary depending on the specific model, year, and extent of the issue. On average, the parts required for this repair, such as the intermediate shaft speed sensor, may cost between $50 and $150. The labor costs for diagnosing the problem, replacing the sensor, and conducting the necessary repairs can range from $150 to $300. Overall, the total repair cost for resolving the Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance issue could amount to approximately $200 to $450. It is essential to note that these estimates are general guidelines, and actual costs may vary based on individual factors such as location, mechanic rates, and additional repairs or services needed. It is advisable to consult with a qualified automotive technician or repair shop to receive a more accurate cost estimate for addressing this specific issue.
Need more information about the P2746 Dodge code?
Need more information on how to fix the P2746 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2746 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2746 Dodge Code
What does OBDII code P2746 mean for a Dodge vehicle?
P2746 indicates a problem with the Intermediate Shaft Speed Sensor 'B' circuit, specifically a range or performance issue.
What are the common symptoms of code P2746 in a Dodge?
Symptoms may include erratic or delayed shifting, transmission slipping, poor acceleration, or the Check Engine Light being illuminated.
What causes code P2746 on Dodge vehicles?
Common causes include a faulty Intermediate Shaft Speed Sensor, damaged wiring or connectors, transmission fluid issues, or a malfunctioning transmission control module (TCM).
How can I diagnose code P2746 on my Dodge?
Start by checking the wiring and connectors for damage, inspecting the sensor for faults, and verifying transmission fluid condition and level. A scan tool can help monitor sensor data for irregularities.
Can I drive my Dodge with code P2746 active?
Driving with this code may cause transmission performance issues, potentially leading to further damage. It’s recommended to address the problem promptly.
How do I fix code P2746 on a Dodge vehicle?
Repairs typically involve replacing the Intermediate Shaft Speed Sensor, fixing damaged wiring or connectors, or addressing transmission fluid issues.
Is code P2746 related to transmission fluid problems?
Yes, dirty or low transmission fluid can impact sensor performance and lead to this code. Check and replace fluid if necessary.
What tools are needed to fix code P2746?
You may need a scan tool for diagnostics, basic hand tools for sensor replacement, and a multimeter to test wiring and electrical circuits.
How much does it cost to repair code P2746 on a Dodge?
Repair costs vary depending on the issue, but sensor replacement typically ranges from $100 to $300, including parts and labor.
Can a faulty TCM cause code P2746 in Dodge vehicles?
Yes, a malfunctioning Transmission Control Module can contribute to this code if it fails to interpret sensor data correctly.
Discuss the causes and fixes for P2746 Dodge OBDII Code
Code P2746 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.