P2738 Dodge Code - Pressure Control Solenoid 'F' Control Circuit Low
Quick Answer
The P2738 diagnostic trouble code for Dodge vehicles refers to an issue with the Pressure Control Solenoid 'F' Control Circuit being low. Common causes include Faulty pressure control solenoid 'F', Damaged wiring or connectors in the solenoid circuit, Malfunctioning transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2738 Dodge indicates Pressure Control Solenoid 'F' Control Circuit Low.
- Common causes
- Common causes include Faulty pressure control solenoid 'F', Damaged wiring or connectors in the solenoid circuit, Malfunctioning transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2738 Dodge Description
The P2738 diagnostic trouble code for Dodge vehicles refers to an issue with the Pressure Control Solenoid 'F' Control Circuit being low. This code typically indicates a problem with the transmission system, specifically with the solenoid responsible for regulating hydraulic pressure within the transmission. The pressure control solenoid 'F' plays a crucial role in ensuring smooth shifting of gears and optimal performance of the transmission.
Common Causes of P2738 Dodge
- Faulty pressure control solenoid 'F'
- Damaged wiring or connectors in the solenoid circuit
- Malfunctioning transmission control module
- Low transmission fluid levels
- Electrical issues such as a blown fuse or short circuit
Symptoms of P2738 Dodge
- Harsh or delayed shifting
- Slippage between gears
- Poor acceleration
- Inability to shift gears
- Illumination of the check engine light
How to Fix P2738 Dodge
- Begin by conducting a thorough diagnostic scan to confirm the presence of the P2738 code and identify the specific component causing the issue.
- Inspect the pressure control solenoid 'F' and its wiring for any signs of damage or wear. Replace the solenoid if necessary and repair any damaged wiring or connectors.
- Check the transmission fluid level and condition. Top up the fluid if low and perform a transmission fluid flush if needed.
- Test the transmission control module for any faults or malfunctions. Replace the module if it is deemed to be the cause of the problem.
- Clear the diagnostic trouble codes, reset the vehicle's computer, and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P2738 Dodge
The typical repair costs for addressing the P2738 code can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the cost of replacing a pressure control solenoid 'F' and addressing related electrical issues can range from $200 to $500, including parts and labor. However, it's important to note that diagnosis time and labor rates at auto repair shops can fluctuate based on factors such as location, vehicle make and model, and engine type. Rates may range from $80 to $150 per hour at most repair shops, with higher rates in metropolitan areas or at dealerships and lower rates at independent shops. For a more accurate estimate, it is recommended to inquire with local auto repair facilities.
Need more information about the P2738 Dodge code?
Need more information on how to fix the P2738 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2738 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2738 Dodge Code
1. What does the OBDII code P2738 mean on a Dodge vehicle?
P2738 indicates a problem with the Pressure Control Solenoid 'F' Control Circuit, specifically that it is operating at a low voltage or has an electrical fault.
2. What are the common symptoms of the P2738 code in a Dodge?
Symptoms may include harsh or erratic shifting, transmission slipping, decreased fuel efficiency, or the transmission being stuck in a single gear (limp mode).
3. What causes the P2738 code to appear on a Dodge?
Common causes include a faulty pressure control solenoid, damaged or corroded wiring, a bad transmission control module (TCM), or low transmission fluid levels.
4. Can low transmission fluid trigger the P2738 code?
Yes, low or dirty transmission fluid can affect solenoid performance and may lead to the P2738 code being set.
5. How is the P2738 code diagnosed in a Dodge?
Diagnosis typically involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors for damage, checking transmission fluid levels, and testing the solenoid and TCM for proper function.
6. Can I continue driving my Dodge with the P2738 code?
Driving with this code is not recommended, as it can cause further transmission damage or leave the vehicle stuck in limp mode.
7. How do you fix the P2738 code on a Dodge?
Repairs may include replacing the faulty pressure control solenoid, repairing or replacing damaged wiring, cleaning connectors, or updating/replacing the transmission control module.
8. What tools are needed to fix the P2738 code on a Dodge?
You may need an OBDII scanner, a multimeter for electrical testing, basic hand tools, and possibly a transmission pressure gauge.
9. Is the P2738 code expensive to repair?
Repair costs can vary depending on the cause, but replacing a pressure control solenoid typically ranges from $150 to $400, including labor.
10. Can a software update fix the P2738 code on a Dodge?
In some cases, a TCM software update may resolve the issue if it’s caused by incorrect programming or calibration.
Discuss the causes and fixes for P2738 Dodge OBDII Code
Code P2738 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.