P2738 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 6 Control Circuit Low Voltage
Quick Answer
The P2738 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to a Transmission Control Solenoid Valve 6 Control Circuit Low Voltage. Common causes include Faulty solenoid valve: The transmission control solenoid valve 6 may be defective or damaged, causing low voltage in the circuit, Wiring issues: There may be a short circuit, open circuit, or damaged wiring in the circuit controlling the solenoid valve, ECU malfunction: The Electronic Control Unit (ECU) responsible for regulating the transmission system may be malfunctioning, causing low voltage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2738 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 6 Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty solenoid valve: The transmission control solenoid valve 6 may be defective or damaged, causing low voltage in the circuit, Wiring issues: There may be a short circuit, open circuit, or damaged wiring in the circuit controlling the solenoid valve, ECU malfunction: The Electronic Control Unit (ECU) responsible for regulating the transmission system may be malfunctioning, causing low voltage.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2738 2014 Chevrolet Silverado Description
The P2738 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to a Transmission Control Solenoid Valve 6 Control Circuit Low Voltage. This code indicates that there is an issue with the electrical circuit that controls the transmission control solenoid valve 6. The transmission control solenoid valves are crucial components of the transmission system, responsible for regulating the flow of transmission fluid and controlling gear shifts. In this case, the low voltage in the circuit that controls solenoid valve 6 can lead to improper shifting patterns, erratic transmission behavior, and potential damage to the transmission system.
Common Causes of P2738 2014 Chevrolet Silverado
- Faulty solenoid valve: The transmission control solenoid valve 6 may be defective or damaged, causing low voltage in the circuit.
- Wiring issues: There may be a short circuit, open circuit, or damaged wiring in the circuit controlling the solenoid valve.
- ECU malfunction: The Electronic Control Unit (ECU) responsible for regulating the transmission system may be malfunctioning, causing low voltage.
- Poor connection: A loose or corroded connection in the circuit can result in low voltage signals to the solenoid valve.
- Fluid contamination: Contaminated transmission fluid can affect the solenoid valve's operation, leading to low voltage issues.
Symptoms of P2738 2014 Chevrolet Silverado
- Erratic shifting: The vehicle may experience abrupt or delayed gear shifts, leading to a jerky driving experience.
- Transmission slipping: The transmission may slip out of gear or struggle to maintain the correct gear, impacting acceleration and overall performance.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard, indicating a fault in the transmission system.
- Reduced fuel efficiency: The vehicle may consume more fuel than usual due to inefficient transmission operation.
- Transmission overheating: The transmission may overheat due to improper fluid flow, leading to potential damage.
How to Fix P2738 2014 Chevrolet Silverado
- Diagnose the issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the transmission control solenoid valve 6 circuit.
- Test the solenoid valve: Check the resistance of the solenoid valve to determine if it is functioning correctly.
- Inspect wiring and connections: Check for any damaged or corroded wiring, connectors, or terminals in the circuit.
- Replace solenoid valve: If the solenoid valve is faulty, replace it with a new one and ensure proper installation.
- Clear codes and test drive: Clear the DTC from the ECU, test drive the vehicle to ensure proper shifting, and monitor for any recurring issues.
Cost to Fix P2738 2014 Chevrolet Silverado
The typical repair costs for addressing a P2738 code on a 2014 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor. Rates may be higher at dealerships or in metropolitan areas, while independent shops often offer lower rates. It's advisable to obtain quotes from local shops for a more accurate estimate.
Need more information about the P2738 2014 Chevrolet Silverado code?
Need more information on how to fix the P2738 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2738 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2738 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P2738 in a 2014 Chevrolet Silverado?
- Common symptoms include rough shifting, transmission slipping, poor fuel economy, and in some cases, the vehicle may go into limp mode.
2. What can cause the OBDII code P2738 to trigger in a 2014 Chevrolet Silverado?
- The code P2738 is usually triggered by a malfunction in the Transmission Control Solenoid Valve 6 Control Circuit, often due to low voltage.
3. How serious is the OBDII code P2738 in a 2014 Chevrolet Silverado?
- While the vehicle may still be operable with this code, it is important to address it promptly to avoid potential damage to the transmission system.
4. How can I diagnose the cause of OBDII code P2738 in my 2014 Chevrolet Silverado?
- Diagnosing this code typically involves checking the wiring and connectors related to Transmission Control Solenoid Valve 6, as well as testing the voltage in the circuit.
5. Can I continue driving my 2014 Chevrolet Silverado with the OBDII code P2738 present?
- It is not recommended to drive the vehicle for an extended period with this code active, as it can lead to further transmission issues.
6. Are there any DIY repair tips for addressing the OBDII code P2738 in a 2014 Chevrolet Silverado?
- DIY repair tips may include checking for loose or damaged wiring, ensuring proper connections, and testing the solenoid valve for functionality.
7. How much does it typically cost to repair the OBDII code P2738 in a 2014 Chevrolet Silverado?
- The cost of repairing this code can vary depending on the exact cause, but it may involve replacing the Transmission Control Solenoid Valve 6 or repairing wiring issues.
8. Can a mechanic easily fix the OBDII code P2738 in a 2014 Chevrolet Silverado?
- A qualified mechanic should be able to diagnose and repair the issue causing the code P2738, ensuring proper functioning of the transmission system.
9. Will resetting the OBDII code P2738 in a 2014 Chevrolet Silverado make it go away permanently?
- Simply resetting the code without addressing the underlying issue will not make it disappear permanently; the root cause of the problem needs to be fixed.
10. Is it possible for the OBDII code P2738 to reappear after being successfully repaired in a 2014 Chevrolet Silverado?
- If the root cause of the code P2738 is not fully resolved during the repair process, there is a possibility for it to reappear, necessitating further diagnostics and repairs.
Discuss the causes and fixes for P2738 2014 Chevrolet Silverado OBDII Code
Code P2738 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.