P2733 Dodge Code - Pressure Control Solenoid 'F' Stuck On
Quick Answer
The P2733 diagnostic trouble code (DTC) is specific to Dodge vehicles and indicates that the Pressure Control Solenoid 'F' is stuck on. Common causes include Faulty pressure control solenoid 'F', Malfunctioning transmission control module (TCM), Wiring issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2733 Dodge indicates Pressure Control Solenoid 'F' Stuck On.
- Common causes
- Common causes include Faulty pressure control solenoid 'F', Malfunctioning transmission control module (TCM), Wiring issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2733 Dodge Description
The P2733 diagnostic trouble code (DTC) is specific to Dodge vehicles and indicates that the Pressure Control Solenoid 'F' is stuck on. The pressure control solenoid is a crucial component of the transmission system, responsible for regulating hydraulic pressure within the transmission. When the solenoid is stuck in the on position, it can lead to a variety of issues with the transmission's operation.
Common Causes of P2733 Dodge
- Faulty pressure control solenoid 'F'
- Malfunctioning transmission control module (TCM)
- Wiring issues
- Mechanical problems within the transmission
- Electrical faults within the solenoid
Symptoms of P2733 Dodge
- Harsh or delayed shifting
- Erratic transmission behavior
- Poor acceleration
- Reduced fuel efficiency
- Transmission failure to shift gears
How to Fix P2733 Dodge
- Perform a thorough diagnostic scan to confirm the P2733 code and identify any other related issues.
- Inspect the pressure control solenoid 'F' for proper operation and replace if necessary.
- Check the wiring and connections associated with the solenoid for any damage or corrosion.
- Test the transmission control module (TCM) for proper function and replace if deemed faulty.
- Clear the DTC codes, reset the transmission adaptations, and test drive the vehicle to ensure proper operation.
Cost to Fix P2733 Dodge
The typical repair costs for addressing a Pressure Control Solenoid 'F' Stuck On issue can vary depending on the specific vehicle make and model, as well as the extent of the repairs needed. In general, the cost can range from $200 to $500 for parts and labor. However, it's important to note that diagnostic time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle type, and the shop's hourly rates. It's recommended to contact local repair shops for a more accurate estimate.
Need more information about the P2733 Dodge code?
Need more information on how to fix the P2733 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2733 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2733 Dodge Code
1. What does the OBDII code P2733 mean on a Dodge vehicle?
P2733 indicates that the Powertrain Control Module (PCM) has detected that the pressure control solenoid 'F' in the transmission is stuck in the "on" position, causing improper hydraulic pressure.
2. What are the common symptoms of the P2733 code on a Dodge?
Common symptoms include harsh or delayed shifting, slipping gears, transmission overheating, reduced fuel efficiency, and the illumination of the check engine light.
3. What causes the P2733 code to appear on a Dodge?
The code can be triggered by a faulty pressure control solenoid, contaminated or low transmission fluid, wiring or connector issues, or internal transmission damage.
4. Can I drive my Dodge with the P2733 code?
Driving with this code is not recommended as it can lead to further damage to the transmission, increased repair costs, and unsafe driving conditions.
5. How do I diagnose the P2733 code on a Dodge?
Diagnosing involves checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and testing the pressure control solenoid for proper operation.
6. How can I fix the P2733 code on my Dodge vehicle?
Repairs may include replacing the faulty pressure control solenoid, repairing damaged wiring or connectors, flushing and refilling the transmission fluid, or addressing internal transmission issues.
7. How much does it cost to repair a P2733 code on a Dodge?
Repair costs vary depending on the issue but can range from $150 to $400 for solenoid replacement or fluid service. Internal transmission repairs can be significantly more expensive.
8. Can a dirty transmission fluid cause the P2733 code?
Yes, contaminated or degraded transmission fluid can lead to solenoid sticking or malfunction, triggering the P2733 code.
9. What tools are needed to troubleshoot the P2733 code on a Dodge?
You’ll need an OBDII scanner, a multimeter, and basic tools for inspecting wiring and solenoid components. A transmission pressure gauge may also be helpful.
10. Will resetting the check engine light fix the P2733 code?
Resetting the light without addressing the root cause will not fix the issue, and the code is likely to return. Proper diagnosis and repair are necessary.
Discuss the causes and fixes for P2733 Dodge OBDII Code
Code P2733 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.