P2729 2014 GMC Sierra Code - Pressure Control Solenoid Valve 5 Control Circuit Low Voltage
Quick Answer
The P2729 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to the Pressure Control Solenoid Valve 5 Control Circuit Low Voltage. Common causes include Faulty pressure control solenoid valve 5, Damaged or corroded wiring harness, Poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2729 2014 GMC Sierra indicates Pressure Control Solenoid Valve 5 Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty pressure control solenoid valve 5, Damaged or corroded wiring harness, Poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2729 2014 GMC Sierra Description
The P2729 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to the Pressure Control Solenoid Valve 5 Control Circuit Low Voltage. This code indicates that there is an issue with the electrical circuit controlling the pressure control solenoid valve 5, which is responsible for regulating hydraulic pressure within the transmission. The transmission control module (TCM) monitors the voltage signal from the solenoid valve and if it detects that the voltage is lower than expected, it will trigger this code.
Common Causes of P2729 2014 GMC Sierra
- Faulty pressure control solenoid valve 5
- Damaged or corroded wiring harness
- Poor electrical connection
- Issues with the TCM
- Electrical component failure
Symptoms of P2729 2014 GMC Sierra
- Harsh or delayed shifting
- Slipping gears
- Difficulty engaging into gear
- Decreased fuel efficiency
- Decreased acceleration
How to Fix P2729 2014 GMC Sierra
- Begin by conducting a thorough visual inspection of the wiring harness and electrical connectors associated with the pressure control solenoid valve 5.
- Test the pressure control solenoid valve 5 using a multimeter to check for proper resistance and voltage.
- Inspect the TCM for any signs of damage or malfunction, and perform a diagnostic scan to retrieve any additional fault codes.
- If the pressure control solenoid valve 5 is found to be faulty, replace it with a new unit and ensure proper installation.
- Clear the DTCs from the TCM's memory using a diagnostic scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P2729 2014 GMC Sierra
The typical repair costs for addressing the P2729 code can vary depending on the specific cause of the issue and the prices of parts and labor in your area. On average, you can expect to pay between $200 and $500 for parts and labor. It's important to note that the diagnosis time and labor rates at auto repair shops can fluctuate, so it's recommended to obtain quotes from multiple shops to ensure you're getting a fair price for the repair.
Need more information about the P2729 2014 GMC Sierra code?
Need more information on how to fix the P2729 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2729 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2729 2014 GMC Sierra Code
1. What does OBDII code P2729 mean on a 2014 GMC Sierra?
P2729 indicates a problem with the Pressure Control Solenoid Valve 5 control circuit, specifically low voltage, which can affect the transmission's operation.
2. What are the common symptoms of code P2729 in a 2014 GMC Sierra?
Symptoms may include harsh or delayed shifting, slipping gears, transmission overheating, reduced fuel efficiency, or the vehicle entering limp mode.
3. What causes code P2729 in a 2014 GMC Sierra?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors in the control circuit, a malfunctioning transmission control module (TCM), or low transmission fluid.
4. Can low transmission fluid cause code P2729?
Yes, low or contaminated transmission fluid can cause improper solenoid operation, leading to this code.
5. How do I fix code P2729 on my 2014 GMC Sierra?
Repairs may include replacing the faulty solenoid, repairing or replacing damaged wiring or connectors, updating or reprogramming the TCM, or refilling transmission fluid to the correct level.
6. How is code P2729 diagnosed in a 2014 GMC Sierra?
A mechanic will use a scan tool to confirm the code, inspect the transmission wiring and connectors, test the solenoid’s resistance, and check the transmission fluid level and condition.
7. Can driving with code P2729 damage the transmission?
Yes, continuing to drive with this code can cause further damage to the transmission due to improper shifting or overheating.
8. How much does it cost to repair code P2729 in a 2014 GMC Sierra?
Repair costs can range from $200 to $800 or more, depending on whether the solenoid, wiring, or TCM needs replacement.
9. Is code P2729 covered under a powertrain warranty for a 2014 GMC Sierra?
It may be covered if the vehicle is still under a valid powertrain warranty. Check with your GMC dealership for specific warranty coverage.
10. Can a software update fix code P2729 on a 2014 GMC Sierra?
In some cases, a software update for the TCM may resolve the issue if it’s caused by a programming error.
Discuss the causes and fixes for P2729 2014 GMC Sierra OBDII Code
Code P2729 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.