P2720 Dodge Code - Pressure Control Solenoid 'D' Control Circuit Low
Quick Answer
The P2720 diagnostic trouble code (DTC) for Dodge vehicles refers to the Pressure Control Solenoid 'D' Control Circuit Low. Common causes include Faulty pressure control solenoid 'D', Wiring or connector issues in the control circuit, Low transmission fluid levels. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2720 Dodge indicates Pressure Control Solenoid 'D' Control Circuit Low.
- Common causes
- Common causes include Faulty pressure control solenoid 'D', Wiring or connector issues in the control circuit, Low transmission fluid levels.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2720 Dodge Description
The P2720 diagnostic trouble code (DTC) for Dodge vehicles refers to the Pressure Control Solenoid 'D' Control Circuit Low. This code indicates that there is an issue with the control circuit of the pressure control solenoid 'D' in the transmission. The pressure control solenoid is responsible for regulating the hydraulic pressure inside the transmission, which is crucial for proper shifting and overall transmission operation.
Common Causes of P2720 Dodge
- Faulty pressure control solenoid 'D'
- Wiring or connector issues in the control circuit
- Low transmission fluid levels
- Internal transmission damage
- Faulty transmission control module
Symptoms of P2720 Dodge
- Erratic or harsh shifting
- Slipping gears
- Transmission overheating
- Transmission fluid leaks
- Reduced fuel efficiency
How to Fix P2720 Dodge
- Diagnose the issue by using a scan tool to read the DTC and inspecting the pressure control solenoid 'D' and its wiring.
- Check and replenish transmission fluid levels if low.
- Test the pressure control solenoid 'D' for proper function and replace if necessary.
- Inspect and repair any damaged wiring or connectors in the control circuit.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2720 Dodge
The cost of repairing a P2720 code for a Dodge vehicle can vary depending on the specific model, the extent of the issue, and the labor rates at the auto repair shop. Typically, the parts for this repair, such as a new pressure control solenoid 'D', can range from $100 to $300. Labor costs can range from $150 to $300, depending on the shop's hourly rate and the time required for the repair. Overall, the total cost for resolving this issue can be around $250 to $600. It is advisable to contact local auto repair shops for more accurate estimates based on your vehicle's make and model.
Need more information about the P2720 Dodge code?
Need more information on how to fix the P2720 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2720 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2720 Dodge Code
What does the OBDII code P2720 mean on a Dodge?
P2720 indicates that the Powertrain Control Module (PCM) has detected a low electrical signal in the Pressure Control Solenoid 'D' control circuit, which helps manage transmission fluid pressure for proper shifting.
What are the common symptoms of code P2720 in a Dodge?
Symptoms may include harsh or delayed shifting, slipping gears, a decrease in fuel efficiency, transmission overheating, or the illumination of the Check Engine Light.
What causes the P2720 code to appear in a Dodge vehicle?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors in the solenoid circuit, low or dirty transmission fluid, or a malfunctioning PCM.
Can driving with the P2720 code damage my Dodge vehicle?
Yes, continuing to drive with this code can lead to further transmission damage, reduced performance, and higher repair costs if the underlying issue isn't addressed.
How do I diagnose the P2720 code on my Dodge?
Start by checking the transmission fluid level and condition. Then inspect the wiring and connectors for damage. If no issues are found, test the pressure control solenoid and the PCM for proper function.
Is replacing the pressure control solenoid the only fix for code P2720?
No, the issue could also stem from damaged wiring, a faulty PCM, or even dirty transmission fluid, so proper diagnosis is crucial before replacing the solenoid.
How much does it typically cost to fix the P2720 code on a Dodge?
The cost can vary, but replacing a pressure control solenoid typically ranges from $200 to $400, while wiring repairs or PCM replacement can add to the expense.
Can low or dirty transmission fluid cause the P2720 code?
Yes, low or contaminated transmission fluid can affect solenoid operation and trigger this code. Always check and replace the fluid as needed during diagnosis.
What tools do I need to troubleshoot the P2720 code on a Dodge?
You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly a transmission pressure gauge to check solenoid function.
Is it safe to clear the P2720 code without repairs?
Clearing the code without addressing the root cause may temporarily hide the issue, but the underlying problem will likely persist and could worsen over time.
Discuss the causes and fixes for P2720 Dodge OBDII Code
Code P2720 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.