P2719 Dodge Code - Pressure Control Solenoid 'D' Control Circuit Range/Performance
Quick Answer
The P2719 diagnostic trouble code for Dodge vehicles refers to an issue with the Pressure Control Solenoid 'D' Control Circuit Range/Performance. Common causes include Faulty pressure control solenoid 'D', Wiring or electrical connection issues in the control circuit, Low transmission fluid level or dirty fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2719 Dodge indicates Pressure Control Solenoid 'D' Control Circuit Range/Performance.
- Common causes
- Common causes include Faulty pressure control solenoid 'D', Wiring or electrical connection issues in the control circuit, Low transmission fluid level or dirty fluid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2719 Dodge Description
The P2719 diagnostic trouble code for Dodge vehicles refers to an issue with the Pressure Control Solenoid 'D' Control Circuit Range/Performance. This code specifically points to a problem with the electronic circuit that controls the pressure of the transmission fluid in the transmission system. The pressure control solenoid is responsible for regulating the hydraulic pressure within the transmission to ensure smooth and efficient gear shifting. When this solenoid malfunctions or its control circuit experiences issues, it can lead to various transmission problems.
Common Causes of P2719 Dodge
- Faulty pressure control solenoid 'D'
- Wiring or electrical connection issues in the control circuit
- Low transmission fluid level or dirty fluid
- Transmission control module (TCM) malfunction
- Mechanical problems within the transmission
Symptoms of P2719 Dodge
- Erratic shifting behavior
- Delayed gear changes
- Harsh shifting
- Transmission slippage
- Vehicle going into fail-safe mode
How to Fix P2719 Dodge
- Perform a thorough diagnostic scan to confirm the P2719 code and pinpoint the exact cause of the issue.
- Inspect the pressure control solenoid 'D' and its wiring for any signs of damage or wear. Replace the solenoid if necessary.
- Check the transmission fluid level and condition. Top off or replace the fluid as needed.
- Test the transmission control module (TCM) for proper functionality and replace if faulty.
- Clear the code and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2719 Dodge
The cost of repairing the Pressure Control Solenoid 'D' Control Circuit Range/Performance issue can vary depending on the specific cause of the problem and the extent of the repairs needed. On average, the parts for this repair can range from $100 to $300, while labor costs can range from $150 to $400. Overall, the total repair costs for this issue typically fall between $250 and $700. Keep in mind that these estimates are approximate, and actual costs may vary based on the factors mentioned earlier. Be sure to consult with a qualified mechanic or repair shop for a more accurate cost estimate.
Need more information about the P2719 Dodge code?
Need more information on how to fix the P2719 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2719 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2719 Dodge Code
What does OBDII code P2719 mean on a Dodge vehicle?
Code P2719 indicates a problem with the Pressure Control Solenoid 'D' Control Circuit, meaning the solenoid is not operating within its expected range or performance.
What are the common symptoms of code P2719 in a Dodge?
Symptoms may include harsh or erratic shifting, transmission slipping, poor fuel economy, and the Check Engine Light being illuminated.
What causes the P2719 code to appear in a Dodge?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid, or internal transmission issues.
Can low transmission fluid cause code P2719 in a Dodge?
Yes, low or contaminated transmission fluid can disrupt the operation of the pressure control solenoid and trigger this code.
How do you diagnose code P2719 in a Dodge?
Diagnosis typically involves checking the transmission fluid level, inspecting the wiring and connectors for damage, testing the pressure control solenoid, and scanning the transmission control module (TCM) for additional codes.
Is it safe to drive a Dodge with a P2719 code?
It is not recommended to drive for extended periods, as this code can cause shifting issues that may lead to further transmission damage.
How is code P2719 repaired in a Dodge?
Repairs may include replacing the pressure control solenoid, repairing damaged wiring or connectors, flushing and refilling the transmission fluid, or addressing internal transmission problems.
How much does it cost to fix a P2719 code in a Dodge?
Repair costs can vary but typically range from $200 to $800, depending on whether the solenoid needs replacement or if more extensive transmission repairs are required.
Can a faulty TCM cause code P2719 in a Dodge?
Yes, a malfunctioning Transmission Control Module (TCM) can fail to properly control the solenoid, leading to this error code.
What tools are needed to troubleshoot code P2719 in a Dodge?
You’ll need an OBDII scanner, a multimeter to test electrical components, and possibly transmission-specific tools if inspecting or replacing the solenoid.
Discuss the causes and fixes for P2719 Dodge OBDII Code
Code P2719 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.