P2718 GMC Code - Pressure Control Solenoid 4 Control Circuit Open
Quick Answer
The P2718 diagnostic trouble code (DTC) for GMC vehicles refers to a problem with the Pressure Control Solenoid 4 Control Circuit being open. Common causes include Faulty pressure control solenoid 4, Damaged wiring or connectors in the circuit, Malfunctioning TCM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2718 GMC indicates Pressure Control Solenoid 4 Control Circuit Open.
- Common causes
- Common causes include Faulty pressure control solenoid 4, Damaged wiring or connectors in the circuit, Malfunctioning TCM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2718 GMC Description
The P2718 diagnostic trouble code (DTC) for GMC vehicles refers to a problem with the Pressure Control Solenoid 4 Control Circuit being open. This code indicates that there is an issue with the electrical circuit that controls the pressure control solenoid 4, which is responsible for regulating the hydraulic pressure in the transmission. The transmission control module (TCM) uses this solenoid to adjust the pressure to ensure smooth shifting and overall transmission performance.
Common Causes of P2718 GMC
- Faulty pressure control solenoid 4
- Damaged wiring or connectors in the circuit
- Malfunctioning TCM
- Software glitch in the TCM programming
- Electrical issues such as a blown fuse or relay
Symptoms of P2718 GMC
- Harsh or erratic shifting
- Slipping gears
- Delayed engagement
- Transmission going into limp mode
- Illumination of the Check Engine Light
How to Fix P2718 GMC
- Diagnose the issue using a scan tool to confirm the P2718 code and pinpoint the exact cause of the problem.
- Inspect the wiring and connectors in the pressure control solenoid 4 circuit for any damage or corrosion. Repair or replace as necessary.
- Test the pressure control solenoid 4 for proper operation. Replace if found to be faulty.
- Check the TCM for any software updates or glitches. Perform a reflash or reprogram if needed.
- Clear the DTC and test drive the vehicle to ensure that the issue has been resolved and that the transmission is functioning properly.
Cost to Fix P2718 GMC
The typical repair cost for addressing a P2718 code in a GMC vehicle can range from $200 to $500, including parts and labor. However, it's important to note that actual repair costs can vary depending on factors such as the specific model and year of the vehicle, the extent of the damage, and the labor rates at the auto repair shop. Diagnosis time and labor rates can range from $80 to $150 per hour, with rates potentially higher at dealerships or in metropolitan areas. It is advisable to consult with a trusted mechanic or shop to get a more accurate estimate for this repair.
Need more information about the P2718 GMC code?
Need more information on how to fix the P2718 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2718 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P2718 2014 GMC Sierra — Pressure Control Solenoid 4 Control Circuit Open
- P2718 2015 GMC Sierra — Pressure Control Solenoid 4 Control Circuit Open
- P2718 2016 GMC Sierra — Pressure Control Solenoid 4 Control Circuit Open
- P2718 2017 GMC Sierra — Pressure Control Solenoid 4 Control Circuit Open
- P2718 2018 GMC Sierra — Pressure Control Solenoid 4 Control Circuit Open
Frequently Asked Questions about P2718 GMC Code
1. What are the common symptoms of OBDII code P2718 GMC?
The common symptoms of code P2718 include harsh shifting, delayed shifting, transmission slipping, and the transmission going into limp mode.
2. What causes the OBDII code P2718 GMC to appear?
The code P2718 is typically triggered by a malfunction in the Pressure Control Solenoid 4 circuit, often due to a faulty solenoid, wiring issues, or a failed transmission control module.
3. How serious is the OBDII code P2718 GMC?
Code P2718 can lead to drivability issues and potential transmission damage if left unaddressed. It is recommended to address this code promptly to prevent further damage.
4. Can I drive my vehicle with the OBDII code P2718 GMC?
It is not recommended to drive the vehicle with code P2718 present, as it can cause further damage to the transmission. It is best to address the issue as soon as possible.
5. How do I diagnose the OBDII code P2718 GMC?
Diagnosing code P2718 typically involves using a scan tool to retrieve the code, checking the wiring and connections related to the Pressure Control Solenoid 4, and testing the solenoid for proper operation.
6. How can I repair the OBDII code P2718 GMC?
Repairing code P2718 may involve replacing the Pressure Control Solenoid 4, repairing any damaged wiring or connections, or reprogramming the transmission control module.
7. Can a DIYer fix the OBDII code P2718 GMC?
While some DIYers may be able to address code P2718 with the right tools and knowledge, it is recommended to consult a professional mechanic for an accurate diagnosis and repair.
8. How much does it cost to fix the OBDII code P2718 GMC?
The cost of fixing code P2718 can vary depending on the cause of the issue, the necessary repairs, and the labor rates in your area. It is advisable to obtain quotes from different mechanics.
9. Will resetting the OBDII code P2718 GMC make it go away?
Resetting the code may temporarily clear the check engine light, but if the underlying issue causing code P2718 is not addressed, the code is likely to return.
10. How can I prevent the OBDII code P2718 GMC from reappearing?
Regular maintenance of the transmission, such as fluid changes and inspections, can help prevent issues that may trigger code P2718. Addressing any transmission problems promptly can also help prevent the code from reappearing.
Discuss the causes and fixes for P2718 GMC OBDII Code
Code P2718 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.