P2718 2017 Chevrolet Silverado Code - Pressure Control Solenoid 4 Control Circuit Open
Quick Answer
The P2718 diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado refers to a problem with the Pressure Control Solenoid 4 Control Circuit being open. Common causes include Faulty pressure control solenoid 4, Damaged wiring or connectors in the circuit, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2718 2017 Chevrolet Silverado indicates Pressure Control Solenoid 4 Control Circuit Open.
- Common causes
- Common causes include Faulty pressure control solenoid 4, Damaged wiring or connectors in the circuit, Malfunctioning engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2718 2017 Chevrolet Silverado Description
The P2718 diagnostic trouble code (DTC) for a 2017 Chevrolet Silverado refers to a problem with the Pressure Control Solenoid 4 Control Circuit being open. This code indicates that there is an issue with the electrical circuit that controls the pressure control solenoid 4 in the transmission. The pressure control solenoid is responsible for regulating the hydraulic pressure in the transmission, which is crucial for proper gear shifting and overall transmission performance.
Common Causes of P2718 2017 Chevrolet Silverado
- Faulty pressure control solenoid 4
- Damaged wiring or connectors in the circuit
- Malfunctioning engine control module (ECM)
- Transmission fluid leak affecting the circuit
- Corrosion or poor connections in the circuit
Symptoms of P2718 2017 Chevrolet Silverado
- Erratic shifting patterns
- Harsh shifting between gears
- Transmission slipping
- Transmission overheating
- Illumination of the check engine light
How to Fix P2718 2017 Chevrolet Silverado
- Begin by conducting a thorough inspection of the pressure control solenoid 4 and its wiring and connectors.
- Test the solenoid and the circuit using a multimeter to check for continuity and proper voltage.
- Replace the pressure control solenoid 4 if it is found to be faulty.
- Repair or replace any damaged wiring or connectors in the circuit.
- Clear the DTC from the vehicle's ECM and test drive the vehicle to ensure proper transmission operation.
Cost to Fix P2718 2017 Chevrolet Silverado
The typical repair costs for addressing a P2718 code on a 2017 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of replacing a pressure control solenoid can range from $150 to $300, while the cost of labor for diagnosis and repair can range from $80 to $150 per hour. Additional costs may be incurred if wiring or connectors need to be replaced. It is advisable to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate based on the specific circumstances of the vehicle.
Need more information about the P2718 2017 Chevrolet Silverado code?
Need more information on how to fix the P2718 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2718 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2718 2017 Chevrolet Silverado Code
1. What does the OBDII code P2718 mean on a 2017 Chevrolet Silverado?
P2718 indicates an issue with the Pressure Control Solenoid 4 Control Circuit, specifically that the circuit is open or not functioning properly.
2. What are the common symptoms of code P2718 in a 2017 Chevrolet Silverado?
Symptoms may include harsh or erratic shifting, a transmission stuck in one gear, poor fuel efficiency, or the Check Engine Light illuminated.
3. What causes the P2718 code to appear in a 2017 Chevrolet Silverado?
Common causes include a faulty pressure control solenoid, damaged or corroded wiring, a failed transmission control module (TCM), or low transmission fluid.
4. Can I drive my 2017 Chevrolet Silverado with the P2718 code active?
Driving with this code active is not recommended, as it can lead to further transmission damage and unsafe driving conditions.
5. How do I diagnose the P2718 code in my 2017 Chevrolet Silverado?
Diagnosis involves checking the transmission fluid level, inspecting the wiring and connectors for damage, testing the solenoid for proper operation, and using a scan tool to monitor related sensor data.
6. How can I fix the P2718 code on a 2017 Chevrolet Silverado?
Repairs may include replacing the faulty pressure control solenoid, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the TCM.
7. How much does it cost to fix the P2718 code in a 2017 Chevrolet Silverado?
Repair costs depend on the issue but can range from $150 to $400 for solenoid replacement, plus labor and potential diagnostic fees.
8. Can low transmission fluid cause the P2718 code?
Yes, low or dirty transmission fluid can lead to improper solenoid operation, triggering the P2718 code.
9. Will clearing the code fix the P2718 issue permanently?
Clearing the code will reset the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
10. Is the P2718 code a common problem for the 2017 Chevrolet Silverado?
While not extremely common, this code can occur if the transmission system is not properly maintained or if there is a component failure.
Discuss the causes and fixes for P2718 2017 Chevrolet Silverado OBDII Code
Code P2718 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.