Engine-CodesChevrolet – P2714 2016 Chevrolet Silverado

P2714 2016 Chevrolet Silverado Code - Pressure Control Solenoid Valve 4 Stuck Off

Quick Answer

The P2714 diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado indicates a problem with the Pressure Control Solenoid Valve 4 being stuck off. Common causes include Faulty pressure control solenoid valve, Electrical issues such as a short or open circuit, Low transmission fluid levels or dirty fluid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2714 2016 Chevrolet Silverado indicates Pressure Control Solenoid Valve 4 Stuck Off.
Common causes
Common causes include Faulty pressure control solenoid valve, Electrical issues such as a short or open circuit, Low transmission fluid levels or dirty fluid.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2714 2016 Chevrolet Silverado Description

The P2714 diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado indicates a problem with the Pressure Control Solenoid Valve 4 being stuck off. This valve is a crucial component of the transmission system, responsible for regulating the hydraulic pressure within the transmission. When the solenoid valve is stuck off, it means that it is not functioning properly, leading to issues with shifting gears and overall transmission performance.

OBDII Code P2714 2016 Chevrolet Silverado - Pressure Control Solenoid Valve 4 Stuck Off
P2714 2016 Chevrolet Silverado Code - Pressure Control Solenoid Valve 4 Stuck Off

Common Causes of P2714 2016 Chevrolet Silverado

  1. Faulty pressure control solenoid valve
  2. Electrical issues such as a short or open circuit
  3. Low transmission fluid levels or dirty fluid
  4. Mechanical blockage within the valve
  5. Wiring harness issues

Symptoms of P2714 2016 Chevrolet Silverado

  1. Harsh or delayed shifting
  2. Erratic transmission behavior
  3. Transmission slipping
  4. Poor fuel efficiency
  5. Illuminated check engine light

How to Fix P2714 2016 Chevrolet Silverado

  1. Begin by conducting a thorough inspection of the pressure control solenoid valve 4 and its wiring harness to check for any visible damage or blockages.
  2. Test the solenoid valve using a multimeter to determine if it is functioning properly or needs to be replaced.
  3. If the solenoid valve is faulty, remove and replace it with a new one, ensuring proper installation and connection.
  4. Check and replace the transmission fluid if necessary, ensuring it is at the correct level and in good condition.
  5. Clear the DTC from the vehicle's memory using a diagnostic scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P2714 2016 Chevrolet Silverado

The typical repair costs for addressing a P2714 code on a 2016 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, and lower at independent shops. It's recommended to obtain local quotes for a more accurate estimate.

Need more information about the P2714 2016 Chevrolet Silverado code?

Need more information on how to fix the P2714 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2714 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2714 2016 Chevrolet Silverado Code

1. What does the OBDII code P2714 mean on a 2016 Chevrolet Silverado?

P2714 indicates that the Powertrain Control Module (PCM) has detected that Pressure Control Solenoid Valve 4 is stuck in the "off" position, affecting transmission performance.

2. What are the common symptoms of code P2714 in a 2016 Chevrolet Silverado?

Symptoms include harsh or delayed shifting, slipping gears, transmission overheating, reduced fuel efficiency, and the Check Engine Light being illuminated.

3. What causes the P2714 code to appear in a Chevrolet Silverado?

Common causes include a faulty pressure control solenoid, low or dirty transmission fluid, an issue with the transmission valve body, wiring problems, or a malfunctioning PCM.

4. Can driving with a P2714 code damage my 2016 Silverado?

Yes, driving with this code can cause further damage to the transmission, especially if the issue involves low fluid or overheating.

5. How can I diagnose the P2714 code on my Silverado?

Start by checking the transmission fluid level and condition, inspecting solenoid wiring and connectors for damage, and using a diagnostic scanner to monitor solenoid operation.

6. How do I fix the P2714 code on a 2016 Chevrolet Silverado?

Repairs may involve replacing the faulty pressure control solenoid, cleaning or replacing the valve body, changing the transmission fluid and filter, or repairing damaged wiring.

7. Is the P2714 code expensive to fix on a Silverado?

Repair costs vary depending on the cause, but replacing a pressure control solenoid typically costs between $200 and $500, including parts and labor.

8. Can low or dirty transmission fluid trigger the P2714 code?

Yes, insufficient or contaminated transmission fluid can cause solenoid malfunctions, leading to the P2714 code.

9. How do I prevent the P2714 code from recurring?

Regularly maintain your transmission by checking and changing the fluid as recommended, inspecting wiring for damage, and addressing transmission issues promptly.

10. Can a faulty PCM cause the P2714 code in my Silverado?

While less common, a malfunctioning PCM can cause the P2714 code by failing to properly control the solenoid. This should be checked if other fixes don’t resolve the issue.

Discuss the causes and fixes for P2714 2016 Chevrolet Silverado OBDII Code

Code P2714 2016 Chevrolet Silverado comments

No comments found for this page.