Engine-Codes.com
Engine-Codes – GMC – P2670 GMC

P2670 GMC Code - Actuator High Control Circuit Group 2 Low Voltage

Quick Answer

The P2670 GMC code indicates a problem with the Actuator High Control Circuit Group 2, specifically, low voltage being detected. Common causes include Faulty actuator or actuator control module, Wiring issues (shorts, open circuits), Poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2670 GMC indicates Actuator High Control Circuit Group 2 Low Voltage.
Common causes
Common causes include Faulty actuator or actuator control module, Wiring issues (shorts, open circuits), Poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2670 GMC Description

The P2670 GMC code indicates a problem with the Actuator High Control Circuit Group 2, specifically, low voltage being detected. This code is typically found in vehicles with electronic throttle control systems. Essentially, the electronic throttle control system regulates the throttle opening in response to inputs from the accelerator pedal position sensor. The actuator controls the throttle valve opening and closing based on signals from the engine control module (ECM).

OBDII Code P2670 GMC - Actuator High Control Circuit Group 2 Low Voltage
P2670 GMC Code - Actuator High Control Circuit Group 2 Low Voltage

Common Causes of P2670 GMC

  1. Faulty actuator or actuator control module
  2. Wiring issues (shorts, open circuits)
  3. Poor electrical connection
  4. ECM malfunction
  5. Software issues

Symptoms of P2670 GMC

  1. Reduced engine power
  2. Poor acceleration
  3. Engine stalling
  4. Illuminated Check Engine Light
  5. Difficulty maintaining speed

How to Fix P2670 GMC

  1. Begin by scanning the vehicle's ECM to retrieve the fault codes and verify the presence of P2670 GMC.
  2. Inspect the actuator and its control module for any visible damage or signs of malfunction.
  3. Check the wiring harness for any shorts, open circuits, or poor connections. Repair or replace damaged wiring as needed.
  4. Test the actuator control module and replace if necessary.
  5. Clear the fault codes and perform a test drive to ensure the issue has been resolved.

Cost to Fix P2670 GMC

The typical repair costs for addressing the P2670 GMC code can vary depending on the specific cause of the issue. Replacement of the actuator control module or wiring repairs may range from $200 to $500, including parts and labor. However, it is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is recommended to check local rates for a more accurate estimate.

Need more information about the P2670 GMC code?

Need more information on how to fix the P2670 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2670 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2670 GMC Code

1. What are some common symptoms of OBDII code P2670 GMC?

- Common symptoms include rough idling, poor engine performance, and potential stalling.

2. What can cause the OBDII code P2670 GMC to trigger?

- This code is typically triggered by a malfunction in the actuator high control circuit group 2, leading to low voltage.

3. How does a faulty actuator high control circuit group 2 contribute to low voltage in a GMC vehicle?

- A malfunction in the actuator high control circuit group 2 can disrupt the proper flow of voltage, resulting in low voltage readings.

4. Can driving with the OBDII code P2670 GMC cause further damage to the vehicle?

- Continued driving with this code may worsen engine performance and fuel efficiency, potentially causing more severe issues over time.

5. What are some DIY repair tips for addressing OBDII code P2670 GMC?

- DIY repair tips may include checking and repairing wiring connections, inspecting the actuator circuit components, and resetting the code using an OBDII scanner.

6. How important is it to address the OBDII code P2670 GMC promptly?

- It is recommended to address this code promptly to prevent further damage to the vehicle and ensure optimal engine performance.

7. Is it safe to drive a GMC vehicle with the actuator high control circuit group 2 low voltage issue?

- It is generally not recommended to drive a vehicle with this issue as it can lead to potential engine problems and safety concerns.

8. Can a faulty sensor be a potential cause of the OBDII code P2670 GMC?

- Yes, a faulty sensor related to the actuator high control circuit group 2 can contribute to triggering this code.

9. How can a mechanic diagnose the OBDII code P2670 GMC accurately?

- A mechanic may use an OBDII scanner to retrieve the code, perform a visual inspection of related components, and conduct voltage tests for accurate diagnosis.

10. What are the typical repair costs associated with fixing OBDII code P2670 GMC?

- Repair costs can vary depending on the exact cause of the issue, but they may range from $200 to $500 for parts and labor.

Discuss the causes and fixes for P2670 GMC OBDII Code

Submit a New Comment

Code P2670 GMC comments

No comments found for this page.