Engine-Codes.com
Engine-Codes – Chrysler – P2639 Chrysler

P2639 Chrysler Code - Torque Management Feedback Signal 'A' Low

Quick Answer

The P2639 Chrysler diagnostic trouble code refers to a Torque Management Feedback Signal 'A' Low. Common causes include Faulty torque management sensor, Wiring issues or electrical problems, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2639 Chrysler indicates Torque Management Feedback Signal 'A' Low.
Common causes
Common causes include Faulty torque management sensor, Wiring issues or electrical problems, Malfunctioning engine control module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2639 Chrysler Description

The P2639 Chrysler diagnostic trouble code refers to a Torque Management Feedback Signal 'A' Low. This code typically indicates that there is a problem with the torque management system in the vehicle. Torque management is a critical part of the vehicle's performance, as it regulates the amount of power sent to the wheels based on various factors such as throttle position, engine speed, and vehicle speed.

OBDII Code P2639 Chrysler - Torque Management Feedback Signal 'A' Low
P2639 Chrysler Code - Torque Management Feedback Signal 'A' Low

Common Causes of P2639 Chrysler

  1. Faulty torque management sensor
  2. Wiring issues or electrical problems
  3. Malfunctioning engine control module (ECM)
  4. Software glitches or programming errors
  5. Mechanical issues within the torque management system

Symptoms of P2639 Chrysler

  1. Decreased acceleration or power
  2. Poor fuel efficiency
  3. Engine stalling or rough idling
  4. Illuminated Check Engine Light
  5. Reduced overall performance

How to Fix P2639 Chrysler

  1. Begin by connecting a diagnostic scanner to the vehicle's onboard computer to retrieve the specific trouble code and confirm the issue.
  2. Inspect the torque management sensor and its wiring for any signs of damage or malfunction. Replace any faulty components.
  3. Check the engine control module (ECM) for any errors or software glitches. Perform a reflash or reprogram if necessary.
  4. Conduct a thorough inspection of the torque management system to identify any mechanical issues that may be causing the low feedback signal.
  5. Clear the trouble code from the ECM's memory and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P2639 Chrysler

The typical repair costs for addressing a P2639 Chrysler code can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, you can expect to pay anywhere from $200 to $500 for parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with your local shop for a more accurate estimate based on your vehicle make and model.

Need more information about the P2639 Chrysler code?

Need more information on how to fix the P2639 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2639 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2639 Chrysler Code

1. What does the OBDII code P2639 mean for a Chrysler vehicle?

P2639 indicates that the Powertrain Control Module (PCM) has detected a low voltage or improper signal from the Torque Management Feedback Signal 'A' circuit.

2. What are the common symptoms of the P2639 code in Chrysler vehicles?

Symptoms may include reduced engine performance, poor acceleration, transmission shifting issues, or the Check Engine Light being illuminated.

3. What causes the P2639 code to appear on a Chrysler?

Common causes include a faulty torque management control module, damaged wiring or connectors, a failing PCM, or low system voltage.

4. Can I drive my Chrysler with the P2639 code active?

Driving with this code may lead to reduced performance and potential damage to the drivetrain. It’s best to address the issue promptly.

5. How do you diagnose the P2639 code on a Chrysler?

Diagnosis involves checking for damaged or corroded wiring, testing the torque management sensor, verifying proper power and ground connections, and inspecting the PCM for faults.

6. What repairs can fix the P2639 code in a Chrysler?

Repairs may include replacing damaged wiring, repairing or replacing the torque management module, updating or reprogramming the PCM, or fixing voltage supply issues.

7. How much does it cost to fix the P2639 code on a Chrysler?

The cost can vary depending on the exact issue but typically ranges from $100 to $500, including diagnostics and parts.

8. Can a weak battery cause the P2639 code on a Chrysler?

Yes, a weak or failing battery may lead to low system voltage, which could trigger this code.

9. Does the P2639 code affect fuel efficiency in a Chrysler?

Yes, the code can lead to reduced fuel efficiency due to improper engine torque management.

10. Is P2639 a common issue in Chrysler vehicles?

P2639 is not extremely common but can occur, particularly in older vehicles or those with electrical or module-related issues.

Discuss the causes and fixes for P2639 Chrysler OBDII Code

Submit a New Comment

Code P2639 Chrysler comments

No comments found for this page.