P2628 Mercury Code - Oxygen Sensor Positive Current Trim Circuit High Bank 1 Sensor 1
Quick Answer
The P2628 diagnostic trouble code for Mercury vehicles indicates an issue with the Oxygen Sensor Positive Current Trim Circuit High in Bank 1 Sensor 1. Common causes include Faulty oxygen sensor, Wiring or connector issues in the oxygen sensor circuit, Exhaust leaks near the oxygen sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2628 Mercury indicates Oxygen Sensor Positive Current Trim Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues in the oxygen sensor circuit, Exhaust leaks near the oxygen sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2628 Mercury Description
The P2628 diagnostic trouble code for Mercury vehicles indicates an issue with the Oxygen Sensor Positive Current Trim Circuit High in Bank 1 Sensor 1. This code specifically refers to the oxygen sensor located in the exhaust system before the catalytic converter on the side where the number 1 cylinder is located. The oxygen sensor plays a crucial role in monitoring the amount of oxygen in the exhaust gases, which helps the engine control unit (ECU) adjust the air-fuel mixture for optimal combustion efficiency.
Common Causes of P2628 Mercury
- Faulty oxygen sensor
- Wiring or connector issues in the oxygen sensor circuit
- Exhaust leaks near the oxygen sensor
- Engine running rich or lean
- Issues with the ECU or engine control module
Symptoms of P2628 Mercury
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Increased emissions
How to Fix P2628 Mercury
- Begin by diagnosing the issue using a scan tool to confirm the P2628 code and pinpoint the exact cause.
- Inspect the wiring and connectors in the oxygen sensor circuit for any damage or corrosion. Repair or replace as needed.
- Test the oxygen sensor using a multimeter to ensure proper voltage readings. Replace the sensor if it is faulty.
- Check for exhaust leaks near the oxygen sensor and repair any leaks found to prevent false readings.
- Clear the trouble code from the ECU and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2628 Mercury
The cost of repairing a P2628 code on a Mercury vehicle can vary depending on the specific cause of the issue. In general, the cost of replacing an oxygen sensor can range from $100 to $300, including parts and labor. Additional costs may apply if wiring or connectors need to be repaired or replaced. It is recommended to consult with a qualified mechanic or auto repair shop to obtain an accurate cost estimate based on the specific circumstances of the vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.
Need more information about the P2628 Mercury code?
Need more information on how to fix the P2628 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2628 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2628 Mercury Code
1. What does the OBDII code P2628 indicate on a Mercury vehicle?
The code P2628 indicates that there is an issue with the oxygen sensor positive current trim circuit, specifically showing a high signal in bank 1 sensor 1. This sensor is involved in adjusting the fuel mixture by monitoring oxygen levels in the exhaust gases.
2. What are the common symptoms of code P2628 in a Mercury?
Symptoms may include a check engine light, poor fuel economy, rough engine idle, and potentially increased exhaust emissions. The vehicle might also experience a lack of power during acceleration.
3. What can cause the P2628 code to appear in a Mercury?
Common causes include faulty oxygen sensors, wiring issues (like shorts to voltage or poor connections), problems with the engine control module, or issues with the fuel delivery system.
4. How can I fix the P2628 code on my Mercury?
To fix this code, start by inspecting the wiring and connectors related to the oxygen sensor for any signs of damage or corrosion. If the wiring is intact, consider replacing the oxygen sensor itself. If the problem persists, further diagnostics may be needed to check the engine control module or the fuel delivery system.
5. Is it safe to drive my Mercury with the P2628 code?
While you can still drive your vehicle, doing so with a malfunctioning oxygen sensor can lead to reduced engine performance, higher fuel consumption, and increased emissions. It’s advisable to address the issue promptly to avoid potential further damage to the engine.
6. How do I diagnose the P2628 code on a Mercury?
Diagnosis should start with a visual inspection of the oxygen sensor and its connections. Use an OBDII scanner to confirm the code and freeze frame data. Testing the sensor's output with a multimeter and checking the ECM for updates or faults might also be necessary.
7. Can a faulty oxygen sensor cause other issues in a Mercury?
Yes, a faulty oxygen sensor can affect the air-fuel ratio, leading to engine misfires, increased emissions, and potentially causing the catalytic converter to fail prematurely due to improper balance of the exhaust gases.
8. What tools are needed to resolve a P2628 code?
You'll likely need an OBDII scan tool, a multimeter for electrical testing, and basic hand tools to access and replace the oxygen sensor. Optionally, a professional-grade scanner might be needed for deeper diagnostics.
9. How much does it cost to fix an oxygen sensor related to the P2628 code in a Mercury?
The cost can vary depending on the model and the labor charges. Typically, replacing an oxygen sensor can cost anywhere from $200 to $400, including parts and labor.
Discuss the causes and fixes for P2628 Mercury OBDII Code
Code P2628 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.