P2628 Ford Code - Oxygen Sensor Positive Current Trim Circuit High Bank 1 Sensor 1
Quick Answer
The P2628 Ford diagnostic trouble code (DTC) specifically refers to the Oxygen Sensor Positive Current Trim Circuit High in Bank 1 Sensor 1. Common causes include Faulty oxygen sensor, Wiring issues in the oxygen sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2628 Ford indicates Oxygen Sensor Positive Current Trim Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring issues in the oxygen sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2628 Ford Description
The P2628 Ford diagnostic trouble code (DTC) specifically refers to the Oxygen Sensor Positive Current Trim Circuit High in Bank 1 Sensor 1. This code indicates that the engine control module (ECM) has detected a high voltage or current level in the circuit that controls the oxygen sensor located before the catalytic converter on the bank 1 side of the engine. The oxygen sensor is responsible for measuring the amount of oxygen in the exhaust gases and providing feedback to the ECM to adjust the air-fuel mixture for optimal combustion.
Common Causes of P2628 Ford
- Faulty oxygen sensor
- Wiring issues in the oxygen sensor circuit
- ECM malfunction
- Exhaust leaks
- Engine running too rich or too lean
Symptoms of P2628 Ford
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Increased emissions
- Reduced engine performance
How to Fix P2628 Ford
- Use an OBD2 scanner to confirm the P2628 code and diagnose the issue further.
- Inspect the wiring and connectors in the oxygen sensor circuit for any damage or corrosion.
- Test the oxygen sensor using a multimeter to check for proper voltage and resistance readings.
- Replace the oxygen sensor if it is determined to be faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2628 Ford
The typical repair costs for resolving a P2628 Ford code can vary depending on the specific cause of the issue. Generally, replacing an oxygen sensor can cost between $100 to $250, including parts and labor. However, additional costs may apply if wiring repairs or ECM diagnostics are needed. It's important to consider the specific diagnosis time and labor rates at auto repair shops, which can vary based on location and other factors. It's recommended to consult with a professional mechanic for an accurate cost estimate.
Need more information about the P2628 Ford code?
Need more information on how to fix the P2628 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2628 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2628 Ford Code
1. What does the OBDII code P2628 mean on a Ford vehicle?
P2628 indicates an issue with the Oxygen Sensor Positive Current Trim Circuit High for Bank 1 Sensor 1, meaning the upstream oxygen sensor is reporting abnormally high electrical current.
2. What are the common symptoms of code P2628 on a Ford?
Symptoms may include poor fuel economy, rough idling, reduced engine performance, an illuminated check engine light, and possibly failed emissions tests.
3. What causes the P2628 code on a Ford?
Common causes include a faulty oxygen sensor (Bank 1 Sensor 1), damaged wiring or connectors in the oxygen sensor circuit, a malfunctioning powertrain control module (PCM), or exhaust leaks near the sensor.
4. How do I diagnose code P2628 on my Ford?
Start by checking the oxygen sensor wiring and connectors for damage or corrosion. Use a scan tool to monitor oxygen sensor data and perform resistance tests on the sensor and related circuits.
5. Can I drive my Ford with a P2628 code?
Driving with a P2628 code is generally not recommended as it can lead to poor fuel efficiency, increased emissions, and potential damage to the catalytic converter over time.
6. How do I fix the P2628 code on a Ford?
Repairs may include replacing the oxygen sensor (Bank 1 Sensor 1), repairing or replacing damaged wiring or connectors, fixing exhaust leaks, or reprogramming/updating the PCM if necessary.
7. How much does it cost to repair a P2628 code on a Ford?
Repair costs vary but typically range from $200 to $400, depending on whether the oxygen sensor or wiring needs replacement. PCM repairs or reprogramming could increase costs.
8. Can a bad oxygen sensor cause the P2628 code?
Yes, a faulty oxygen sensor is a common cause of the P2628 code as it may send incorrect signals due to internal failure.
9. What tools are needed to troubleshoot the P2628 code on a Ford?
You’ll need an OBDII scan tool, a multimeter to test electrical circuits, and possibly a smoke machine to check for exhaust leaks.
10. Will clearing the P2628 code solve the problem on my Ford?
Clearing the code may temporarily turn off the check engine light, but if the underlying issue isn’t fixed, the code will likely return.
Discuss the causes and fixes for P2628 Ford OBDII Code
Code P2628 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.