P2628 Dodge Code - Oxygen Sensor Positive Current Trim Circuit High Bank 1 Sensor 1
Quick Answer
The P2628 diagnostic trouble code (DTC) for Dodge vehicles pertains to the Oxygen Sensor Positive Current Trim Circuit High for Bank 1 Sensor 1. Common causes include Faulty Oxygen Sensor: The most common cause of the P2628 code is a malfunctioning oxygen sensor that is unable to accurately measure oxygen levels in the exhaust gases, Wiring or Connector Issues: Damage to the wiring or connectors in the oxygen sensor circuit can prevent proper communication between the sensor and the ECM, ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P2628 code by interfering with the oxygen sensor's readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2628 Dodge indicates Oxygen Sensor Positive Current Trim Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Oxygen Sensor: The most common cause of the P2628 code is a malfunctioning oxygen sensor that is unable to accurately measure oxygen levels in the exhaust gases, Wiring or Connector Issues: Damage to the wiring or connectors in the oxygen sensor circuit can prevent proper communication between the sensor and the ECM, ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P2628 code by interfering with the oxygen sensor's readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2628 Dodge Description
The P2628 diagnostic trouble code (DTC) for Dodge vehicles pertains to the Oxygen Sensor Positive Current Trim Circuit High for Bank 1 Sensor 1. This code indicates that there is an issue with the oxygen sensor located in the exhaust system of the vehicle. The oxygen sensor plays a crucial role in monitoring the amount of oxygen in the exhaust gases, which helps the engine control module (ECM) adjust the air-fuel mixture for optimal performance and fuel efficiency.
Common Causes of P2628 Dodge
- Faulty Oxygen Sensor: The most common cause of the P2628 code is a malfunctioning oxygen sensor that is unable to accurately measure oxygen levels in the exhaust gases.
- Wiring or Connector Issues: Damage to the wiring or connectors in the oxygen sensor circuit can prevent proper communication between the sensor and the ECM.
- ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P2628 code by interfering with the oxygen sensor's readings.
- Exhaust System Leaks: Leaks in the exhaust system can introduce additional oxygen into the exhaust gases, leading to inaccurate readings by the oxygen sensor.
Symptoms of P2628 Dodge
- Check Engine Light: The most common symptom associated with the P2628 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Poor Fuel Economy: A malfunctioning oxygen sensor can cause the engine to run rich or lean, leading to decreased fuel efficiency.
- Rough Idling: An incorrect air-fuel mixture can result in rough idling or engine hesitation.
- Decreased Acceleration: The vehicle may experience a loss of power or decreased acceleration due to an imbalanced air-fuel ratio.
How to Fix P2628 Dodge
- Diagnose the Issue: Use an OBD-II scanner to retrieve the code and determine the specific cause of the problem.
- Inspect Oxygen Sensor: Check the oxygen sensor for any visible damage or signs of wear. Replace the sensor if necessary.
- Check Wiring and Connectors: Inspect the wiring and connectors in the oxygen sensor circuit for any damage or corrosion. Repair or replace as needed.
- Reset the ECM: Clear the code from the ECM's memory using the OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
- Perform a Final Inspection: After the repair, recheck the oxygen sensor's readings and ensure that the Check Engine Light does not reappear.
Cost to Fix P2628 Dodge
The typical repair costs for addressing the P2628 code can vary depending on the specific cause of the issue and the labor rates at auto repair shops. On average, the cost of replacing an oxygen sensor ranges from $100 to $250, including parts and labor. However, additional costs may apply if there are wiring or connector issues that need to be addressed. It's essential to consider factors such as the vehicle's make and model, the location of the repair shop, and the extent of the repair needed when estimating the total cost. It's recommended to consult with a qualified mechanic or service center for a more accurate cost estimate based on the specific circumstances.
Need more information about the P2628 Dodge code?
Need more information on how to fix the P2628 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2628 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2628 Dodge Code
What does the OBDII code P2628 mean for a Dodge vehicle?
P2628 indicates an issue with the Oxygen Sensor Positive Current Trim Circuit High for Bank 1 Sensor 1, meaning the sensor's signal voltage is higher than expected.
What are the common symptoms of a P2628 code on a Dodge?
Symptoms may include poor fuel economy, reduced engine performance, rough idling, and the illumination of the check engine light.
What causes the P2628 code to appear on a Dodge?
Common causes include a faulty oxygen sensor, damaged wiring or connectors, a short circuit, or issues with the engine control module (ECM).
How do I diagnose a P2628 code?
Inspect the wiring and connectors for damage, check the oxygen sensor for proper function, and use a scan tool to monitor live data and confirm the circuit's performance.
Can a P2628 code cause drivability issues?
Yes, this code can lead to symptoms like reduced fuel efficiency, rough idling, and hesitation during acceleration.
Is it safe to drive with a P2628 code on a Dodge?
While the vehicle may still run, driving with this code can cause long-term damage to the engine or catalytic converter if left unresolved.
How do I fix a P2628 code on a Dodge?
Repairs may involve replacing the oxygen sensor, repairing damaged wiring, or addressing issues with the ECM.
What tools are needed to fix a P2628 code?
You will need an OBDII scanner, a multimeter for testing the circuit, and basic hand tools to replace the sensor or repair wiring.
How much does it cost to fix a P2628 code?
Repair costs vary; replacing an oxygen sensor typically costs $100–$300, while wiring repairs or ECM replacement may be more expensive.
Can a dirty air filter cause a P2628 code?
While unlikely, a clogged air filter can affect engine performance and fuel mixture, potentially contributing to oxygen sensor issues.
Discuss the causes and fixes for P2628 Dodge OBDII Code
Code P2628 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.