P2622 Dodge Code - Throttle Position Output Circuit High
Quick Answer
The P2622 diagnostic trouble code for Dodge vehicles indicates a Throttle Position Output Circuit High. Common causes include Faulty throttle position sensor, Wiring or connector issues in the throttle position sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2622 Dodge indicates Throttle Position Output Circuit High.
- Common causes
- Common causes include Faulty throttle position sensor, Wiring or connector issues in the throttle position sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2622 Dodge Description
The P2622 diagnostic trouble code for Dodge vehicles indicates a Throttle Position Output Circuit High. This means that the Engine Control Module (ECM) has detected a higher than normal voltage signal coming from the throttle position sensor. The throttle position sensor is a crucial component that monitors the position of the throttle valve, which in turn determines how much air and fuel is delivered to the engine. When the throttle position output circuit is reading too high, it can cause a variety of issues with the vehicle's performance and overall drivability.
Common Causes of P2622 Dodge
- Faulty throttle position sensor
- Wiring or connector issues in the throttle position sensor circuit
- ECM malfunction
- Corrosion or damage to the throttle position sensor circuit
- Incorrect throttle position sensor calibration
Symptoms of P2622 Dodge
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or surging during acceleration
- Reduced engine performance
How to Fix P2622 Dodge
- Diagnose the issue by using a scan tool to read the codes and testing the throttle position sensor for proper voltage output.
- Inspect the wiring and connectors in the throttle position sensor circuit for any damage or corrosion.
- Replace the throttle position sensor if it is found to be faulty or out of calibration.
- Clear the trouble codes and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostic testing may be required to pinpoint the exact cause of the high throttle position output circuit.
Cost to Fix P2622 Dodge
The typical repair costs for addressing a P2622 Throttle Position Output Circuit High code can vary depending on the specific cause of the issue and the labor rates in your area. Generally, the cost of replacing a throttle position sensor can range from $100 to $200, while diagnosing and repairing wiring or connector issues may add additional costs. Overall, the total repair cost for this issue can range from $150 to $400, including parts and labor. It is advisable to consult with a trusted mechanic or repair shop to get a more accurate estimate based on your vehicle's make and model.
Need more information about the P2622 Dodge code?
Need more information on how to fix the P2622 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2622 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2622 Dodge Code
1. What does the OBDII code P2622 mean on a Dodge vehicle?
Code P2622 indicates a problem with the throttle position output circuit, specifically that the circuit voltage is higher than expected.
2. What are the common symptoms of the P2622 code in a Dodge?
Symptoms may include poor throttle response, reduced engine performance, stalling, or the Check Engine Light illuminating.
3. What causes the P2622 code to appear in Dodge vehicles?
Common causes include a faulty throttle position sensor (TPS), damaged wiring or connectors in the TPS circuit, or issues with the vehicle's engine control module (ECM).
4. Can I drive my Dodge with the P2622 code active?
Driving with this code is not recommended, as it may lead to unsafe driving conditions due to unpredictable throttle behavior.
5. How do you diagnose the P2622 code on a Dodge?
Diagnosis involves scanning for codes, visually inspecting the TPS wiring and connectors, testing the TPS for proper voltage range, and checking the ECM for faults.
6. How do you fix the P2622 code on a Dodge?
Repairs may involve replacing the throttle position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM.
7. What tools are needed to troubleshoot the P2622 code in a Dodge?
Tools include an OBDII scanner, a multimeter for testing voltage, and basic hand tools for inspecting and replacing components.
8. How much does it typically cost to repair the P2622 code in a Dodge?
Costs can vary, but TPS replacement typically ranges from $150 to $300, while ECM repairs can exceed $500 depending on the issue.
9. Can a dirty throttle body cause the P2622 code?
While rare, a dirty throttle body may affect sensor readings and performance, so cleaning it as part of maintenance might help.
10. Does the P2622 code require ECM replacement?
ECM replacement is only necessary if the module is diagnosed as faulty after verifying the TPS and circuit components.
Discuss the causes and fixes for P2622 Dodge OBDII Code
Code P2622 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.