P249E Chevrolet Code - Closed Loop Reductant Injection Control At Limit – Flow Too High
Quick Answer
The P249E code for Chevrolet vehicles indicates an issue with the Closed Loop Reductant Injection Control, specifically that the flow is too high. Common causes include Faulty reductant injector, Malfunctioning reductant flow sensor, Wiring or connector issues in the reductant injection system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P249E Chevrolet indicates Closed Loop Reductant Injection Control At Limit – Flow Too High.
- Common causes
- Common causes include Faulty reductant injector, Malfunctioning reductant flow sensor, Wiring or connector issues in the reductant injection system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P249E Chevrolet Description
The P249E code for Chevrolet vehicles indicates an issue with the Closed Loop Reductant Injection Control, specifically that the flow is too high. This system is part of the vehicle's emissions control system, responsible for injecting a reductant (typically diesel exhaust fluid) into the exhaust stream to reduce harmful emissions. When the flow is too high, it can lead to inefficient operation of the system, potentially resulting in increased emissions and reduced fuel efficiency.
Common Causes of P249E Chevrolet
- Faulty reductant injector
- Malfunctioning reductant flow sensor
- Wiring or connector issues in the reductant injection system
- Defective control module
- Contaminated or low-quality reductant fluid
Symptoms of P249E Chevrolet
- Check engine light illuminated
- Reduced fuel efficiency
- Failed emissions test
- Rough idling or engine misfires
- Reduced engine performance
How to Fix P249E Chevrolet
- Perform a diagnostic scan to confirm the P249E code and identify the specific component causing the issue.
- Inspect the reductant injector, flow sensor, wiring, and connector for any signs of damage or corrosion.
- Test the reductant injection system components to determine if they are functioning properly.
- Replace any faulty components, such as the reductant injector, sensor, or control module.
- Clear the diagnostic trouble codes, reset the system, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P249E Chevrolet
The cost of repairing the P249E code for a Chevrolet vehicle can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair costs for this type of issue can range from $200 to $600. However, it's important to note that labor rates and part prices can differ based on location, vehicle make and model, and the shop performing the repairs. It's recommended to obtain quotes from local auto repair shops to get a more accurate estimate for the repair.
Need more information about the P249E Chevrolet code?
Need more information on how to fix the P249E Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P249E Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P249E Chevrolet Code
1. What does the OBDII code P249E mean on a Chevrolet?
P249E indicates that the closed-loop reductant injection control system has detected excessively high flow rates, which may affect the vehicle's emissions control.
2. What are the common symptoms of P249E in a Chevrolet?
Symptoms may include the check engine light turning on, reduced fuel efficiency, erratic engine performance, and increased emissions.
3. What causes the P249E code to appear on a Chevrolet?
Common causes include a malfunctioning reductant injector, a faulty exhaust gas temperature sensor, a clogged or damaged particulate filter, or issues with the reductant pump.
4. Can I drive my Chevrolet with the P249E code active?
While the vehicle may still be drivable, ignoring this code can lead to higher emissions and potential damage to the exhaust system over time.
5. How is the P249E code diagnosed on a Chevrolet?
Technicians typically use an OBDII scanner to retrieve the code, inspect the reductant system components, and check for sensor or injector malfunctions.
6. What repairs are commonly needed to fix the P249E code?
Repairs may include cleaning or replacing the reductant injector, replacing damaged sensors, addressing clogged filters, or repairing wiring connections in the reductant system.
7. How much does it typically cost to fix a P249E code on a Chevrolet?
The repair cost depends on the specific issue, but it can range from $200 to $800, depending on parts and labor.
8. Can a P249E code be caused by bad diesel exhaust fluid (DEF)?
Yes, contaminated or incorrect diesel exhaust fluid can cause issues in the reductant system, potentially triggering the P249E code.
9. How can I prevent the P249E code from occurring on my Chevrolet?
Regular maintenance of the reductant system, using high-quality DEF, and promptly addressing exhaust system issues can help prevent this code.
10. Will clearing the P249E code resolve the issue on a Chevrolet?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P249E Chevrolet OBDII Code
Code P249E Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.